Natural IR Heat
Hurry Now! 10% Off All Heaters! Use Code: SUPER10
You won’t find heating as good as this for a Pharaoh price. The burial place of an Egyptian King is displayed proudly on your wall as a fantastic infrared heating panel. IR heating has many different advantages when compared to other methods of heating, like central heating.
This infrared heater measures approximately 595mm by 1195mm, with 700W of power output. This means it can warm an area of around 11-12m2. It measures only a slender 22mm in depth, meaning it can be fitted extremely neatly against the wall. This can save you valuable personal space.
The panel is made from tough yet stylish FIR Coating materials, which help the picture to look fantastic. It can reach a surface temperature of approx. 75-95˚C, which is similar to a normal radiator, but of course, these can be installed much further up on the wall. This means that they are much less likely to be accidentally touched. It comes with an IP54 rating, to protect it against any accidental splashes of liquid.
Infrared heating is exceptionally eco-friendly, using a lot less energy than other heating methods do, including central heating. Infrared heating can actually save you approximately 60% on your heating bills! The way it does this is by warming the actual objects in the room, rather than only the air around them. They use infrared beams that are released around the room, bouncing off the objects, and leaving them warmed.
Therefore, infrared heating doesn’t cause any convectional currents. This is where the warmed air rises, cools, and falls again, before being reheated and repeated. This might not sound too bad, but it causes mould growth, dust circulation, and cold spots, all of which are bad for your overall health. As infrared heating doesn’t do this, it can be seen as better for your health.
Infrared heating is very safe, despite it potentially sounding dangerous. It’s the same kind of heat as that that the sun generates, but without the nasty UV radiation. They use the same technology as your TV remote control, just on a greater scale.
Our infrared panels come with a brand new, highly advanced premium FIR Coating to help maximise the performance of your heater. It’s heat-resistant – meaning it can withstand temperatures up to 200oC without yellowing over time.
Not only that, but it will also help the carbon crystal heating element inside the panel distribute the IR waves better than ever before, thanks to a higher thermal efficiency, resulting in even more warmth in your home.
To top it all off, the coating is also far more secure than ever before, as it is fire resistant, ensuring your family and your home stay safe and warm.
Every one of our NXT Gen IR panels now comes with a built-in thermostat and remote control, meaning that they all conform to the Lot 20 regulations. This means that you can have total automated control of your panels once you get them, with no hidden additional extras! The remote control can actually be paired to multiple heaters, so that you can control them as a group.
The seven-day timer means you can customise your heating times across a wide spectrum of all week. Our NXT Gen IR Panel manual has full details of all the different features’ functionality, so take a look at the future of heating today!
The included remote comes with a comprehensive one-year warranty.
The real headline features are the adaptive start and open window detection. With adaptive start enabled, your IR heater will work out how long it’ll take to warm your room up to the desired temperature, then automatically switch on to ensure that your room warms up at the right time. This is perfect for those frosty mornings!
The amazing automated temperature control means that your panel will do the hard work for you. Just set the desired temperature and this heater will switch on and off automatically in order to regulate your room temperature. Open window detection means that if your panel detects a sudden drop in temperature – around 1.5˚C in 3 minutes – it will switch off, as attempting to continue heating is extremely inefficient.
These infrared panels are extremely slim, and so fit quite neatly against your wall. They can be installed higher up on your wall than an awkward radiator, as you don’t need to worry about the warm air rising to the ceiling. This means it can be a feature of your home, rather than an ugly requirement.
And it definitely isn’t ugly, thanks to the lovely picture. Just take a look at the gorgeous image of the Giza Pyramids, standing proud in the desert. The sky behind is a gorgeous blend of orange and blue, with light streaming through. It’s the perfect way to disguise your heater as an exquisite picture hanging on the wall. That’s why infrared heating is such a discreet heating solution.
For a similar alternative, albeit without the Giza Pyramids, take a look at the 595x1195 Sand Dunes NXT Gen Infrared Heating Panel 700W. It depicts a clear blue sky, with tall orange sand dunes below it. There are multiple tracks of footprints throughout the landscape.
Our second suggestion goes to one a little closer to home. The 595x1195 Forest Waterfall NXT Gen Infrared Heating Panel 700W depicts a waterfall in the centre of a forest. It looks surprisingly peaceful, with slightly muted colours.
Every single one of our image panels come with a fantastic 2-year warranty, so your purchase will be fully protected. This can be upgraded to 5 years at no extra cost.
There’s also an impressive 14-day home trial period, in case you wish to return or exchange it. However, as the image needs to be printed onto the panel, there would be a small 15% restocking fee.
If you have any questions about infrared heating or this particular panel, then don’t be afraid to get in touch with our team. Call us on 0116 321 4124, email us at firstname.lastname@example.org, or check out our Facebook, Instagram and Twitter pages.
All panels come with free delivery within 2-3 days, and next day delivery is available for £5.99.
You can return your panel if you are not happy with it within 14 days of receiving it.
To install your panel or bar heater, drill 4 holes into your wall as per the mounting template provided with your heater.
For panels, insert the wall plugs, followed by the screws, and use the cross-hair bolt insertion hole brackets on the back of the panel to mount it in place.
For bar heaters, use the provided screws to mount the brackets onto your wall, and then onto the back of the heater. Use the provided wing nuts to secure the wall brackets and heater brackets together at an angle best suited for your area.
Plug the heater into your mains, or get a qualified electrician to hardwire it for you.
Infrared heaters use up to 60% less energy than electric convection heaters, because they warm up objects rather than the air.
As they have no moving parts, they require zero maintenance.
At just 22mm thick, and best installed at head height, they can save massive amounts of space, allowing you to use your entire floor space.
Our infrared panels are far better looking than conventional radiators, giving your home a more modern look.
Once they have reached the end of their huge 100,000 hour lifespan, they almost fully recyclable, further helping the environment even after they’re no longer fit for use.
|Surface Material||Premium FIR Coating|
|Dimensions (mm)||595mm x 1195mm x 22mm|
|IP Rating||IP54 - Protected against splashes of water|
|Warranty||2 Years Upgradable to 5 Years|
|Product Features||Built in Thermostat with Remote Control|
|Requirements||Eco Design Requirements for Electric Local Space Heaters|