Natural IR Heat
Hurry Now! 10% Off All Heaters! Use Code: TAKE10
Get yourself the best of both worlds, and introduce an infrared heater to your home. Not only does it provide powerful heat, whilst retaining high energy-efficiency, but it also looks fantastic. That’s because the 595x1195 Daylight Reflections NXT Gen Infrared Heating Panel 700W also provides a spectacular image on the front.
This infrared heater measures around 595mm by 1195mm in size, with a 700W power output. This can keep an area of around 11-12m2 warm. It has a rather thin 22mm depth, which means it can be installed quite closely to the wall. It comes with an IP54 rating as standard, to protect it from any unintentional splashes of water that you might get in the kitchen or bathroom, for example.
The panel’s surface is made from strong and stable FIR Coating materials, which can reach a maximum temperature of around 75-95˚C. This is approximately the same as an average household radiator, but of course, these can be installed higher up on the wall. This means that they are unlikely to be accidentally touched or brushed against.
Infrared heating is a fantastic way to keep your home warm, thanks to just how environmentally friendly it is. This can be transferred into savings on your heating bills, too, saving you up to a huge 60% on your heating bills. It does this is by heating the objects around it, rather than the air. The infrared beams that it emits bounce off of the objects in the room, leaving them warmed up.
This means that IR heating doesn’t generate any convectional currents. These are where the warmed air rises, cools, and falls again. This means that IR heating won’t cause cold spots, mould growth, or dust circulation, as a standard radiator does. By not doing this, infrared heating is better for your health.
Infrared heating is also completely safe, despite sounding like something from a sci-fi film. It’s the same technology that your TV remote at home uses, so it’s already widespread. It generates the same kind of heat as the sun, yet without any dangerous UV radiation.
Our infrared panels come with a brand new, highly advanced premium FIR Coating to help maximise the performance of your heater. It’s heat-resistant – meaning it can withstand temperatures up to 200oC without yellowing over time.
Not only that, but it will also help the carbon crystal heating element inside the panel distribute the IR waves better than ever before, thanks to a higher thermal efficiency, resulting in even more warmth in your home.
To top it all off, the coating is also far more secure than ever before, as it is fire resistant, ensuring your family and your home stay safe and warm.
Included with every single one of our NXT Gen IR Panels is the superb built-in thermostat and remote control, which means they conform completely to the Lot 20 regulations. With this remote control, you can control every single aspect of your heating straight away. The remote control can be paired to multiple heaters, in case you wish to control your heating as a group. This is if you have multiple heaters in a room, or wish to control certain rooms’ heating at the same time.
Our NXT Gen IR Panel manual details the functionality extensively, so have a look at how revolutionary these heaters can be! The remote control is covered by a comprehensive one-year warranty.
You get automated temperature control with this panel, which means you can set your desired temperature, and the heater will automatically switch on and off in order to keep to this temperature. You also get a 7-day timer, too, which means you can customise the on and off times for both weekends and weekdays.
Continuing with the panel’s intelligence, you get an adaptive start feature. This means that when you want it to be 20˚C at 9am, for example, then it will come on earlier, and make sure that your room is the right temperature at the right time. The open window detection means that if your room has a sudden drop in temperature, the heater switches off, as this would be very inefficient.
These panels are extremely easy to install, so you won’t have to concern yourself with acquiring any expert help. Forget about the plumbers, electricians, and carpenters of the world, as they’re just not needed. This is a completely do it yourself job. Simply use the provided stencil to show you where to drill the holes in the wall, then put the screws in. After that, just hang the panel onto the screws, using the two sturdy brackets on the rear.
The panel is totally plug-and-play compatible, thanks to the two-metre long power cable and UK mains 3-pin plug. It can also be suspended from the ceiling, or made to be portable, using the infrared heater stand.
We also have other fantastic images, such as the 595x1195 Coastal Beauty NXT Gen Infrared Heating Panel 700W. This shows a calm sea as it approaches the beach, with grassy cliffs to the foreground and background of the picture.
The next image recommendation is the striking 595x1195 Mountain Sunset NXT Gen Infrared Heating Panel 700W. It is rather orange in hue, thanks to the glorious sunset that illuminates the mountain range.
We provide our image panels with comprehensive 2-year warranties, to protect your purchase and give you complete peace of mind. For additional cover, you can upgrade this to 5 years for free.
We also give you a 14-day home trial period, in case you wish to return or exchange the product. This is susceptible to a small 15% restocking fee, as the picture of course needs to be printed.
All panels come with free delivery within 2-3 days, and next day delivery is available for £5.99.
You can return your panel if you are not happy with it within 14 days of receiving it.
To install your panel or bar heater, drill 4 holes into your wall as per the mounting template provided with your heater.
For panels, insert the wall plugs, followed by the screws, and use the cross-hair bolt insertion hole brackets on the back of the panel to mount it in place.
For bar heaters, use the provided screws to mount the brackets onto your wall, and then onto the back of the heater. Use the provided wing nuts to secure the wall brackets and heater brackets together at an angle best suited for your area.
Plug the heater into your mains, or get a qualified electrician to hardwire it for you.
Infrared heaters use up to 60% less energy than electric convection heaters, because they warm up objects rather than the air.
As they have no moving parts, they require zero maintenance.
At just 22mm thick, and best installed at head height, they can save massive amounts of space, allowing you to use your entire floor space.
Our infrared panels are far better looking than conventional radiators, giving your home a more modern look.
Once they have reached the end of their huge 100,000 hour lifespan, they almost fully recyclable, further helping the environment even after they’re no longer fit for use.
|Surface Material||Premium FIR Coating|
|Dimensions (mm)||595mm x 1195mm x 22mm|
|IP Rating||IP54 - Protected against splashes of water|
|Warranty||2 Years Upgradable to 5 Years|
|Product Features||Built in Thermostat with Remote Control|
|Requirements||Eco Design Requirements for Electric Local Space Heaters|