This panel is currently available for pre-order and will be with us around 28th May 2021. We apologise for any inconvenience caused.
Make a massive improvement to your home heating with a fantastic new infrared heater. They have so many benefits when compared with traditional central heating methods. This panel measures 995mm by 595mm, and has a wattage of 580w.This means it can heat an area of roughly 9-10m2. It has a depth of just 22mm, so it sits snugly against the wall without ever looking clunky and ugly like a traditional radiator.
This panel is made from premium FIR Coating, which can reach temperatures of around 75-95˚C. This is a similar temperature to a traditional radiator, but unlike those, you can mount these well out of reach. It comes with an IP rating of 54, meaning it can manage with splashes of water.
Please note that the advised heated areas are for guidance only. For a more accurate heated area that is more relevant to your home, please either use our Calculator located at the top of this page, or speak to one of our Customer Services advisors about your room.
By choosing the ceiling mount option when purchasing your panel, a Suspension Kit will also be dispatched with your order. We advise leaving a gap of at least 5cm between the ceiling and panel once installed in order to ensure adequate airflow behind the heater.
This panel will come with a clear film on its front that needs to be peeled off before first use. If you use the heater before peeling the film off, the film may discolour and melt onto the surface of the heater.
Infrared heating is extremely eco-friendly, and it saves you plenty of money on your heating bills. In fact, infrared heating actually has the capability of saving you 60% on your heating bills every time! Infrared heating works by firing infrared beams around your room, which bounce of off the objects, leaving them warm. This is more efficient than convectional heaters, as they just heat the air, which rises to the ceiling.
With these hot air currents that conventional heaters create, you can get cold spots, mould and mildew, and dust circulation – all of which is minimised by infrared heating, which can benefit your health.
You know infrared heaters are safe, as it’s just the same technology that’s used in TV remote controls.
Our infrared panels come with a brand new, highly advanced premium FIR Coating to help maximise the performance of your heater. It’s heat-resistant – meaning it can withstand temperatures up to 200oC without yellowing over time.
Not only that, but it will also help the carbon crystal heating element inside the panel distribute the IR waves better than ever before, thanks to a higher thermal efficiency, resulting in even more warmth in your home.
To top it all off, the coating is also far more secure than ever before, as it is fire resistant, ensuring your family and your home stay safe and warm.
Fully Lot20 compliant, our NXTGEN heaters have a rating of 39% out of a maximum 40%, and are more efficient than necessary.
They have automated temperature control, which regulates the temperature of the room to one of your choice. They have a 7-day timer, too, so getting those warm lie-ins at the weekend is even easier.
With the adaptive start function, your panel will switch on before your set time, in order to ensure the room reaches your desired temperature at the right time. However, it comes on at exactly the right time, by measuring the temperature early on.
There’s open window detection, so if it detects the temperature has dropped by 1.5˚C in 3 minutes, it switches off. For more info, see our NXT Gen IR Panel manual.
Every NEXTGEN panel comes equipped with a remote control that allows you to take control of the innovative features they have. It’s straightforward to use, with little messing about.
It controls the electronic thermostat, which is more accurate than more traditional mechanical thermostats, so you can have full control over how hot or cold you like your home.
It’s simple to adjust the temperature of the panel, and to set different timers. It also controls the adaptive start feature, so you know you’re not just wasting energy.
Plus, there’s no more walking to the boiler or your thermostat any more, or having to turn down radiators at the source.
The remote can also be paired to multiple heaters, too, to make it easier for you.
There are so many features packed into every NXT Gen Heating Panel – so much so that it may get confusing as to when it’s supposed to be on.
There’s no need to worry however, as we’ve thought of this and how to get around it already.
In the corner of every NXT Gen is a highly simple yet equally effective blue LED light.
The LED will light up when the panel is on and emitting heat, and will switch off when it stops.
This helps give you more clarity on when the panel is actually doing its job – which may answer some questions when the room feels a bit cooler than it should!
These panels are really easy to install. You don’t have to worry about any complex electrical or plumbing work, as they are completely plug-and-play compatible. In order to mount them on either the ceiling or the wall, only very basic work is needed.
First, you need an empty space for it to occupy. Second, using the helpful stencil provided, drill two holes in the wall and slip the screws in.
After that, all you need to do is hang the panel from its two brackets on the back onto the screws. In terms of powering the panel, it comes with a 2m long cable and a UK mains 3-pin plug, so it’s simple to just plug in.You can also make the heater portable, with our infrared heater stands.
All of our white infrared heating panels come with a comprehensive 2-year warranty, to reassure you about your purchase. This is also extendable to 5 years for free.
We also give you a fantastic 14-day home trial period, so if you change your mind about your purchase, you can either exchange it or get a refund.
If you wish for some extra information about infrared heating in general, then don’t be afraid to get in touch. Call us on 0116 321 4124, email us at firstname.lastname@example.org, or check out our Facebook and Twitter pages.
Finance is a fantastic way to spread the cost of your purchase. To make it easy we've partnered with Duologi whose smart technology lets you apply for and then complete the loan application quickly and entirely online.
First add the items you wish to purchase to your basket. When you reach checkout select the best finance option for you and choose 'Pay with Duologi'. The quick application form takes no more than a couple of minutes to complete and then you'll receive an instant decision.
Before you apply please note you will only be considered for finance if you:
We offer a range of interest-free and interest bearing finance options to help you spread the cost of your purchase over 3, 6 or 12 months. The value of the loan needs to be over £300, all you need to do is pay a 20% deposit up front.
All panels come with free delivery within 2-3 days, and next day delivery is available for £5.99.
You can return your panel if you are not happy with it within 14 days of receiving it.
To install your panel or bar heater, drill 4 holes into your wall as per the mounting template provided with your heater.
For panels, insert the wall plugs, followed by the screws, and use the cross-hair bolt insertion hole brackets on the back of the panel to mount it in place.
For bar heaters, use the provided screws to mount the brackets onto your wall, and then onto the back of the heater. Use the provided wing nuts to secure the wall brackets and heater brackets together at an angle best suited for your area.
Plug the heater into your mains, or get a qualified electrician to hardwire it for you.
Infrared heaters use up to 60% less energy than electric convection heaters, because they warm up objects rather than the air.
As they have no moving parts, they require zero maintenance.
At just 22mm thick, and best installed at head height, they can save massive amounts of space, allowing you to use your entire floor space.
Our infrared panels are far better looking than conventional radiators, giving your home a more modern look.
Once they have reached the end of their huge 100,000 hour lifespan, they almost fully recyclable, further helping the environment even after they’re no longer fit for use.
|Surface Material||Premium FIR Coating|
|Dimensions (mm)||995mm x 595mm x 22mm|
|Frame Colour||White Aluminium|
|IP Rating||IP54 - Protected against splashes of water|
|Warranty||2 Years Upgradable to 5 Years|
|Product Features||Built in Thermostat with Remote Control|
|Requirements||Eco Design Requirements for Electric Local Space Heaters|