Natural IR Heat
Hurry Now! 10% Off All Heaters! Use Code: TAKE10
The Andromeda galaxy is a darkish image with a lilac swirl of stars through the centre. IR heating is an efficient way to heat your home that will save you both energy and money.
This Mirrorstone panel measures 595mm by 995mm, and has a power output of 580W. This means that the area it can heat will be around 9-10m2. It has a slim depth of just 22mm, meaning it can be installed very neatly against your wall, without ever looking as clunky as a traditional radiator does. It has an IP54 rating, meaning it can be installed in the bathroom or kitchen, as it’s shielded against any unintentional splashes of water.
The panel is made from top-quality FIR Coating, and the surface can reach temperatures of roughly 75-95˚C. This is only slightly warmer than a traditional radiator. Plus, it can be installed higher up the wall than a normal heater, which means it’s further out of reach, and less likely to be accidentally touched.
It works very similarly to the sun! However, instead of generating any nasty UV radiation, as the sun does, infrared heating only provides infrared beams. These are similar to those that your TV remote produces, so you know that it is completely safe.
These infrared waves reflect around your room, bouncing off of any objects and surfaces, and leaving them warmed. This is completely different to how normal heaters work, as they just heat the air surrounding them. This creates warm-air currents, where the hot air rises, cools, and falls again. This is both inefficient, and has a negative effect on your health. Convectional currents encourage dust circulation, mould growth, and cold spots. Infrared heaters do not do this, making them better for your health.
It’s not just about health and safety, however. Thanks to their unique way of warming your room, they are far more efficient than other heaters. Not only is this amazing for the environment, it’s also amazing for you. That’s because infrared heating can save you approximately 60% on your heating bills!
Our infrared panels come with a brand new, highly advanced premium FIR Coating to help maximise the performance of your heater. It’s heat-resistant – meaning it can withstand temperatures up to 200oC without yellowing over time.
Not only that, but it will also help the carbon crystal heating element inside the panel distribute the IR waves better than ever before, thanks to a higher thermal efficiency, resulting in even more warmth in your home.
To top it all off, the coating is also far more secure than ever before, as it is fire resistant, ensuring your family and your home stay safe and warm.
Every one of our NXT Gen IR panels now comes with a built-in thermostat and remote control, meaning that they all conform to the Lot 20 regulations. This means that you can have total automated control of your panels once you get them, with no hidden additional extras! The remote control can actually be paired to multiple heaters, so that you can control them as a group.
The seven-day timer means you can customise your heating times across a wide spectrum of all week. Our NXT Gen IR Panel manual has full details of all the different features’ functionality, so take a look at the future of heating today!
The included remote comes with a comprehensive one-year warranty.
The real headline features are the adaptive start and open window detection. With adaptive start enabled, your IR heater will work out how long it’ll take to warm your room up to the desired temperature, then automatically switch on to ensure that your room warms up at the right time. This is perfect for those frosty mornings!
The amazing automated temperature control means that your panel will do the hard work for you. Just set the desired temperature and this heater will switch on and off automatically in order to regulate your room temperature. Open window detection means that if your panel detects a sudden drop in temperature – around 1.5˚C in 3 minutes – it will switch off, as attempting to continue heating is extremely inefficient.
These heaters are relatively straightforward to install. There’s no tricky electrical or plumbing work whatsoever, so you don’t even need to think about calling any technical help in. In fact, no assistance is needed at all, as it’s such an easy job to do. We supply a helpful stencil that shows you exactly where you have to drill the holes into the wall. Just do this, and put the screws in. Then, it’s as simple as mounting the panel onto the wall using the rear-mounted brackets.
It’s completely plug-and-play compatible, with a UK mains 3-pin plug, and two-metre long power cable included. It can also be suspended from the ceiling, or made to be portable using our infrared heater stands.
Another from our cosmos collection comes the stunning 595x995 Helix Nebula NXT Gen Infrared Heating Panel 580W. It depicts, naturally, the helix nebula, with a stunning representation of outer space that will look dazzling on your wall.
The second image recommendation is a little different – the 595x995 Sailboat NXT Gen Infrared Heating Panel 580W. The main focus of this image is the regal-looking sailboat in the centre of the photo, with a vivid blue sky and sea. In the background is a stony island.
This panel comes with a extendable two-year warranty, such is our confidence in the product. We also provide a 14-day home trial period, during which you can replace or return the item. This is subject to a small 15% restocking fee, as this the panel will have been printed on.
All panels come with free delivery within 2-3 days, and next day delivery is available for £5.99.
You can return your panel if you are not happy with it within 14 days of receiving it.
To install your panel or bar heater, drill 4 holes into your wall as per the mounting template provided with your heater.
For panels, insert the wall plugs, followed by the screws, and use the cross-hair bolt insertion hole brackets on the back of the panel to mount it in place.
For bar heaters, use the provided screws to mount the brackets onto your wall, and then onto the back of the heater. Use the provided wing nuts to secure the wall brackets and heater brackets together at an angle best suited for your area.
Plug the heater into your mains, or get a qualified electrician to hardwire it for you.
Infrared heaters use up to 60% less energy than electric convection heaters, because they warm up objects rather than the air.
As they have no moving parts, they require zero maintenance.
At just 22mm thick, and best installed at head height, they can save massive amounts of space, allowing you to use your entire floor space.
Our infrared panels are far better looking than conventional radiators, giving your home a more modern look.
Once they have reached the end of their huge 100,000 hour lifespan, they almost fully recyclable, further helping the environment even after they’re no longer fit for use.
|Surface Material||Premium FIR Coating|
|Dimensions (mm)||995mm x 595mm x 22mm|
|IP Rating||IP54 - Protected against splashes of water|
|Warranty||2 Years Upgradable to 5 Years|
|Product Features||Built in Thermostat with Remote Control|
|Requirements||Eco Design Requirements for Electric Local Space Heaters|