Natural IR Heat
Hurry Now! 10% Off All Heaters! Use Code: BIG10
For your warehouse, office, garden or home to get an additional level on heat that conventional heaters won’t provide as efficiently, try out a Mirrorstone infrared bar heater. It measures approximately 1500mm by 150mm, with a 2400w power output and there are 2 finishes available that you can choose from: Black or White. This is enough to heat an area that’s approximately 38m2! With a depth of just 63mm, there’s no need to worry about this heater being obtrusive when it’s mounted on either your wall or ceiling. This heater is made from solid aluminium materials, meaning it’s both great to look at, and sturdy. It can reach a surface temperature of approximately 200-300˚C, which is hotter than a traditional radiator. However, it shouldn’t be a problem, because it can be installed much higher up the wall than a standard heater, or even on the ceiling. This puts it well out of reach of prying fingers.
It comes with an IP44 rating, so it’s protected against any accidental splashes of water. However, if it is to be installed outside, then it’s best to be under cover, in case of any heavy rain.
Please note that the advised heated areas are for guidance only. For a more accurate heated area that is more relevant to your home, please either use our Calculator located at the top of this page, or speak to one of our Customer Services advisors about your room.
Very. Infrared heating has quite a few advantages over more traditional heating methods, especially its efficiency. Infrared heating works by heating the objects in the room, rather than the air around it, as radiators do. This is more efficient, as the surface area of the objects is smaller than the volume of air in any given space. This helps infrared heating to help you save up to 60% on your heating bills!
Infrared heating shoots infrared beams around the room, which bounce off of the objects in the room, leaving them warmed. Traditional heaters warm the air, which causes convectional currents. This is where the warm air rises, cools, and falls again, requiring more heat. It also causes dust circulation, mould growth, and cold spots, which can negatively affect your health.
As infrared heating does not do this, it can be seen as better for your health. Infrared heating is also completely safe, despite the idea of radiation sounding scary. It’s completely harmless, being the same that TV remote controls use, or what our bodies and the sun emit. However, infrared panels do not emit any ultraviolet rays like the sun does.
Our 1800w Helios Infrared Bar Heater comes with Wi-Fi connectivity built in out of the box. What does this mean for you? Simple: all you need to do is download the Smart Life app on your Android or iOS device, connect the app to the bar heater using the instructions in the manual in the box (or by downloading the manual directly from us), and that's it! You can take advantage of features such as the hourly timer function, zone control and family sharing! It really is that easy to take your heating into the 21st century!
Simply scan the QR code on the left to download the Smart Life app, and you'll be a step closer to enjoying smart heating!
You don’t need to worry about trying to install this heater, as it’s very easy to mount. You won’t need any additional help at all – let alone any electricians, plumbers or carpenters. You can do it all yourself! They are completely plug-and-play compatible, so there’s no real work to do, other than actually mounting the heater onto the wall.
It’s very easy to do, with no difficult steps at all. All you need to do is drill a few holes into the wall, and you’re ready to go. Just screw the two rear-mounted brackets into the wall, and you can plug it into the wall. Remember, the brackets are actually adjustable, too, so you can direct the heat at specific angles.
If you’re hoping to control this heater from the comfort of your own chair, without having to resort to walking over to use the control panel, then you’re in luck.
This heater is fully remote controllable, and the IR signal remote control is included! It’s very easy to use, it’s slim, it looks great, and it makes your life much more convenient.
You can adjust the temperature with ease, whether you need more or less heat to help you get comfortable.
You can switch the display on and off, if you wish to make the heater look a little more discreet. You can also set a sleep timer with the remote, if you wish for the heater to turn off after a certain amount of hours.
If you’re after a little more information on what the heater is up to, then it’s not too difficult to find out.
The helpful LED screen on the right-hand side of the panel will let you know anything you need to know about what’s going on with your panel at any given moment.
Imagine you’re not anywhere near the heater and you need to know what it’s doing – for example, you’re inside, and it is outside.
Luckily, the LED screen lets you know what the desired target temperature is, and there’s a blue graphic above this that flickers and bounces to let you know that the bar heater is actually emitting heat. It also helps you when you set the sleep timer.
Please be aware that if the units are not cleaned regularly, a build-up of dust may appear. Find out more about how to maintain your heaters here!
Included with all of our Mirrorstone infrared bar heaters is a fantastic 14-day home trial period, so you could either return or exchange it, if you change your mind.
Mirrorstone also provide these with an outstanding five-year warranty, so you may shop with confidence.
All of our white infrared heating panels come with a brilliant 14-day home trial period, so if you change your mind, you can either return or exchange it. Mirrorstone also give you an incredible 2-year warranty, so there’s no need to worry about purchase protection. You can also upgrade this to 5 years at no extra cost.
If you have any questions about this panel heater, or infrared heating in general, then don’t be afraid to give us a shout. Call us on 0116 321 4124, email us at email@example.com, or check out our Facebook and Twitter pages.
Finance is a fantastic way to spread the cost of your purchase. To make it easy we've partnered with Duologi whose smart technology lets you apply for and then complete the loan application quickly and entirely online.
First add the items you wish to purchase to your basket. When you reach checkout select the best finance option for you and choose 'Pay with Duologi'. The quick application form takes no more than a couple of minutes to complete and then you'll receive an instant decision.
Before you apply please note you will only be considered for finance if you:
We offer a range of interest-free and interest bearing finance options to help you spread the cost of your purchase over 3, 6 or 12 months. The value of the loan needs to be over £300, all you need to do is pay a 20% deposit up front.
All panels come with free delivery within 2-3 days, and next day delivery is available for £5.99.
You can return your panel if you are not happy with it within 14 days of receiving it.
To install your panel or bar heater, drill 4 holes into your wall as per the mounting template provided with your heater.
For panels, insert the wall plugs, followed by the screws, and use the cross-hair bolt insertion hole brackets on the back of the panel to mount it in place.
For bar heaters, use the provided screws to mount the brackets onto your wall, and then onto the back of the heater. Use the provided wing nuts to secure the wall brackets and heater brackets together at an angle best suited for your area.
Plug the heater into your mains, or get a qualified electrician to hardwire it for you.
Infrared heaters use up to 60% less energy than electric convection heaters, because they warm up objects rather than the air.
As they have no moving parts, they require zero maintenance.
At just 22mm thick, and best installed at head height, they can save massive amounts of space, allowing you to use your entire floor space.
Our infrared panels are far better looking than conventional radiators, giving your home a more modern look.
Once they have reached the end of their huge 100,000 hour lifespan, they almost fully recyclable, further helping the environment even after they’re no longer fit for use.
|Available Finishes||Black, White|
|Dimensions (mm)||1500mm x 150mm x 63mm|
|IP Rating||IP44 - Protected against splashes of water|
|Warranty||2 Years Upgradable to 5 Years|
|Product Features||Wi-Fi connectivity to the Smart Life app|
I recently purchased this 2400w Helios Bar heater and am struggling to get it to connect to our wifi using the Smart life app. I have changed the settings so that it is the 2.4GHz in the options, but the instructions in it aren't very clear. It says to hold a reset button on the heater... there isn't one! its also asking to confirm rapid blinking then a slow blink, but it never changes. The instructions in the guide don't help to troubleshoot at all. It's very confusing. Can anyone help please?
Please can you tell me how to release the lock function using remote control. Thank you
What's the best placement of the heater? Can it be fitted as a standard radiator or it is best positioned high up on a wall?
Would the 2400W bar heater be suitable for heating an open plan living and kitchen area of 26 square meters in a static caravan? And would you recommend it be ceiling or wall mounted. Secondly, would 1 of these heaters or 2 of the 1200w heater be better for heating, thank you.
I have installed a 2400 watt Helios heater. As per guidance from your Jess Hancock I have tried to use it in conjunction with a Hive plug. Unfortunately when the plug switches off the heater only comes back on on standby awaiting remote control turn on. In addition the set temperature is at 35 degrees C. Is it possible to adjust this switch on temperature to 20 degrees C? Is it possible to stop the heater going to standby when switched off then on by a Hive plug? I would need to do both these things to allow Hive control. Many thanks, Nigel.
I have just purchased a 2400 watt heater for our conservatory. The heater will be mounted on a house wall nominally 2.2 m high. It will be about the same high as some pendant light fittings - glass shade and metal. What is the minimum distance recommended from the lights? I may be able to lift them to 2.3 to 2.4 m. Or I may be able to fix the heater higher by 200 mm. Which is the best option? Also I am to install a spur socket near the heater. The instructions say not above - if so can it go below and in that case how close? Many thanks, Nigel.
Hi How does the timer work? Could you set it to come on and off for more than 1 cycle over 24 hours, and is there a maximum length of time you can have the heater in the off position? Could the heater be wired into an independent timer? Regards
Can you confirm the bar heater can be mounted from a ceiling and as they're running at 230 voltage am I correct in thinking I can hardwire the unit onto the terrace of our holiday home in Spain?
Hi Do you have installation instructions re: the minimum distances from surrounding structures ? Thanks
Hi. Do your infrared heaters emit light (other than from the digital display)? Thanks
Good evening, Can this heater be install outside on a wall?
Are these suitable to be wall mounted to a WOODEN log cabin gazebo style structure? It says the surface temp is 115C. Will this burn the wood and cause a fire? Thanks
Does this come with the remote control? Thank you
Hi, what is the price per kilowatt per hour for this unit. Many thanks
Hi , are these suitable for conservatory? Thanks
Are these heaters plug in or do they need to be hard wired? If they are plug in how long are the wires? Thank you
Can't see the answer you're looking for? Feel free to ask any question about this product and our helpful, friendly staff will answer it as soon as possible.