Take your heating to a level beyond our planet with our 595 x 595 Andromeda Printed Infrared Heating Panel 350W from Mirrorstone Heating.
Our closest galactic neighbour, the Andromeda Galaxy, lies motionless, as its trillion stars spiral around the core, taking centuries to get even a fraction of the way around. The sheer scale of the image depicted is perhaps too large for our minds to even comprehend.
What will also amaze you is the 350W of heat emitted from the 595 x 595mm sized aluminium surface, that can reach temperatures of up to 75-95oC.
This is nothing to worry about though, as even normal radiators get very hot when they’re on. The fact that you have the freedom to install them high up on walls and even on ceilings essentially makes this a non-issue, as the panel won’t even be in touching distance.
The choice of frame colours will then help you make your panel look really good – as you’ll be able to choose from white, silver and black frames.
Included with every single one of our NXT Gen heaters is a brilliant integrated thermostat and a remote control, which means you can fully automate your heating controls straight away.
Make use of the automatic temperature control, which is where your panel regulates the temperature for you. The 7-day timer allows you to set different on/off times for weekdays and weekends.
The panel really is fantastic when you take into account the adaptive start and open window detection. Adaptive start means your panel will work out how early to start heating your room, based on the desired temperature at the desired time. Open window detection is where the panel switches itself off when it detects a sudden temperature drop, as it is inefficient to carry on heating.
Take a look through the NXT Gen IR Panel manual for the lowdown on all the different features the NXT Gen panels have to offer.
The included remote control is protected by a one-year warranty.
Our infrared panels come with a brand new, highly advanced premium FIR Coating to help maximise the performance of your heater. It’s heat-resistant – meaning it can withstand temperatures up to 200oC without yellowing over time.
Not only that, but it will also help the carbon crystal heating element inside the panel distribute the IR waves better than ever before, thanks to a higher thermal efficiency, resulting in even more warmth in your home.
To top it all off, the coating is also far more secure than ever before, as it is fire resistant, ensuring your family and your home stay safe and warm.
If interstellar images aren’t to your tastes, then you should have a look through our selection of 595 x 595 image IR panel heaters, where you can find a huge choice of animal, nature, urban and car prints amongst others.
For example, petrol-heads may enjoy the sights offered by our 595 x 595 Front Grille Printed Infrared Heating Panel 350W. It depicts a close up of the iconic GTI badge from the Volkswagen Golf – a name that has been etched into motoring folklore since the mid-70s.
If your choice of room is perhaps too large for a 350W panel, then you might want to opt for a 605 x 1005 Forest Waterfall Printed Infrared Heater 580W for example – a short waterfall is sandwiched between trees and shrubbery, bringing together two of nature’s elements in the most stunning way possible.
No matter which panel you do go for, a quick visit to our latest deals page could save you a massive chunk off your order total – simply apply the latest code to the checkout and enjoy your money off!
Working out how many panels you need for any given room is much simpler than you might imagine – all you need is a calculator, a measuring tape, and a bit of knowledge about how well insulated your home is.
The first thing you’ll want to do is measure the length, width and height of your room in metres. Once done, you should multiply these figures by each other, which will give you the volume in m3.
Now, the amount of heat you’ll need will depend on how well insulated your home is, or how well it retains heat. Poorly insulated homes will need 30W per m3, moderately insulated homes will need 25W per m3, whilst well insulated homes only need 20W per m3.
Multiplying the recommended wattage per m3 by the volume of your room will give you the total wattage requirement. From here, you can begin to make a decision about how many panels you need.
For example, if the total wattage requirement is 2000W, then a 1200W IR heater and a 700W panel would be adequate, or if you’d rather have a little more heat that you need, a 1200W panel with a 900W IR panel would work equally well.
If you have a change of heart about anything after you’ve made your purchase, then you can make use of our 14 day home trial period, during which you can request a full refund or exchange.
You just need to send the item back in condition fit for sale, along with all the original parts and packaging. Please note though that there will be a 15% restocking fee applied to any returns on this panel.
Should you run into any unlikely issues further down the line, Mirrorstone have you covered with their 2 year replacement warranty.
If you’d like to speak to us about this panel, how to get the most from your panel using our thermostats, why you should become a trade customer or anything else, then please get in contact with us by calling 0116 321 4124, emailing firstname.lastname@example.org, or by posting on our Facebook page!
All panels come with free delivery within 2-3 days, and next day delivery is available for £5.99.
You can return your panel if you are not happy with it within 14 days of receiving it.
To install your panel or bar heater, drill 4 holes into your wall as per the mounting template provided with your heater.
For panels, insert the wall plugs, followed by the screws, and use the cross-hair bolt insertion hole brackets on the back of the panel to mount it in place.
For bar heaters, use the provided screws to mount the brackets onto your wall, and then onto the back of the heater. Use the provided wing nuts to secure the wall brackets and heater brackets together at an angle best suited for your area.
Plug the heater into your mains, or get a qualified electrician to hardwire it for you.
Infrared heaters use up to 60% less energy than electric convection heaters, because they warm up objects rather than the air.
As they have no moving parts, they require zero maintenance.
At just 22mm thick, and best installed at head height, they can save massive amounts of space, allowing you to use your entire floor space.
Our infrared panels are far better looking than conventional radiators, giving your home a more modern look.
Once they have reached the end of their huge 100,000 hour lifespan, they almost fully recyclable, further helping the environment even after they’re no longer fit for use.
|Surface Material||Premium FIR Coating|
|Dimensions (mm)||595mm x 595mm x 22mm|
|IP Rating||IP54 - Protected against splashes of water|
|Warranty||2 Years Extendable To 5 Years|
|Product Features||Built in Thermostat with Remote Control|
|Requirements||Eco Design Requirements for Electric Local Space Heaters|