This powerful 1200W Aurora Infrared Bar Heater from Mirrorstone Heating is perfect for your home.
Either inside or out, it is powered by 1200W and emits heat with a beautiful orange glow. This Near IR heater is made from solid aluminium materials and carbon fibre elements to will reach high surface temperatures between 200 and 300°C.
Recommended for a high-up installation, it is IP44 rated for protection against dust and sprays of water. It will heat an area of roughly 15 – 18m² for an incredibly wide scope of heat.
Please note that the advised heated areas are for guidance only. For a more accurate heated area that is more relevant to your home, please either use our Calculator located at the top of this page, or speak to one of our Customer Services advisors about your room.
Operating closer to the red end of the spectrum, Near IR heaters can be characterised by their orange glow of the filament when they are on. They are synonymous with outdoor heaters.
Emitting heat at much higher temperatures, they are perfect for bigger spaces that will require much more warmth. However, they are not limited to commercial use as you may assume. Near IR heat is used in homes and also in health lamps.
Infrared heating is a brilliant way of heating any space. Here are a few of the reasons why…
Incredibly discreet, our units will not draw attention to themselves or take away from your existing décor. Being wall mounted or hung from the ceiling means that they remain out of sight or discreet in any location.
Unlike convection or gas heaters, they are enormously beneficial to your health. They will not circulate dust around the space to trigger health conditions like asthma or bronchitis. Also, they keep the air dry to reduce the risk of mould or mildew.
Last, but certainly not least, you can save a lot of money with IR heating – your energy bills can be reduced by up to 60% by making the switch.
There is not a lot to say when it comes to maintaining your heater. All you will need to do is wipe it down with a damp cloth, always remembering to give it time to cool before you clean it.
If the heater ever collects a light layer of dust over time, a simple clean should do the trick to restore it to its beauty.
As it is plug-and-play, you will never need to fork out expensive service or repair bills.
Our heaters are incredibly easy to install and you won’t even need any professional help. Embrace your inner DIY-er to mount this Bar Heater.
Coming to you with brackets already, you will need to drill two into the wall and affix two brackets onto the back of the unit to hang.
For your convenience it can be mounted either horizontally or vertically. We suggest that it is at a minimum height of 1.8m above the floor or any height where it cannot be touched.
If suspended from the ceiling, it is best to have the heater facing directly down or at a 45° angle to the ceiling for maximum distribution of warmth.
Mirrorstone Heating offer an amazing 2-year warranty with each unit so you never need worry about it. You can extend this to 5 years at no extra cost.
Not to mention, we offer a 14-day home trial period. Within this time, you can test your heater and if it is not to your liking, you can send it back to us to return or exchange for something better suited to your needs.
Check out our promotions page before you make your purchase to save up to 10% off your heater.
If you need any other information, please don’t hesitate to get in touch with us today. Give us a call on 0116 321 4124, send an email to firstname.lastname@example.org or take a look at our Facebook, Twitter and Instagrampages. You can also subscribe to our YouTube channel for informative videos.
Finance is a fantastic way to spread the cost of your purchase. To make it easy we've partnered with Duologi whose smart technology lets you apply for and then complete the loan application quickly and entirely online.
First add the items you wish to purchase to your basket. When you reach checkout select the best finance option for you and choose 'Pay with Duologi'. The quick application form takes no more than a couple of minutes to complete and then you'll receive an instant decision.
Before you apply please note you will only be considered for finance if you:
We offer a range of interest-free and interest bearing finance options to help you spread the cost of your purchase over 3, 6 or 12 months. The value of the loan needs to be over £300, all you need to do is pay a 20% deposit up front.
All panels come with free delivery within 2-3 days, and next day delivery is available for £5.99.
You can return your panel if you are not happy with it within 14 days of receiving it.
To install your panel or bar heater, drill 4 holes into your wall as per the mounting template provided with your heater.
For panels, insert the wall plugs, followed by the screws, and use the cross-hair bolt insertion hole brackets on the back of the panel to mount it in place.
For bar heaters, use the provided screws to mount the brackets onto your wall, and then onto the back of the heater. Use the provided wing nuts to secure the wall brackets and heater brackets together at an angle best suited for your area.
Plug the heater into your mains, or get a qualified electrician to hardwire it for you.
Infrared heaters use up to 60% less energy than electric convection heaters, because they warm up objects rather than the air.
As they have no moving parts, they require zero maintenance.
At just 22mm thick, and best installed at head height, they can save massive amounts of space, allowing you to use your entire floor space.
Our infrared panels are far better looking than conventional radiators, giving your home a more modern look.
Once they have reached the end of their huge 100,000 hour lifespan, they almost fully recyclable, further helping the environment even after they’re no longer fit for use.
|Dimensions (mm)||700mm x 160mm x 80mm|
|Warranty||2 Years Upgradable to 5 Years|
|Heating Element||Carbon Fibre|