The gorgeous 595x1195 Mountain Sunset NXT Gen Infrared Heating Panel 700w brings the warm glow of the stunning sunset along with the warm feeling of the infrared heating. IR heating has a tonne of different advantages when compared to other methods of heating.
The panel measures roughly 595mm by 1195mm, and has a power output of 700W. This means it can heat an area that’s around 11-12m2. It measures approximately 22mm in depth, meaning it can fit very neatly against the wall. It comes with an IP54 rating, so it’s protected against accidental splashes of water.
The panel’s surface is manufactured using FIR Coating, which is attractive and strong. It can reach a maximum surface temperature of roughly 75-95˚C, which is slightly warmer than a normal radiator. This wouldn’t be an issue, however, as it can be installed much higher up your wall than other types of heater can be.
It’s a revolutionary new way to keep your home warm that has a plethora of different benefits for you. It’s super-efficient, using a tiny amount of energy compared to other heating methods. It can actually save you an impressive 60% on your heating bills! It does this by heating your room in a completely different way. Rather than heating the air surrounding it, it fires infrared beams around the room. These bounce off of the objects in the room, leaving them warmed.
This means that infrared heating doesn’t cause any inefficient convectional currents. This is where the warmed air rises to the ceiling, where it cools, and falls again, needing more heat. This means that infrared heating doesn’t result in any cold spots, mould growth or dust circulation, as a standard radiator does. This makes infrared heating better for your health, too.
Infrared heating is completely harmless, as scary as it sounds. It’s just the same type of beams that your TV remote emits! In fact, it’s the same kind of heat that the sun provides, too.
Our infrared panels come with a brand new, highly advanced premium FIR Coating to help maximise the performance of your heater. It’s heat-resistant – meaning it can withstand temperatures up to 200oC without yellowing over time.
Not only that, but it will also help the carbon crystal heating element inside the panel distribute the IR waves better than ever before, thanks to a higher thermal efficiency, resulting in even more warmth in your home.
To top it all off, the coating is also far more secure than ever before, as it is fire resistant, ensuring your family and your home stay safe and warm.
Every single NXT Gen IR panel now come with a built-in thermostat, meaning they are compliant with the Lot 20 legislation that was introduced at the start of 2018. Along with the bundled remote control, you can fully control your heating straight away, and even allow some aspects to be automated. It can be paired with multiple heaters, in order to control your heaters as a group.
The 7-day timer means you can customise when your heating is on or off on both weekdays and weekends. Take a look through our NXT Gen IR Panel manual for more information on how these panels will revolutionise your home’s heating.
The remote control comes with a comprehensive one-year warranty, for your peace of mind.
You have lots of excellent features to control, with a NXTGEN heater. With the excellent automatic temperature control, you can regulate your room’s temperature with ease. The panel will automatically turn on and off in order to keep your room at your intended temperature.
That’s not all, though – the NXT Gen panels come with two more show-stopping features. The adaptive start function means that your panel can calculate how much earlier it needs to switch on, in order for your room to reach the intended temperature at the desired time. The open window detection feature switches your heater off if there’s a sudden temperature drop, as it’s uneconomical to run a heater in those conditions.
These infrared panels are extremely straightforward to install, with simple instructions to adhere to that show you precisely what you have to do. As the heaters are plug-and-play compatible, you won’t have any problems. Realistically, you can just take them out of the box and plug them straight in to the power outlet. To fit them onto your wall, use the template that’s supplied with every heater. This shows you exactly where to drill the holes.
Slot the screws into the wall, and then hang the panel onto the wall, using the two brackets on the back. It’s a quick task for you, with no extra help required. The panels can also be suspended from the ceiling, or made to be portable, using an infrared heater stand.
A suggestion is one of a stunning natural scene. The 595x1195 Mountain Tops NXT Gen Infrared Heating Panel 700W features some snowy mountain peaks, with a vibrant blue sky behind them. Towards the foreground of the image is a rich green forest.
All of our different image panels come with an impressive 2-year warranty, so your purchase will be completely protected. This can be upgraded to 5 years for free.
There’s also an incredible 14-day home trial period, in case you feel the need to return or exchange it. This is susceptible to a small 15% restocking fee, however, as the panel would need to be printed on.
All panels come with free delivery within 2-3 days, and next day delivery is available for £5.99.
You can return your panel if you are not happy with it within 14 days of receiving it.
To install your panel or bar heater, drill 4 holes into your wall as per the mounting template provided with your heater.
For panels, insert the wall plugs, followed by the screws, and use the cross-hair bolt insertion hole brackets on the back of the panel to mount it in place.
For bar heaters, use the provided screws to mount the brackets onto your wall, and then onto the back of the heater. Use the provided wing nuts to secure the wall brackets and heater brackets together at an angle best suited for your area.
Plug the heater into your mains, or get a qualified electrician to hardwire it for you.
Infrared heaters use up to 60% less energy than electric convection heaters, because they warm up objects rather than the air.
As they have no moving parts, they require zero maintenance.
At just 22mm thick, and best installed at head height, they can save massive amounts of space, allowing you to use your entire floor space.
Our infrared panels are far better looking than conventional radiators, giving your home a more modern look.
Once they have reached the end of their huge 100,000 hour lifespan, they almost fully recyclable, further helping the environment even after they’re no longer fit for use.
|Surface Material||Premium FIR Coating|
|Dimensions (mm)||595mm x 1195mm x 22mm|
|IP Rating||IP54 - Protected against splashes of water|
|Warranty||2 Years Upgradable to 5 Years|
|Product Features||Built in Thermostat with Remote Control|
|Requirements||Eco Design Requirements for Electric Local Space Heaters|