Natural IR Heat
Hurry Now! 10% Off All Heaters! Use Code: BIG10
Take a look at this gorgeous image, and come to the realisation that this is more than a picture. This is the 595x1195 Rolling Valley NXT Gen Infrared Heating Panel 700W, which combines beauty and function into a brilliant heating package. Infrared heating actually has many advantages over standard heating methods.
The panel measures approximately 595mm by 1195mm, with a power output of 700W. This means it can heat an area that’s approximately 11-12m2. It measures just 22mm in depth, meaning it can be installed extremely closely to the wall. It comes with an IP54 rating, to protect it against any mishaps involving splashes of water.
The panel is made from strong yet stylish FIR Coating materials, which can reach a maximum surface temperature of around 75-95˚C. This is the same as a standard radiator, but of course, these can be installed higher up on the wall. This means that they are unlikely to be accidentally touched.
Infrared heating is a pioneering new way of warming your home that doesn’t rely on the outdated practices that your average heaters do. Rather than heating the nearby air, infrared heaters use infrared waves to warm the surfaces around the room. This is a lot more efficient, using loads less energy, and being able to save you around 60% on your heating bills!
A traditional heater causes warm-air currents, where the warmth rises to the ceiling, cools down, and falls again. This promotes dust circulation, mould growth, and cold spots, all of which negatively affect your health. IR heating doesn’t do this, and therefore infrared heaters are better for your health.
Infrared heating is completely safe, too. It sounds a little unfamiliar, but it’s just the same technology that a TV remote uses! The sun uses infrared beams to warm the earth, too, but an infrared heater doesn’t emit any dangerous UV radiation.
Our infrared panels come with a brand new, highly advanced premium FIR Coating to help maximise the performance of your heater. It’s heat-resistant – meaning it can withstand temperatures up to 200oC without yellowing over time.
Not only that, but it will also help the carbon crystal heating element inside the panel distribute the IR waves better than ever before, thanks to a higher thermal efficiency, resulting in even more warmth in your home.
To top it all off, the coating is also far more secure than ever before, as it is fire resistant, ensuring your family and your home stay safe and warm.
When you purchase any of our NXT Gen IR Panels, you’ll benefit from the added convenience of the integrated thermostat and remote control bundled with every heater. This is to ensure 100% compliance with the Lot 20 legislation that came into effect at the beginning of 2018. You can pair the remote with multiple heaters, to control them as a group.
The 7-day timer gives you control by letting you set on/off times for the weekdays and weekends.
Our NXT Gen IR Heater manual tells you everything you need to know about the functionality of the range. Please bear in mind that the remote control comes with a 1 year manufacturer’s warranty, giving you peace of mind in the longer term.
This means you benefit from all sorts of new features, starting with automated temperature control. You simply set your temperature and the panel will maintain the warmth by switching on and off.
Where the panel automates things for you is with adaptive start. The panel works out how early it needs to switch on in order for your room to be at your desired temperature at the time you need it. This means you don’t need to guess – it does all the hard work for you!
Open window detection automatically shuts the heater off when there is a sudden drop in temperature, as attempting to heat a room with a cold draft is highly inefficient.
Thanks to this panel’s thin 22mm depth, you can fit it very close to your wall, so it’s well out of the way. They can be installed high up on the wall, which saves you plenty of space when compared to traditional space heaters. It means that you can have an attractive feature in your room instead.
This image panel has an amazingly high-quality picture on the front. The Rolling Valley depicts a luscious green valley, with a bright blue sky up above. Down below is a rolling fog that is snaking its way between the two hills. It’s a brilliant way to disguise your heater as just a lovely picture on the wall.
The 595x1195 Glacial Brook NXT Gen Infrared Heating Panel 700W is an absolutely stunning suggestion. Less of a valley, and more traditional countryside, this depicts a trickling brook of water winding through a luscious green valley, with a bright blue sky overhead.
A second, much snowier suggestion goes to the gorgeous 595x1195 Ice Caps NXT Gen Infrared Heating Panel 700W. It shows a giant icy landmass, with pure blue skies and sea surrounding it. The sea is calm enough to create a perfect reflection of that above it.
We provide a 2-year warranty with every single one of our infrared heaters, in order to protect our item, and give you complete peace of mind. This can be extended to 5 years at no additional charge.
We also give you a fantastic 14-day home trial period, in case you wish to return or exchange your item. This is subject to a 15% restocking fee, as the panel of course needs to be printed on.
If you need any extra information from any of us, then make sure you get in touch. Give us a call on 0116 321 4124, send us an email to firstname.lastname@example.org, or take a peek at our Facebook, Instagram, or Twitter accounts.
All panels come with free delivery within 2-3 days, and next day delivery is available for £5.99.
You can return your panel if you are not happy with it within 14 days of receiving it.
To install your panel or bar heater, drill 4 holes into your wall as per the mounting template provided with your heater.
For panels, insert the wall plugs, followed by the screws, and use the cross-hair bolt insertion hole brackets on the back of the panel to mount it in place.
For bar heaters, use the provided screws to mount the brackets onto your wall, and then onto the back of the heater. Use the provided wing nuts to secure the wall brackets and heater brackets together at an angle best suited for your area.
Plug the heater into your mains, or get a qualified electrician to hardwire it for you.
Infrared heaters use up to 60% less energy than electric convection heaters, because they warm up objects rather than the air.
As they have no moving parts, they require zero maintenance.
At just 22mm thick, and best installed at head height, they can save massive amounts of space, allowing you to use your entire floor space.
Our infrared panels are far better looking than conventional radiators, giving your home a more modern look.
Once they have reached the end of their huge 100,000 hour lifespan, they almost fully recyclable, further helping the environment even after they’re no longer fit for use.
|Surface Material||Premium FIR Coating|
|Dimensions (mm)||595mm x 1195mm x 22mm|
|IP Rating||IP54 - Protected against splashes of water|
|Warranty||2 Years Upgradable to 5 Years|
|Product Features||Built in Thermostat with Remote Control|
|Requirements||Eco Design Requirements for Electric Local Space Heaters|