Natural IR Heat
Hurry Now! 10% Off All Heaters! Use Code: SUPER10
For a heater that’s truly impressive, check out the 595x1195 Natural Spring NXT Gen Infrared Heating Panel 700W. It’s a gorgeous image on an infrared heater, which can outperform loads of different heater types, including central heating.
The panel measures approximately 595mm by 1195mm, with a power output of 700W. This means it can heat an area that’s approximately 11-12m2. It measures just 22mm in depth, meaning it can be installed extremely closely to the wall.
The panel is made from tough yet attractive FIR Coating materials, which can reach a surface temperature of around 75-95˚C. This is the same as a standard radiator, but of course, these can be installed higher up on the wall. This means that they are unlikely to be accidentally touched. It comes with an IP54 rating, to protect it against splashes of water.
Infrared heating is particularly eco-friendly, and it saves you quite a lot of money on your heating bills. In fact, infrared heating can actually save you up to 60% on your heating bills every time! Infrared heating works by scattering infrared beams around your room, which bounce off the objects, leaving them warmed. This is far more efficient than convectional heaters, as they just warm the air, which rises to the ceiling.
Traditional heaters only warm the air around them, which causes convectional currents. This forces them to work harder, as the hot air cools, and falls again. This is how infrared heating benefits your health, as it means the air is less stuffy, and there’s no dust circulation.
IR heating is completely harmless for you. It uses the same waves as your TV remote does, although on a greater scale. The sun also uses infrared beams to heat us, although IR heaters don’t provide any nasty UV radiation as the sun does.
Our infrared panels come with a brand new, highly advanced premium FIR Coating to help maximise the performance of your heater. It’s heat-resistant – meaning it can withstand temperatures up to 200oC without yellowing over time.
Not only that, but it will also help the carbon crystal heating element inside the panel distribute the IR waves better than ever before, thanks to a higher thermal efficiency, resulting in even more warmth in your home.
To top it all off, the coating is also far more secure than ever before, as it is fire resistant, ensuring your family and your home stay safe and warm.
Every one of our NXT Gen IR panels now comes with a built-in thermostat and remote control, meaning that they all conform to the Lot 20 regulations. This means that you can have total automated control of your panels once you get them, with no hidden additional extras! The remote control can actually be paired to multiple heaters, so that you can control them as a group.
The seven-day timer means you can customise your heating times across a wide spectrum of all week. Our NXT Gen IR Panel manual has full details of all the different features’ functionality, so take a look at the future of heating today!
The included remote comes with a comprehensive one-year warranty.
The real headline features are the adaptive start and open window detection. With adaptive start enabled, your IR heater will work out how long it’ll take to warm your room up to the desired temperature, then automatically switch on to ensure that your room warms up at the right time. This is perfect for those frosty mornings!
The amazing automated temperature control means that your panel will do the hard work for you. Just set the desired temperature and this heater will switch on and off automatically in order to regulate your room temperature. Open window detection means that if your panel detects a sudden drop in temperature – around 1.5˚C in 3 minutes – it will switch off, as attempting to continue heating is extremely inefficient.
With a very slim depth of just 22mm, you don’t have to worry about this heater extending too far into your room. They can be installed much further up the wall than traditional radiators, which saves you plenty of floor space, and looks far superior. They can even be customised with an image from your personal collection.
This panel features an extremely premium-looking image on it. The Natural Spring displays some of Britain’s natural glory. With a lake surrounded by rock formations on all sides, this peaceful image is perfect for your home. Disguising your heater as a picture on the wall is a super modern way to improve your interior design.
We also have other spectacular pictures available, such as the 595x1195 Coastal Beauty NXT Gen Infrared Heating Panel 700W. This shows a somewhat peaceful sea as it approaches the beach, with green rock faces to either side of the inlet.
An icier suggestion goes to the tranquil, cold-looking 595x1195 Winter Drive NXT Gen Infrared Heating Panel 700W. It depicts a frosty road, cutting between two lines of snowy trees, with tyre tracks along it.
We provide a comprehensive 2-year warranty with all of our infrared panel heaters, in case anything goes wrong. You can upgrade this to 5 years for free.
We also supply a 14-day home trial period, in case you wish to return or exchange the item. This is subject to a small 15% restocking fee, however, as it would need to be printed on.
If you need any extra information about our infrared heating, we’ll be happy to help. Give us a call on 0116 321 4124, email us at firstname.lastname@example.org, or visit us on Facebook, Twitter, or Instagram.
All panels come with free delivery within 2-3 days, and next day delivery is available for £5.99.
You can return your panel if you are not happy with it within 14 days of receiving it.
To install your panel or bar heater, drill 4 holes into your wall as per the mounting template provided with your heater.
For panels, insert the wall plugs, followed by the screws, and use the cross-hair bolt insertion hole brackets on the back of the panel to mount it in place.
For bar heaters, use the provided screws to mount the brackets onto your wall, and then onto the back of the heater. Use the provided wing nuts to secure the wall brackets and heater brackets together at an angle best suited for your area.
Plug the heater into your mains, or get a qualified electrician to hardwire it for you.
Infrared heaters use up to 60% less energy than electric convection heaters, because they warm up objects rather than the air.
As they have no moving parts, they require zero maintenance.
At just 22mm thick, and best installed at head height, they can save massive amounts of space, allowing you to use your entire floor space.
Our infrared panels are far better looking than conventional radiators, giving your home a more modern look.
Once they have reached the end of their huge 100,000 hour lifespan, they almost fully recyclable, further helping the environment even after they’re no longer fit for use.
|Surface Material||Premium FIR Coating|
|Dimensions (mm)||595mm x 1195mm x 22mm|
|IP Rating||IP54 - Protected against splashes of water|
|Warranty||2 Years Upgradable to 5 Years|
|Product Features||Built in Thermostat with Remote Control|
|Requirements||Eco Design Requirements for Electric Local Space Heaters|