Combine tranquillity and warmth with the superb 595x1195 Pebbles NXT Gen Infrared Heating Panel 700w. This image panel is absolutely gorgeous, thanks to the peaceful image displayed on the front. Infrared heating is the best way to heat your home, thanks to its advantages over other types of heating.
This heater measures around 595mm by 1195mm, with a 700W power output. This keeps an area of approx. 11-12m2 warm. It measures just a slender 22mm in depth, meaning it can be installed extremely closely to the wall. It is supplied with an IP54 rating, to protect it against any accidental splashes of water that you may get in the kitchen or bathroom, if you wished to place it there.
The surface of the panel is made from tough yet attractive FIR Coating materials, which can reach a maximum temperature of roughly 75-95˚C. This is the same as a standard radiator, but of course, these IR heaters can be installed higher up on the wall. This means that they are unlikely to be unintentionally brushed against when warm.
Infrared heating is incredibly efficient when compared to standard radiators, as it dissipates its heat in an entirely different way. Infrared heating can, fantastically, save you up to 60% on your heating bills! By warming the objects in the room, rather than just the air surrounding the heater, an infrared heater can save you a huge amount of energy. That’s because it creates a thermal mass, which continues to keep the room warm after the heater is switched off.
As traditional heaters warm the air, they can negatively influence your health. Warm air creates a convectional current, where it ascends to the ceiling, cools, and then descends again. This can foster dust circulation, mould and mildew growth, and cold spots. As infrared heating does not do this, it’s seen as better for your overall health and well-being.
Infrared heating is also very safe, as it uses the same technology that a TV remote control does. The heat it delivers is also the same that the sun does, although IR doesn’t produce any nasty UV radiation.
Our infrared panels come with a brand new, highly advanced premium FIR Coating to help maximise the performance of your heater. It’s heat-resistant – meaning it can withstand temperatures up to 200oC without yellowing over time.
Not only that, but it will also help the carbon crystal heating element inside the panel distribute the IR waves better than ever before, thanks to a higher thermal efficiency, resulting in even more warmth in your home.
To top it all off, the coating is also far more secure than ever before, as it is fire resistant, ensuring your family and your home stay safe and warm.
With one of our NXT Gen IR Panels, you will get some incredible functionality. They come with a built-in thermostat and remote control, which means they are all compliant with the new for 2018 Lot 20 legislation. This means that these panels can be automatically controlled straight out of the box! The remote control can be paired with multiple heaters in your home, in case you wish to control them as a group or a zone.
Automated temperature control allows you to set the desired temperature for your room, and let the panel does the work. It turns on and off to make sure that your room stays at the temperature you’re after. The remote control is covered by an extensive one-year manufacturer’s warranty.
It has a 7-day timer, too, that allows you to set different on/off times for weekdays and weekends.
Where the panel truly works its magic is through the adaptive start and open window detection. Adaptive start means that your panel uses its brain to work out when to switch on to make sure that your room is at your desired temperature at your desired time. This means no more random guesswork for you. The open window detection means that if there’s a sudden temperature drop, like when you open a window, the panel will switch off, to save you energy.
Our NXT Gen IR Panel manual has full details of the functionality, and how this heater will genuinely improve your livelihood.
This infrared panel measures just 22mm in depth, which means it can be installed against the wall without it protruding particularly far into your room. Because you can mount them much higher up on the wall than traditional radiators, you can save a lot of space. Just think – you can finally place your cupboard or sofa where the radiator is, without blocking any heat.
The Pebbles is a stunning image. The gorgeous image depicts a small pile of black pebbles, perched on top of each other to form a tower. They’re in the middle of a body of water, with a blurred green forest-like background. It creates an extremely peaceful look. You get a gorgeous aesthetic feature that also replaces a clunky radiator.
The good recommendation is the fantastic 595x1195 Daylight Reflections NXT Gen Infrared Heating Panel 700W. It shows a large hill, with a cloudy sky above, and a lake to the foreground. This lake is reflecting everything above it.
We provide a superb 2-year warranty with every one of our image panels, in the unlikely event that something goes wrong. You can then extend this to 5 years at no extra cost. We also provide a 14-day home trial period, in case you wish to return or exchange the item. This is subject to a small 15% restocking fee, as the panel would of course need to be printed on.
Speak to someone from our friendly customer services team if you have any questions or issues. Call us on 0116 321 4124, email us at email@example.com, or visit us on our Facebook, Instagram, or Twitter.
All panels come with free delivery within 2-3 days, and next day delivery is available for £5.99.
You can return your panel if you are not happy with it within 14 days of receiving it.
To install your panel or bar heater, drill 4 holes into your wall as per the mounting template provided with your heater.
For panels, insert the wall plugs, followed by the screws, and use the cross-hair bolt insertion hole brackets on the back of the panel to mount it in place.
For bar heaters, use the provided screws to mount the brackets onto your wall, and then onto the back of the heater. Use the provided wing nuts to secure the wall brackets and heater brackets together at an angle best suited for your area.
Plug the heater into your mains, or get a qualified electrician to hardwire it for you.
Infrared heaters use up to 60% less energy than electric convection heaters, because they warm up objects rather than the air.
As they have no moving parts, they require zero maintenance.
At just 22mm thick, and best installed at head height, they can save massive amounts of space, allowing you to use your entire floor space.
Our infrared panels are far better looking than conventional radiators, giving your home a more modern look.
Once they have reached the end of their huge 100,000 hour lifespan, they almost fully recyclable, further helping the environment even after they’re no longer fit for use.
|Surface Material||Premium FIR Coating|
|Dimensions (mm)||595mm x 1195mm x 22mm|
|IP Rating||IP54 - Protected against splashes of water|
|Warranty||2 Years Upgradable to 5 Years|
|Product Features||Built in Thermostat with Remote Control|
|Requirements||Eco Design Requirements for Electric Local Space Heaters|