Treat your home to the NXTGEN of discreet heating. If you’re searching for a more discreet, smarter, more efficient way of heating your home, then you’ve come to the right place. This Mirrorstone heater measures approximately 995mm by 595mm, and with a 580w heater, can heat a space that’s approximately 9-10m2. With a depth of just 22mm, you can easily install this flush to your wall, or ceiling if you prefer.
With a superior FIR Coated surface, the panel looks and feels great. It can reach temperatures of around 75-95˚C, which is around the same as a conventional radiator. However, because this can be installed on a ceiling, or higher up on the wall, you don’t have to worry about accidentally touching it as often. It has an IP54 rating, which means it is protected against any accidental splashes of water.
Please note that the advised heated areas are for guidance only. For a more accurate heated area that is more relevant to your home, please either use our Calculator located at the top of this page, or speak to one of our Customer Services advisors about your room.
One of the major advantages of infrared heating is its eco-friendliness, and the way its efficiency saves you money. In fact, it can actually save you a massive 60% on your heating bills! The way it does this is by heating the objects in the room, rather than the air around the heater. It fires infrared beams around the room, that bounce off the objects, leaving them warm.
This means that it avoids any convectional currents, which is where the warm air rises, cools, and falls again. Because conventional heaters do this, they can cause cold spots, mould growth, and dust circulation. This makes infrared heating better for your health.
Infrared heating is also very safe, as it uses the same beams as a TV remote control does. The heat it provides is also the same as the sun’s, although it doesn’t produce any harmful UV radiation.
Our infrared panels come with a brand new, highly advanced premium FIR Coating to help maximise the performance of your heater. It’s heat-resistant – meaning it can withstand temperatures up to 200oC without yellowing over time.
Not only that, but it will also help the carbon crystal heating element inside the panel distribute the IR waves better than ever before, thanks to a higher thermal efficiency, resulting in even more warmth in your home.
To top it all off, the coating is also far more secure than ever before, as it is fire resistant, ensuring your family and your home stay safe and warm.
Our NXTGEN heaters conform to Lot20, meaning they’re smart and efficient. With a 39% of a maximum 40% rating, they go above and beyond in their eco-friendliness.
They have automated temperature control, which means the panel will automatically adjust the heat to your specified temperature. They also have a 7-day timer, too, so you can set different timers for weekdays and the weekend.
With adaptive start, your IR panel will automatically switch on before the time you choose, to make sure your room is the right temperature at the right time.
Plus, it has open window detection, so if it detects that the temperature has dropped 1.5˚C in three minutes, then it switches off. For extra information on these brilliant NXT Gen heaters, see our NXT Gen IR Panel manual.
With the fantastic NXTGEN IR panel comes a brilliant remote control, which allows you to control a few different aspects of the heating. It’s simple to operate, and is full of different features.
The electronic thermostat is a lot more precise than a traditional mechanical thermostat, too, so there’s no need to worry about over or under heating the house.
You can easily adjust the temperature of your panel, and set your weekly timers. It also allows you to set the adaptive start controls, too, so you know you’re not being inefficient.
Plus, a massively underrated feature is being able to control your heating without having to walk to your boiler or wall-mounted thermostat. You can also pair the remote to multiple heaters, to control your heating system as a group.
With so many amazing NXTGEN features, it may be hard to work out exactly what it’s doing by just a quick glance.
However, you don’t need to worry, as we are going to make your lives so much easier. With our fantastic little blue LED light, you can just have a quick glance to know the exact status of the heater.
When the panel is on and emitting heat, then the LED will light up. When the panel isn’t heating the room – maybe it’s night time, or the desired temperature has been met, then the light will be off.
It helps you to know when it’s on or off so you know what it’s doing.
With a gorgeous slimline profile, this heater can look fantastic in a number of places. This is because it can be installed high on the wall, or even on the ceiling. This is far more flexible, and more attractive than a bulky radiator, or an inefficient portable heater.
However, with these heaters, you can also get them customised – perhaps the best feature. Our printed panels are of very high quality, and you can get one of your treasured photos mounted on your wall, and providing you with heat.
Whether it’s a wedding photo, a holiday snap, or the family dog, your heater can be completely disguised. That’s the discreet heating solution that we provide.
To order your custom printed unit complete with your chosen image is really simple. Once you’ve ordered your panel, just send the image you’d like printed on it to: firstname.lastname@example.org. Make sure you remember to include your name and your order number.
Before sending us any images for print, it would be a good idea to check if the image you’re sending is of a high enough quality. You can find out more about this process by following our image quality guide, in order to ensure that your print turns out as good as possible.
When we’ve received your image, we’ll mock up a proof to show you what the finished product will look like. We won’t get your panel printed until we receive e-mail confirmation that you’re happy with the proof.
You can send us multiple images too, and we can create a collage for you, though this may result in an additional charge. We cannot begin creating any collages until payment for the panel has been processed.
When we’ve received this confirmation, we’ll send your panel off to the printers, which can take up to 7 days, and then it’ll be dispatched to you via a next-day delivery service! This super-quick turnaround is far quicker than any other competitors, and is of top-notch quality.
Our custom heating panels come with a fantastic 2-year warranty, to give you peace of mind about your purchase. This is extendable to 5 years at no extra cost.
We cannot accept any returns or exchanges on this product, however, as it is customised for you specially.
If you’d like to know some more about infrared heating in general, then don’t be afraid to get in touch. Call us on 0116 321 4124, email us at email@example.com, or check out our Facebook and Twitter pages.
Finance is a fantastic way to spread the cost of your purchase. To make it easy we've partnered with Duologi whose smart technology lets you apply for and then complete the loan application quickly and entirely online.
First add the items you wish to purchase to your basket. When you reach checkout select the best finance option for you and choose 'Pay with Duologi'. The quick application form takes no more than a couple of minutes to complete and then you'll receive an instant decision.
Before you apply please note you will only be considered for finance if you:
We offer a range of interest-free and interest bearing finance options to help you spread the cost of your purchase over 3, 6 or 12 months. The value of the loan needs to be over £300, all you need to do is pay a 20% deposit up front.
All panels come with free delivery within 2-3 days, and next day delivery is available for £5.99.
You can return your panel if you are not happy with it within 14 days of receiving it.
To install your panel or bar heater, drill 4 holes into your wall as per the mounting template provided with your heater.
For panels, insert the wall plugs, followed by the screws, and use the cross-hair bolt insertion hole brackets on the back of the panel to mount it in place.
For bar heaters, use the provided screws to mount the brackets onto your wall, and then onto the back of the heater. Use the provided wing nuts to secure the wall brackets and heater brackets together at an angle best suited for your area.
Plug the heater into your mains, or get a qualified electrician to hardwire it for you.
Infrared heaters use up to 60% less energy than electric convection heaters, because they warm up objects rather than the air.
As they have no moving parts, they require zero maintenance.
At just 22mm thick, and best installed at head height, they can save massive amounts of space, allowing you to use your entire floor space.
Our infrared panels are far better looking than conventional radiators, giving your home a more modern look.
Once they have reached the end of their huge 100,000 hour lifespan, they almost fully recyclable, further helping the environment even after they’re no longer fit for use.
|Surface Material||Premium FIR Coating|
|Dimensions (mm)||995mm x 595mm x 22mm|
|IP Rating||IP54 - Protected against splashes of water|
|Warranty||2 Years Upgradable to 5 Years|
|Product Features||Built in Thermostat with Remote Control|
|Requirements||Eco Design Requirements for Electric Local Space Heaters|