Housed in the J. Paul Getty Museum in California, Irises by Vincent Van Gogh is an oil painting created in 1889. If you look closely enough, you can see that each one of the Irises depicted are unique and have their own shape and colours.
The 595x1195 Irises NXT Gen Infrared Heating Panel 700W from Mirrorstone is 595mm x 1195mm x 22mm in size and has a surface temperature of 75 - 95°C. Made of solid FIR Coating, it has an IP rating of 54 to ensure it is splash-proof.
With it’s 700 watts powered by 230 volts, our heaters are great to mount onto a wall. This allows a heated surface area of 11 – 12m².
We understand that Infrared is a newer technology and this may be intimidating to some customers. But we are here to provide with any information you need.
Currently, most heating is supplied by gas or electric convection filling up with hot water. This will then make the air around the heater hot and rise to the ceiling. Once cooled, this air will begin to sink to the ground and this entire process creates a circulation of air – or a convection current.
Infrared heating, on the other hand, radiate electromagnetic waves that are the same as that of the Sun. Completely safe and 100% natural, these waves bounce around the room and target objects and people. Once hit, the object will absorb some heat and then emit that heat back out.
The key difference between the two is that IR heating work by heating objects themselves and not by heating the air. This is far more efficient as it takes more energy to heat a large volume of space.
Our infrared panels come with a brand new, highly advanced premium FIR Coating to help maximise the performance of your heater. It’s heat-resistant – meaning it can withstand temperatures up to 200oC without yellowing over time.
Not only that, but it will also help the carbon crystal heating element inside the panel distribute the IR waves better than ever before, thanks to a higher thermal efficiency, resulting in even more warmth in your home.
To top it all off, the coating is also far more secure than ever before, as it is fire resistant, ensuring your family and your home stay safe and warm.
Due to the introduction of LOT20, a governed requirement for all heaters, our panels have been upgraded with a built-in thermostat and remote to work alongside new features.
With increased efficiency, our panels switch on and off to stabilise one consistent temperature that you have set, thanks to the Automated Temperature Control. The 7-Day Timer allows you to select specific times and temperatures for weekdays and weekends.
The more intelligent qualities include Adaptive Start, which wakes the panel up early to slowly work up to your selected temperature to be ready for a certain time. Open Window Detection will automatically turn a panel off when temperature drop is detected within 3 minutes.
The maximum compliancy possible for LOT20 is 40%, and our panels are all a staggering 39%.
Taking full control of your heating is a great way to ensure you are being as eco-friendly and saving enough money as you possibly can. Use a remote or an external thermostat to regulate the temperature, features and output.
Use a plug-in thermostat, like the Electronic Plug-in Thermostat with 24 Hour Control, for discreet but simple temperature control. Or if you are installing the panel into an area that isn’t suited open electrics, you will need to use an external thermostat.
However, may customers opt to use the included remote control. Simply requiring 2 x AAA batteries and being easy to use, the screen and buttons are all self-explanatory. It gives you complete control to play with the NXT features and can be powered from a short distance.
Many customers opt to mount the panels, like a picture, which is completely safe and unlikely to fall as it is held up by steel screws and sturdy brackets. This will keep you relaxed as it cannot ever cause any subsequent injury to you or your loved ones.
Our IR Panels are not weak or fragile. They are made of FIR Coating and aluminium, best known for the material of cans, which has many benefits itself. It is a lightweight metal, tremendously resistant to corrosion and has excellent reflectivity of heat to assist our ways of IR.
We are happy to announce that all of our panels are environmentally friendly and recyclable all due to the use of aluminium.
If you are looking for more image panels for your space, take a look at more of our Image IR Panels. Here are some we have hand-picked for you…
Get all the vibes of the carnival and bold beauty of Rio with the 595x1195 Rio NXT Gen Infrared Heating Panel 700W. With a stunning view of the coast, this panel is imprinted with a fresh and sunny snap of the city.
Dress your room with the 595x1195 Milky Way NXT Gen Infrared Heating Panel 700W. This 600mm x 1200mm radiator is like laying under the stars as the multi-coloured skies glisten.
We offer discounts and promotions to save you money on your orders and there is also no delivery cost what-so-ever. You are also offered a stress-free 2-year warranty. This is also upgradable to 5 years at no extra cost.
If you happen to be a trader, please sign up for a trade account today to be privy to up to 25% off your orders, an account manager and many more exclusive treats.
If you are not happy with your panel, you can send it back to us within your 14-day home trial period for a refund. As this is a special order item, a 15% restocking fee will be applied.
To get in touch with our team for any help or advice needed, please give us a call on 0116 321 4124 or email us on firstname.lastname@example.org. You can also keep up with us via Facebook, Instagram and Twitter or subscribe to our YouTube channel.
All panels come with free delivery within 2-3 days, and next day delivery is available for £5.99.
You can return your panel if you are not happy with it within 14 days of receiving it.
To install your panel or bar heater, drill 4 holes into your wall as per the mounting template provided with your heater.
For panels, insert the wall plugs, followed by the screws, and use the cross-hair bolt insertion hole brackets on the back of the panel to mount it in place.
For bar heaters, use the provided screws to mount the brackets onto your wall, and then onto the back of the heater. Use the provided wing nuts to secure the wall brackets and heater brackets together at an angle best suited for your area.
Plug the heater into your mains, or get a qualified electrician to hardwire it for you.
Infrared heaters use up to 60% less energy than electric convection heaters, because they warm up objects rather than the air.
As they have no moving parts, they require zero maintenance.
At just 22mm thick, and best installed at head height, they can save massive amounts of space, allowing you to use your entire floor space.
Our infrared panels are far better looking than conventional radiators, giving your home a more modern look.
Once they have reached the end of their huge 100,000 hour lifespan, they almost fully recyclable, further helping the environment even after they’re no longer fit for use.
|Surface Material||Premium FIR Coating|
|Dimensions (mm)||595mm x 1195mm x 22mm|
|IP Rating||IP54 - Protected against splashes of water|
|Warranty||2 Years Upgradable to 5 Years|
|Product Features||Built in Thermostat with Remote Control|
|Requirements||Eco Design Requirements for Electric Local Space Heaters|