Natural IR Heat
Hurry Now! 10% Off All Heaters! Use Code: SUPER10
If you’d like to join the new wave of heating your home, then infrared heating could be the way forward for you. It’s smart, it’s efficient, and can save you lots of money. It has lots of different advantages over central heating.
The 595x995 Coastal Beauty NXT Gen Infrared Heating Panel 580W measures approximately 595mm by 995mm, with a power output of 580W. This means it can heat an area of around 9-10m2. It measures just 22mm in depth, meaning it can slot very neatly against the wall. It comes with an IP54 rating, which should protect it against splashes of water.
The surface of the panel is constructed from premium FIR Coating materials, meaning it is sturdy and attractive. It can reach a surface temperature of around 75-95˚C, which is only slightly hotter than a standard radiator. This is not an issue, however, as they can be installed higher up on the wall than traditional heaters, negating the possibility of potential burns.
Infrared heating is a groundbreaking technology that can revolutionise the way that you heat your home, office, or warehouse. It’s extremely eco-friendly, thanks to how it distributes its heat, when compared to standard radiators. They can actually save you around 60% on your heating bills! An infrared heater works by heating the objects in the room, rather than just the air around the room. This is by emitting infrared beams, which bounce off of the objects, leaving them warmed.
A traditional heater, however, heats the air, which rises to the ceiling, cools, and fails again, creating a convectional current. This leads to issues such as dust circulation, cold spots, and mould growth. This is why infrared heating is seen as better for your health.
The technology used by infrared heaters is similar to that used by TV remote controls, making it completely safe to use. In fact, the heat it generates is the same as the sun’s, yet without any of the harmful ultraviolet radiation that the sun also produces.
Our infrared panels come with a brand new, highly advanced premium FIR Coating to help maximise the performance of your heater. It’s heat-resistant – meaning it can withstand temperatures up to 200oC without yellowing over time.
Not only that, but it will also help the carbon crystal heating element inside the panel distribute the IR waves better than ever before, thanks to a higher thermal efficiency, resulting in even more warmth in your home.
To top it all off, the coating is also far more secure than ever before, as it is fire resistant, ensuring your family and your home stay safe and warm.
With one of our NXT Gen IR Panels, you will get some incredible functionality. They come with a built-in thermostat and remote control, which means they are all compliant with the Lot 20 legislation that was introduced at the start of 2018. This means that these panels can be automatically controlled straight out of the box! The remote can actually be paired with multiple heaters, in order to control them as a group.
It has a 7-day timer, too, that allows you to set different on/off times for weekdays and weekends. Our NXT Gen IR Panel manual has full details of the functionality, and how this heater will genuinely improve your livelihood.
The remote control is covered by an extensive one-year manufacturer’s warranty.
Where the panel truly works its magic is through the adaptive start and open window detection. Adaptive start means that your panel uses its brain to work out when to switch on to make sure that your room is at your desired temperature at your desired time. This means no more random guesswork for you. The open window detection means that if there’s a sudden temperature drop, like when you open a window, the panel will switch off, to save you energy.
Automated temperature control allows you to set the desired temperature for your room, and let the panel does the work. It turns on and off to make sure that your room stays at the temperature you’re after.
These panels are extremely easy to install, requiring no prior knowledge or expertise. This means that you don’t have to worry about hiring any electricians, plumbers, or carpenters to give you a hand. It’s a complete one-person job that shouldn’t take too long. All you have to do is follow the helpful stencil that’s included in the box. Just use this to show you where to drill the holes. After you’ve done that, just put the screws in the wall, followed by hanging the panel on to the screws using the brackets on the rear.
Thanks to the slender width of just 22mm, these can be installed extremely closely against the wall. They can even be installed much higher up on the wall, without it affecting the heat. That’s because you don’t need to worry about the heat rising. This means that your heater can be an aesthetic feature in your home, not an unattractive afterthought.
The Coastal Beauty is just that – a beauty. It depicts a bay of water that looks strangely peaceful. It’s surrounded by cliffs on two sides, which are covered in a luscious green carpet of trees. The sky is overcast, but not cold-looking. It’s a brilliant way to disguise your heating as something that looks nothing like a heater.
For something a little similar, we have the glorious 595x995 Glacial Brook NXT Gen Infrared Heating Panel 580W. A hilly valley is disrupted by a babbling brook flowing through it. It is disrupted in design rather than tranquillity, with gorgeous green hills flanking it to either side, and a clear blue sky sparkling overhead.
We provide an two-year warranty, in order to protect your purchase. You can further extend this to five-years by filling in a form. We also supply a 14-day home trial period, in case you wish to return or exchange the item. There would be, however, a small 15% restocking fee, as the panel would need to be printed in.
If you need to speak to us about infrared heating, our team will be happy to assist you. Call us on 0116 321 4124, email us at firstname.lastname@example.org, or visit us on Facebook, Twitter, or Instagram.
All panels come with free delivery within 2-3 days, and next day delivery is available for £5.99.
You can return your panel if you are not happy with it within 14 days of receiving it.
To install your panel or bar heater, drill 4 holes into your wall as per the mounting template provided with your heater.
For panels, insert the wall plugs, followed by the screws, and use the cross-hair bolt insertion hole brackets on the back of the panel to mount it in place.
For bar heaters, use the provided screws to mount the brackets onto your wall, and then onto the back of the heater. Use the provided wing nuts to secure the wall brackets and heater brackets together at an angle best suited for your area.
Plug the heater into your mains, or get a qualified electrician to hardwire it for you.
Infrared heaters use up to 60% less energy than electric convection heaters, because they warm up objects rather than the air.
As they have no moving parts, they require zero maintenance.
At just 22mm thick, and best installed at head height, they can save massive amounts of space, allowing you to use your entire floor space.
Our infrared panels are far better looking than conventional radiators, giving your home a more modern look.
Once they have reached the end of their huge 100,000 hour lifespan, they almost fully recyclable, further helping the environment even after they’re no longer fit for use.
|Surface Material||Premium FIR Coating|
|Dimensions (mm)||995mm x 595mm x 22mm|
|IP Rating||IP54 - Protected against splashes of water|
|Warranty||2 Years Upgradable to 5 Years|
|Product Features||Built in Thermostat with Remote Control|
|Requirements||Eco Design Requirements for Electric Local Space Heaters|