Natural IR Heat
Hurry Now! 10% Off All Heaters! Use Code: TAKE10
Add some powerful heat to your home, office, or warehouse with a fantastic Mirrorstone infrared bar heater. Efficient, eco-friendly, and better looking than a radiator infrared is the future of heating technology. This bar heater measures approximately 940mm by 150mm, and with a 1200w heater, can heat an area of around 18m2. With a depth of just 63mm, this bar heater will not stick out too much.
Made from premium aluminium materials, you can trust this heater will not fail. It can reach a surface temperature of around 200-300˚C. This is nothing to be alarmed about however, as they can be installed far higher up on the wall than a traditional radiator, right up near the ceiling. This means it’s far out of reach of any accidental touches.
It has an IP44 rating, meaning it is protected against splashes of water. However, we would advise that if it’s installed outside, it is under cover, just in case of heavy rain.
Please note that the advised heated areas are for guidance only. For a more accurate heated area that is more relevant to your home, please either use our Calculator located at the top of this page, or speak to one of our Customer Services advisors about your room.
Infrared heating is a brilliant new way of heating your indoor or outdoor space. It is more efficient, more eco-friendly, and, frankly, looks better than traditional heating methods. It heats your room in a completely different way to a conventional radiator. Rather than heating the air around it, it actually heats the objects in the room, which requires less energy. It can actually save around 60% on your heating bills!
It fires infrared beams around the room, which bounce off the objects, leaving them warmed. By doing this, you can avoid convectional currents. When a traditional heater warms the air, it rises to the ceiling, cools, and falls again, requiring more heat. This is obviously less efficient, and can have a negative effect on your health. That’s because it promotes dust circulation, mould growth, and cold spots. Because an infrared heater does not do this, it can actually be seen as better for your health.
Infrared heating is also completely safe, even though it sounds scary. It’s just the same technology that TV remote controls use! It provides the same kind of heat that the sun does, but without any nasty UV radiation.
At first glance, it might be difficult to know exactly what your infrared bar heater is up to at any given moment.
If you’re sat some distance away from the heater, you may not know if it’s on or not. You don’t need to worry though, as we’ve included a little something to make your life easier.
To make it simple, whenever the panel is on and emitting heat, a small red LED light will turn on. When the bar heater is off, the LED will follow suit and switch off itself.
This useful feature lets you know when your heater is doing its job and when it’s been told not to, so you can rest assured it is definitely doing as you’ve asked.
These heaters are very easy to install – you won’t need any professional help at all.
You won’t need to get in touch with any plumbers, electricians, or carpenters, as it’s honestly just a one-person job. The heaters are fully plug-and-play compatible, so you can do it all yourself.
The only real work that needs doing is just the mounting of the heater.
It’s simple to do, as the brackets are adjustable. Just drill the holes into the wall, and you’re ready to mount it. With the two rear-mounted brackets, screw the heater into the wall.
As the brackets are adjustable, too, so you can direct the heat to different areas.
Please be aware that if the units are not cleaned regularly, a build-up of dust may appear. Find out more about how to maintain your heaters here!
Included with our Mirrorstone infrared bar heaters is a simply excellent 14-day home trial period, so you could either return or exchange it, if you change your mind.
Mirrorstone also provide these with an amazing 2-year warranty, so you may shop with confidence. You can extend this to 5 years at no extra cost.
If you require any extra information about this, or any of our other heaters, then don’t be afraid to get in touch. Call us on 0116 321 4124, email us at firstname.lastname@example.org, or take a look at our Facebook and Twitter pages.
Finance is a fantastic way to spread the cost of your purchase. To make it easy we've partnered with Duologi whose smart technology lets you apply for and then complete the loan application quickly and entirely online.
First add the items you wish to purchase to your basket. When you reach checkout select the best finance option for you and choose 'Pay with Duologi'. The quick application form takes no more than a couple of minutes to complete and then you'll receive an instant decision.
Before you apply please note you will only be considered for finance if you:
We offer a range of interest-free and interest bearing finance options to help you spread the cost of your purchase over 3, 6 or 12 months. The value of the loan needs to be over £300, all you need to do is pay a 20% deposit up front.
All panels come with free delivery within 2-3 days, and next day delivery is available for £5.99.
You can return your panel if you are not happy with it within 14 days of receiving it.
To install your panel or bar heater, drill 4 holes into your wall as per the mounting template provided with your heater.
For panels, insert the wall plugs, followed by the screws, and use the cross-hair bolt insertion hole brackets on the back of the panel to mount it in place.
For bar heaters, use the provided screws to mount the brackets onto your wall, and then onto the back of the heater. Use the provided wing nuts to secure the wall brackets and heater brackets together at an angle best suited for your area.
Plug the heater into your mains, or get a qualified electrician to hardwire it for you.
Infrared heaters use up to 60% less energy than electric convection heaters, because they warm up objects rather than the air.
As they have no moving parts, they require zero maintenance.
At just 22mm thick, and best installed at head height, they can save massive amounts of space, allowing you to use your entire floor space.
Our infrared panels are far better looking than conventional radiators, giving your home a more modern look.
Once they have reached the end of their huge 100,000 hour lifespan, they almost fully recyclable, further helping the environment even after they’re no longer fit for use.
|Dimensions (mm)||940mm x 150mm x 63mm|
|IP Rating||IP44 - Protected against splashes of water|
|Warranty||2 Years Upgradable to 5 Years|
Is there a small version than the 1200 and can it be ceiling mounted. Thx
Hi, Thjs looks great with many positive reviews, but it isn't clear if this is suitable for a wood cabin given how hot the unit gets when running. Is there a fire risk or special considerations when fitting it wood walls or ceilings to ensure safety and reliability? Thanks Mark
Hello As shown in the picture the power switch is on the right side, can this be rotated 180 so it’s on the left side.
Would this be suitable in a campervan?
What are the guidelines/ instructions for mounting distances from combustible surfaces such as plasterboard ceiling or timber. Can you forward an installation guide. Thanks
Having difficulty with the internet connection and can't find any details re connecting to the wifi, using the timer, setting temperatures etc. Can you please help.Regards Peter Bucklkey
would this be suitable to run from a hearth on the fireplace surround thanks
We are short of space in our kitchen, if fitted to wall how much space do we need between ceiling and heater.We were thinking putting it above door.
I have a gazebo on the patio approximately 11m2 which I would like to heat. Being open the infrared style seems best. What size would you recommend bearing in mind the open sides. It can be protected under the roof.
Is there a guide for installation onto a wall?
Where are your panels made. Are they made in the UK...?
Looking into getting the 1200w bar for a bedroom in a static, how much does it cost to run an hour, we are on 11p per KWH.
We have just purchased the 1200w bar heater. Can we fix this vertically on the wall.
Hi, Could the 1200w Helios Bar Heater be installed on the ceiling over a bath/shower area ? Thanks Guy
I'm looking at the 1200w Helios Infrared Bar Heater. Can this be used with a timer? I need to install heating in a holiday chalet which is let out to holiday makers, but don't want my guests to have the heating on 24/7. What do you suggest? Also, how is the heat controlled. is there a thermostat or different heat settings?
If these are positioned high, and we want to put one in a swimming pool enclosure, and there's only 1.5m cable, how is it switched on /off?
Hi what length is the wire on these bar heaters to plug in ?
Hi, can these bar heaters be hung from the ceiling?
Hi, is this better suitable for outdoors? It will be positioned under some soffit board. Do you have covers to protect when not in use? Thanks
1. Does it 'glow'? If in a dark room e.g. bedroom will it be visibly on? 2. Since it presumably blasts out infrared, does it affect operation of infrared remote controls in the same room?
Hello,can this heater be connected directly to the mains by an electrician?Are any extras needed like a thermostat? Thank you
Is this suitable for a small bathroom and are we able to remove the plug to wire into the socket provided for a heater?
Can't see the answer you're looking for? Feel free to ask any question about this product and our helpful, friendly staff will answer it as soon as possible.