Update your heating system today, and join the infrared heater revolution. Whether you wish to cut your heating bills or your impact on the environment, an infrared heater has loads of advantages over central heating and other standard heating methods.
This infrared heater measures roughly 595mm by 1195mm, with a 700W power usage. This can warm an area of around 11-12m2. It measures just 22mm in depth, meaning it can be installed very closely against the wall. It comes with an IP54 rating, to guard it against splashes of water.
The panel is built from strong yet elegant FIR Coating, which can attain a surface temperature high of around 75-95˚C. This is the same as a standard radiator, but of course, these can be installed higher up on the wall. This means that they are a lot less likely to be accidentally touched.
It’s a groundbreaking way of heating your home that easily surpasses current heating methods effortlessly. It works in a very different way to your usual heating methods, saving you lots of money and energy in the process. Actually, it’s so eco-friendly, it can actually save you around 60% on your heating bills. It works by dispersing infrared waves around the room, which reflect off of the surfaces and objects in the room.
This contrasts with how standard heaters work, as they warm the air around them. This in turn causes warm-air currents, where the air rises, cools, and falls again, requiring reheating. This is both uneconomical, and bad for your respiratory health. That’s because they promote dust circulation, cold spots, and mould growth. These aggravate health problems, making infrared heating better for your health.
Infrared heating is 100% safe, despite the idea of radiation sounding pretty unsafe. Infrared technology is used in innocuous gadgets such as your TV remote, and has been completely safety-checked.
Our infrared panels come with a brand new, highly advanced premium FIR Coating to help maximise the performance of your heater. It’s heat-resistant – meaning it can withstand temperatures up to 200oC without yellowing over time.
Not only that, but it will also help the carbon crystal heating element inside the panel distribute the IR waves better than ever before, thanks to a higher thermal efficiency, resulting in even more warmth in your home.
To top it all off, the coating is also far more secure than ever before, as it is fire resistant, ensuring your family and your home stay safe and warm.
When you purchase any of our NXT Gen IR Panels, you’ll benefit from the added convenience of the integrated thermostat and remote control bundled with every heater. This is to ensure 100% compliance with the Lot 20 legislation that came into effect at the beginning of 2018. You can pair the remote with multiple heaters, to control them as a group.
The 7-day timer gives you control by letting you set on/off times for the weekdays and weekends.
Our NXT Gen IR Heater manual tells you everything you need to know about the functionality of the range. Please bear in mind that the remote control comes with a 1 year manufacturer’s warranty, giving you peace of mind in the longer term.
This means you benefit from all sorts of new features, starting with automated temperature control. You simply set your temperature and the panel will maintain the warmth by switching on and off.
Where the panel automates things for you is with adaptive start. The panel works out how early it needs to switch on in order for your room to be at your desired temperature at the time you need it. This means you don’t need to guess – it does all the hard work for you!
Open window detection automatically shuts the heater off when there is a sudden drop in temperature, as attempting to heat a room with a cold draft is highly inefficient.
IR panel heaters are extremely easy to install on your wall. You don’t need any previous DIY knowledge at all, as it’s such a quick task for you. You do not need any professional help; you shouldn’t need any help whatsoever. It’s a one-person job, and we give you a stencil with every IR heater to make the task much more straightforward.
Just drill the holes into the wall, as the template shows you, and put the screws into the holes. Once you’ve done that, just mount the panels onto the wall using the brackets on the rear. They are fully plug-and-play compatible, and we provide them with a two metre long power cable, and a UK mains 3-pin plug.
Our first recommendation goes to the rather impressive-looking 595x1195 Bayou Cruise NXT Gen Infrared Heating Panel 700W. It depicts a speedboat racing across a lake, with an enrapturing red sky above.
The second suggestion is the 595x1195 Welsh Valley NXT Gen Infrared Heating Panel 700W, with its British beauty. A bright blue sky, with just a few fluffy white clouds is visible in the gap of this valley, with green grass on both sides.
We provide a superb 2-year warranty with every one of our image panels, in the unlikely event that something goes wrong. You can upgrade this to 5 years at no extra cost. We also provide a 14-day home trial period, in case you wish to return or exchange the item. This is subject to a small 15% restocking fee, as the panel would of course need to be printed on.
Speak to someone from our super-helpful customer services team if you have any questions or issues. Call us on 0116 321 4124, email us at firstname.lastname@example.org, or visit us on our Facebook, Instagram, or Twitter.
All panels come with free delivery within 2-3 days, and next day delivery is available for £5.99.
You can return your panel if you are not happy with it within 14 days of receiving it.
To install your panel or bar heater, drill 4 holes into your wall as per the mounting template provided with your heater.
For panels, insert the wall plugs, followed by the screws, and use the cross-hair bolt insertion hole brackets on the back of the panel to mount it in place.
For bar heaters, use the provided screws to mount the brackets onto your wall, and then onto the back of the heater. Use the provided wing nuts to secure the wall brackets and heater brackets together at an angle best suited for your area.
Plug the heater into your mains, or get a qualified electrician to hardwire it for you.
Infrared heaters use up to 60% less energy than electric convection heaters, because they warm up objects rather than the air.
As they have no moving parts, they require zero maintenance.
At just 22mm thick, and best installed at head height, they can save massive amounts of space, allowing you to use your entire floor space.
Our infrared panels are far better looking than conventional radiators, giving your home a more modern look.
Once they have reached the end of their huge 100,000 hour lifespan, they almost fully recyclable, further helping the environment even after they’re no longer fit for use.
|Surface Material||Premium FIR Coating|
|Dimensions (mm)||595mm x 1195mm x 22mm|
|IP Rating||IP54 - Protected against splashes of water|
|Warranty||2 Years Upgradable to 5 Years|
|Product Features||Built in Thermostat with Remote Control|
|Requirements||Eco Design Requirements for Electric Local Space Heaters|