Natural IR Heat
Hurry Now! 10% Off All Heaters! Use Code: TAKE10
The busy French street is incredibly rendered by Camille Pissarro for this amazing painting. Added to an infrared heater, and you’re in for a treat. The heater is smart, efficient, and has loads of different advantages when compared to other heating methods.
The panel measures approximately 595mm by 995mm, and with its 580W power usage, can heat an area that’s around 9-10m2. It’s just 22mm in depth, so can fit very closely against the wall. It has an IP54 rating, and is therefore protected against splashes of water.
The sturdy FIR Coating surface of the panel reaches a maximum temperature of around 75-95˚C. Whilst this is slightly hotter than a standard radiator, it shouldn’t be an issue, because it can be installed higher up on the wall. This will therefore minimise any accidental touches.
Infrared heating is a fantastic new heating method that can revolutionise the way that you heat your home incredibly. It’s extremely environmentally friendly, thanks to how it dissipates its warmth when compared to normal radiators. They can actually save you an amazing 60% on your heating bills! IR heating works by heating the actual objects around the room, rather than just the air near them. It does this by firing infrared beams around the setting, which bounce off of the objects, leaving them warmed.
Traditional heaters therefore cause warm-air currents, as they just heat the air around them. This is where the heated air rises to the ceiling, cools, and falls again, requiring reheating. This is both inefficient, and detrimental to your respiratory health. That’s because they cause dust circulation, mould growth, and cold spots around your home. This is how infrared heating is so much better for your overall health.
IR heating is completely safe, even if it does sound a little scary. It’s just the same technology that TV remotes use to control the volume, and the sun actually uses IR waves to heat the earth! However, unlike the sun, IR heating produces absolutely no nasty UV radiation.
Our infrared panels come with a brand new, highly advanced premium FIR Coating to help maximise the performance of your heater. It’s heat-resistant – meaning it can withstand temperatures up to 200oC without yellowing over time.
Not only that, but it will also help the carbon crystal heating element inside the panel distribute the IR waves better than ever before, thanks to a higher thermal efficiency, resulting in even more warmth in your home.
To top it all off, the coating is also far more secure than ever before, as it is fire resistant, ensuring your family and your home stay safe and warm.
Every single NXT Gen IR panel now come with a built-in thermostat, meaning they are compliant with the Lot 20 legislation that was introduced at the start of 2018. Along with the bundled remote control, you can fully control your heating straight away, and even allow some aspects to be automated. The remote control can actually be paired with multiple heaters, in order to control them as a group or zone.
Take a look through our NXT Gen IR Panel manual for more information on how these panels will revolutionise your home’s heating, with all its different efficiency features.
The remote control comes with a comprehensive one-year warranty, for your peace of mind.
With the excellent automatic temperature control, you can regulate your room’s temperature with ease. The panel will automatically turn on and off in order to keep your room at your intended temperature. The 7-day timer means you can customise when your heating is on or off on both weekdays and weekends.
That’s not all, though – the NXT Gen panels come with two more show-stopping features. The adaptive start function means that your panel can calculate how much earlier it needs to switch on, in order for your room to reach the intended temperature at the desired time. The open window detection feature switches your heater off if there’s a sudden temperature drop, as it’s uneconomical to run a heater in those conditions.
This infrared heater is exceptionally slim, which makes it possible to mount them extremely closely to the wall. They can be installed much higher up on the wall than standard heaters can, as you don’t have to worry about heat rising to the ceiling. This means that it can be an attractive feature of your wall, rather than an awkward eyesore.
The Boulevard Montmartre at Night depicts the Parisian street at night. It’s well-known for its incredible representation of light, with three different sources of light well replicated. Pissarro mimics the light pollution from the busy area very well, with a light gradient of colour in the night sky. It’s the best way to disguise your heating and improve your interior design in one go.
Our first suggestion goes to another from our artistic category – the 595x995 Banks of Marne NXT Gen Infrared Heating Panel 580W. Paul Cézanne’s amazing impressionist painting is brought to life by the fantastic replication on this infrared heating panel.
We have many different panels in our nature category, too, including the 595x995 Rolling Cloud NXT Gen Infrared Heating Panel 580W. It features a luscious emerald valley, with a thick fog drifting across. The sky is a vibrant blue colour.
We provide every single one of our image panels with amazing two-year warranties, to protect your purchase and give you complete confidence when shopping with us.
We also supply you a 14-day home trial period, in case you wish to return or exchange the product. This is subject to a small 15% restocking fee, as it needs to be printed on.
If you require any extra information about our fantastic heaters, make sure you get in touch. Call us on 0116 321 4124, email us at email@example.com, or visit us on our Facebook, Instagram, or Twitter.
All panels come with free delivery within 2-3 days, and next day delivery is available for £5.99.
You can return your panel if you are not happy with it within 14 days of receiving it.
To install your panel or bar heater, drill 4 holes into your wall as per the mounting template provided with your heater.
For panels, insert the wall plugs, followed by the screws, and use the cross-hair bolt insertion hole brackets on the back of the panel to mount it in place.
For bar heaters, use the provided screws to mount the brackets onto your wall, and then onto the back of the heater. Use the provided wing nuts to secure the wall brackets and heater brackets together at an angle best suited for your area.
Plug the heater into your mains, or get a qualified electrician to hardwire it for you.
Infrared heaters use up to 60% less energy than electric convection heaters, because they warm up objects rather than the air.
As they have no moving parts, they require zero maintenance.
At just 22mm thick, and best installed at head height, they can save massive amounts of space, allowing you to use your entire floor space.
Our infrared panels are far better looking than conventional radiators, giving your home a more modern look.
Once they have reached the end of their huge 100,000 hour lifespan, they almost fully recyclable, further helping the environment even after they’re no longer fit for use.
|Surface Material||Premium FIR Coating|
|Dimensions (mm)||995mm x 595mm x 22mm|
|IP Rating||IP54 - Protected against splashes of water|
|Warranty||2 Years Upgradable to 5 Years|
|Product Features||Built in Thermostat with Remote Control|
|Requirements||Eco Design Requirements for Electric Local Space Heaters|