A classic piece of Japanese artwork is given the Surya Heating treatment here, resulting in the stunning 595x1195 Fine Wind Clear Morning NXT Gen Infrared Heating Panel 700W. Infrared heating has loads of advantages over different heating methods, including central heating.
The infrared heater measures around 595mm by 1195mm, and uses 700 watts. This means it can heat a space that’s around 11-12m2. It measures 22mm in depth, meaning it can be fitted flush against your wall. It comes with an IP54 rating, so it’s protected against any accidental splashes of water.
The panel’s surface is manufactured using FIR Coating, which is attractive and strong. It can reach a maximum surface temperature of roughly 75-95˚C, which is slightly warmer than a standard radiator. This wouldn’t be a problem, however, as it can be installed a lot higher up your wall than other heaters can be.
Infrared heating is a fantastic new way of warming your home that doesn’t depend on the antiquated practices that your normal heaters do. Rather than heating the surrounding air, infrared heaters use infrared rays to warm the surfaces located in the room. This is a great deal more efficient, using less energy, and being able to save you around 60% on your heating bills!
A normal heater causes warm-air currents, where the warm air rises to the ceiling, cools down, and falls again. This causes dust circulation, mould growth, and cold spots, all of which damage your health. IR heating doesn’t do this, and therefore infrared heaters are kinder for your overall health.
Infrared heating is completely safe, too. It sounds a little off-putting, but it’s just the same technology that a TV remote uses! The sun uses infrared rays to warm the earth, too, but an infrared heater doesn’t produce any dangerous UV radiation.
Our infrared panels come with a brand new, highly advanced premium FIR Coating to help maximise the performance of your heater. It’s heat-resistant – meaning it can withstand temperatures up to 200oC without yellowing over time.
Not only that, but it will also help the carbon crystal heating element inside the panel distribute the IR waves better than ever before, thanks to a higher thermal efficiency, resulting in even more warmth in your home.
To top it all off, the coating is also far more secure than ever before, as it is fire resistant, ensuring your family and your home stay safe and warm.
When you purchase any of our NXT Gen IR Panels, you’ll benefit from the added convenience of the integrated thermostat and remote control bundled with every heater. This is to ensure 100% compliance with the Lot 20 legislation that came into effect at the beginning of 2018. You can pair the remote with multiple heaters, to control them as a group.
The 7-day timer gives you control by letting you set on/off times for the weekdays and weekends.
Our NXT Gen IR Heater manual tells you everything you need to know about the functionality of the range. Please bear in mind that the remote control comes with a 1-year manufacturer’s warranty, giving you peace of mind in the longer term.
This means you benefit from all sorts of new features, starting with automated temperature control. You simply set your temperature and the panel will maintain the warmth by switching on and off.
Where the panel automates things for you is with adaptive start. The panel works out how early it needs to switch on in order for your room to be at your desired temperature at the time you need it. This means you don’t need to guess – it does all the hard work for you!
Open window detection automatically shuts the heater off when there is a sudden drop in temperature, as attempting to heat a room with a cold draft is highly inefficient.
These panels are extremely easy to install, so have no worries. It’s a completely one-person job, with no extra help needed at all. This means no plumbers, carpenters or electricians! We provide you with a very useful template that shows you exactly where the holes need to be made in the wall. After the drilling, simply put the screws in the wall, and hang the panel up using the two rear-mounted brackets.
The heaters are completely plug and play compatible, with a UK mains 3-pin plug and a 3m power cable. The panel can also be suspended from the ceiling, or made to be portable when using an infrared heater stand.
Our lovely suggestion is the stunning 595x1195 Dreamy Lake NXT Gen Infrared Heating Panel 700W. It features a lake with some trees, which doesn’t sound all too interesting. However, the gorgeous lilac and orange sky is perfectly reflected in the water, giving the image a surreal look.
We provide a 2-year warranty with every one of our infrared heaters, in order to protect our item, and give you complete peace of mind. This can be extended to 5 years at no extra charge.
We also give you a brilliant 14-day home trial period, in case you wish to return or exchange your item. This is subject to a 15% restocking fee, as the panel of course needs to be printed on.
If you need any advice from any of us, then make sure you get in touch. Give us a call on 0116 321 4124, send us an email to firstname.lastname@example.org, or take a peek at our Facebook, Instagram, or Twitter accounts.
All panels come with free delivery within 2-3 days, and next day delivery is available for £5.99.
You can return your panel if you are not happy with it within 14 days of receiving it.
To install your panel or bar heater, drill 4 holes into your wall as per the mounting template provided with your heater.
For panels, insert the wall plugs, followed by the screws, and use the cross-hair bolt insertion hole brackets on the back of the panel to mount it in place.
For bar heaters, use the provided screws to mount the brackets onto your wall, and then onto the back of the heater. Use the provided wing nuts to secure the wall brackets and heater brackets together at an angle best suited for your area.
Plug the heater into your mains, or get a qualified electrician to hardwire it for you.
Infrared heaters use up to 60% less energy than electric convection heaters, because they warm up objects rather than the air.
As they have no moving parts, they require zero maintenance.
At just 22mm thick, and best installed at head height, they can save massive amounts of space, allowing you to use your entire floor space.
Our infrared panels are far better looking than conventional radiators, giving your home a more modern look.
Once they have reached the end of their huge 100,000 hour lifespan, they almost fully recyclable, further helping the environment even after they’re no longer fit for use.
|Surface Material||Premium FIR Coating|
|Dimensions (mm)||595mm x 1195mm x 22mm|
|IP Rating||IP54 - Protected against splashes of water|
|Warranty||2 Years Upgradable to 5 Years|
|Product Features||Built in Thermostat with Remote Control|
|Requirements||Eco Design Requirements for Electric Local Space Heaters|