Natural IR Heat
Hurry Now! 10% Off All Heaters! Use Code: SUPER10
If you’d like a stunning image for your home, that also functions as a fantastic way to heat your home, take a look at the 595x1195 Stormy Shore NXT Gen Infrared Heating Panel 700W. Infrared heating has loads of advantages over different heating methods, including central heating.
This heating panel measures 595mm by 1195mm, and, with a power output of 700W, can heat an area that’s around 11-12m2 in size. With a slim depth of just 22mm, this could effortlessly fit against your wall with very little extension into the room. It comes with an IP54 rating, which protects it against accidental splashes of water.
The panel is built from fantastic FIR Coating materials, which are built to survive and look fab in doing so. The surface temperature can reach approximately 75-95˚C, which is only slightly hotter than a normal radiator. As infrared heaters can be installed much higher up on the wall, they’re unlikely to be accidentally touched.
It’s a revolutionary new way to keep your home warm, which has an abundance of fantastic benefits for you. It’s super-efficient, using a tiny amount of energy compared to other heating methods. It can actually save you an impressive 60% on your heating bills! It does this by heating your room in a completely different way. Rather than heating the air surrounding it, it fires infrared beams around the room. These bounce off of the objects in the room, leaving them warmed.
This means that infrared heating doesn’t cause any wasteful convectional currents. This is where the warmed air rises to the ceiling, where it cools, and falls again, requiring extra heat. This means that infrared heating doesn’t produce any cold spots, mould growth or dust circulation, as a normal radiator does. This makes infrared heating better for your health, too.
Infrared heating is definitely safe, as scary as it sounds. It’s just the same type of waves that your TV remote emits! In fact, it’s the same kind of heat that the sun generates, too.
Our infrared panels come with a brand new, highly advanced premium FIR Coating to help maximise the performance of your heater. It’s heat-resistant – meaning it can withstand temperatures up to 200oC without yellowing over time.
Not only that, but it will also help the carbon crystal heating element inside the panel distribute the IR waves better than ever before, thanks to a higher thermal efficiency, resulting in even more warmth in your home.
To top it all off, the coating is also far more secure than ever before, as it is fire resistant, ensuring your family and your home stay safe and warm.
With one of our NXT Gen IR Panels, you will get some incredible functionality. They come with a built-in thermostat and remote control, which means they are all compliant with the Lot 20 legislation that was introduced at the start of 2018. This means that these panels can be automatically controlled straight out of the box! The remote can actually be paired with multiple heaters, in order to control them as a group.
It has a 7-day timer, too, that allows you to set different on/off times for weekdays and weekends. Our NXT Gen IR Panel manual has full details of the functionality, and how this heater will genuinely improve your livelihood.
The remote control is covered by an extensive one-year manufacturer’s warranty.
Where the panel truly works its magic is through the adaptive start and open window detection. Adaptive start means that your panel uses its brain to work out when to switch on to make sure that your room is at your desired temperature at your desired time. This means no more random guesswork for you. The open window detection means that if there’s a sudden temperature drop, like when you open a window, the panel will switch off, to save you energy.
Automated temperature control allows you to set the desired temperature for your room, and let the panel does the work. It turns on and off to make sure that your room stays at the temperature you’re after.
These infrared panel heaters can be installed much higher up than a standard heater, as you don’t have to worry about the warm-air currents carrying the heat away from you. This means that your heater can look more like a picture hanging on the wall rather than an ugly radiator taking up valuable floor space.
The Stormy Shore is an incredible image. It depicts craggy rocks in the sea, with a brutal sea attacking them. There’s a white spray surrounding them, and the entire image is rendered in black and white. A stunning image panel is the perfect way to disguise your heating, creating a discreet heating solution that looks great and works well.
For an even colder look to your image, take a look at the unbelievable 595x1195 Frozen Twilight NXT Gen Infrared Heating Panel 700W. It features a row of ice-covered trees, with a striking pink sky above. This gives the trees and snow a lilac radiance.
Our second recommendation goes to the rather majestic-looking 595x1195 Bayou Cruise NXT Gen Infrared Heating Panel 700W. It depicts a speedboat jetting through a lake, with an enchanting red sky above.
We provide a superb 2-year warranty with every one of our image panels, in the unlikely event that something goes wrong, which is extendable to 5 years at no extra charge. We also provide a 14-day home trial period, in case you wish to return or exchange the item. This is subject to a small 15% restocking fee, as the panel would of course need to be printed on.
Have a chat with someone from our friendly customer services team if you have any questions or issues. Call us on 0116 321 4124, email us at email@example.com, or visit us on our Facebook, Instagram, or Twitter.
All panels come with free delivery within 2-3 days, and next day delivery is available for £5.99.
You can return your panel if you are not happy with it within 14 days of receiving it.
To install your panel or bar heater, drill 4 holes into your wall as per the mounting template provided with your heater.
For panels, insert the wall plugs, followed by the screws, and use the cross-hair bolt insertion hole brackets on the back of the panel to mount it in place.
For bar heaters, use the provided screws to mount the brackets onto your wall, and then onto the back of the heater. Use the provided wing nuts to secure the wall brackets and heater brackets together at an angle best suited for your area.
Plug the heater into your mains, or get a qualified electrician to hardwire it for you.
Infrared heaters use up to 60% less energy than electric convection heaters, because they warm up objects rather than the air.
As they have no moving parts, they require zero maintenance.
At just 22mm thick, and best installed at head height, they can save massive amounts of space, allowing you to use your entire floor space.
Our infrared panels are far better looking than conventional radiators, giving your home a more modern look.
Once they have reached the end of their huge 100,000 hour lifespan, they almost fully recyclable, further helping the environment even after they’re no longer fit for use.
|Surface Material||Premium FIR Coating|
|Dimensions (mm)||595mm x 1195mm x 22mm|
|IP Rating||IP54 - Protected against splashes of water|
|Warranty||2 Years Upgradable to 5 Years|
|Product Features||Built in Thermostat with Remote Control|
|Requirements||Eco Design Requirements for Electric Local Space Heaters|