Natural IR Heat
Hurry Now! 10% Off All Heaters! Use Code: BIG10
14 Days Home Trial
5 Year Warranty*
Natural IR Heat
10-14 Day Delivery
Camille Pissarro’s amazing painting from his series of Boulevard Montmartre depictions is replicated for your heating pleasure. That’s right, this painting is actually an amazing infrared heating panel, disguised to blend into your interior design. IR heating has lots of different advantages over other types of heaters.
This panel measures 595mm by 995mm, with wattage of 580W. This means it can heat an area of around 9-10m2. It has a depth of just 22mm, meaning it can be installed very closely against your wall.
This panel is made from premium quality FIR Coating, which can reach a maximum surface temperature of between 75 and 95˚C. This is the same as a standard radiator, but these can obviously be installed much higher up on the wall. This means that they are less likely to be accidentally touched by prying fingers. It comes with an IP54 rating, to protect it against accidental splashes of water – it can therefore be fitted in the kitchen or bathroom, if so desired.
One of the best benefits of infrared heating is how kind it is to the environment, and how this translates into enormous savings on your heating bills. Infrared heating can actually save you a colossal 60% on your heating bills! It does this is by heating the objects in the room, rather than just the air near the panel. The infrared beams that it emits bounce off the objects in the room, leaving them warmed.
This means that infrared heating doesn’t produce convectional currents. This is where the air that’s been heated rises, cools, and falls again, requiring even more heat. This isn’t just inefficient - it can cause dust circulation, mould growth, and cold spots, all of which can negatively influence your health. Infrared heating, however, can have a positive effect on your health.
Infrared heating is also completely safe, having undergone extensive testing from the manufacturers. It’s basically the same technology that your TV remote at home uses, just on a much larger scale, of course. In fact, infrared waves are exactly how the sun warms the earth, except infrared heaters don’t produce any harmful ultraviolet radiation!
Our infrared panels come with a brand new, highly advanced premium FIR Coating to help maximise the performance of your heater. It’s heat-resistant – meaning it can withstand temperatures up to 200oC without yellowing over time.
Not only that, but it will also help the carbon crystal heating element inside the panel distribute the IR waves better than ever before, thanks to a higher thermal efficiency, resulting in even more warmth in your home.
To top it all off, the coating is also far more secure than ever before, as it is fire resistant, ensuring your family and your home stay safe and warm.
Our NXT Gen IR Panels change the market once more, thanks to built-in thermostats and remote controls included with every NXT Gen heater. This means all our panels are compliant with the Lot 20 legislation that all space heaters need to comply with to be legally sold in the UK.
For you, this means a whole new world of possibility and control. Automatic temperature control allows you to set a temperature, and your IR heater will then maintain it by switching on and off. The 7-day timer takes this further, and allows you to set on/off times on weekdays and weekends.
As standard, all remote controls come with a 12 month warranty.
Taking things up a notch, they also come with adaptive start. This switches the panel on early to ensure that your room is up to the temperature you need it at the time you need it. It does this by calculating how long it will take to warm up your room, so you no longer need to guess!
Then, we have open window technology, to take the energy saving even further. When the panel detects a sudden drop in temperature as a result of an open window, it will switch off in order to save energy.
A quick look through our NXT Gen IR Panel manual reveals the full extent of the heater’s capabilities.
These infrared heating panels are so simple to install, with straightforward instructions to follow. This means there’s no need to worry at all, as you’re guided through every simple step. As the panels are fully plug-and-play compatible, you shouldn’t have any issues at all. To mount them onto the wall, you just have to use the stencil that’s included with your panel. This shows you exactly where to drill the holes.
Slip the screws into the wall, then hang the panel onto the two brackets on the rear. It’s just a quick task for you, with no additional help required. It can also be suspended from the ceiling, or made to be portable using an infrared heater stand.
Straight from our artistic category comes a fantastic piece of art from the legendary Japanese artist Hokusai. The 595x995 Reflection in Lake at Misaka in Kai Province NXT Gen Infrared Heating Panel 580W delivers an incredible image that will heighten your room’s class, with a reflection of Mount Fuji in the water below.
Another brilliant image for your heater is the particularly peaceful-looking 595x995 Water Pebbles NXT Gen Infrared Heating Panel 580W. It features a small mound of pebbles poised on top of each other, in the centre of a lake. In the background is a blurred forest area, leading to a very calm image.
Mirrorstone provide a extendable two-year warranty with every one of our image panels, in the unlikely event that something goes wrong. We also provide a 14-day home trial period, in case you wish to return or exchange the item. This is subject to a small 15% restocking fee, as the panel would of course need to have the image printed on.
Speak to someone from our friendly customer services team if you have any questions or issues. Call us on 0116 321 4124, email us at email@example.com, or visit us on our Facebook, Instagram, or Twitter.
All panels come with free delivery within 2-3 days, and next day delivery is available for £5.99.
You can return your panel if you are not happy with it within 14 days of receiving it.
To install your panel or bar heater, drill 4 holes into your wall as per the mounting template provided with your heater.
For panels, insert the wall plugs, followed by the screws, and use the cross-hair bolt insertion hole brackets on the back of the panel to mount it in place.
For bar heaters, use the provided screws to mount the brackets onto your wall, and then onto the back of the heater. Use the provided wing nuts to secure the wall brackets and heater brackets together at an angle best suited for your area.
Plug the heater into your mains, or get a qualified electrician to hardwire it for you.
Infrared heaters use up to 60% less energy than electric convection heaters, because they warm up objects rather than the air.
As they have no moving parts, they require zero maintenance.
At just 22mm thick, and best installed at head height, they can save massive amounts of space, allowing you to use your entire floor space.
Our infrared panels are far better looking than conventional radiators, giving your home a more modern look.
Once they have reached the end of their huge 100,000 hour lifespan, they almost fully recyclable, further helping the environment even after they’re no longer fit for use.
|Surface Material||Premium FIR Coating|
|Dimensions (mm)||995mm x 595mm x 22mm|
|IP Rating||IP54 - Protected against splashes of water|
|Warranty||2 Years Upgradable to 5 Years|
|Product Features||Built in Thermostat with Remote Control|
|Requirements||Eco Design Requirements for Electric Local Space Heaters|