Natural IR Heat
Hurry Now! 10% Off All Heaters! Use Code: SUPER10
If you wish to either replace your heating system, or supplement it massively, then infrared heating is the perfect place to start. It’s smart, it’s environmentally-friendly, and it can save you lots of money.
The 595x995 Frozen Twilight NXT Gen Infrared Heating Panel 580W measures approximately 595mm by 995mm, and with its power output of 580W, can warm an area that’s roughly 9-10m2. It has a depth of just 22mm, which means it can fit very flush against your wall.
The panel is made from an attractive, strong FIR Coating. It can reach a surface temperature of roughly 75-95˚C, which is only slightly warmer than a traditional heater is. Don’t forget, however, that these heaters can be installed much higher up on your wall than a normal heater can, negating the possibility of accidental burns. It comes with an IP54 rating, which means it should be protected from splashes of water.
One of the best things about infrared heating is just how eco-friendly it is, using hardly any energy when compared to other types of heaters. In fact, infrared heating can actually save you around 60% on your heating bills! It does this by firing infrared beams around the room, which bounce off of the objects, leaving them warmed.
Infrared heating doesn’t cause any convectional currents in your room, because it doesn’t just warm the air. These currents are where the air warms, rises, cools, falls, and is warmed again. This is very inefficient, and can actually be bad for you. They can cause cold spots, mould growth, and dust circulation. Infrared heating doesn’t do this, and is therefore better for your health.
Infrared heating is completely safe for you, even if it does sound scary. It’s the same kind of technology that TV remotes use, although a little more powerful, of course. They provide the same heat as the sun, but without any harmful UV radiation – at all!
Our infrared panels come with a brand new, highly advanced premium FIR Coating to help maximise the performance of your heater. It’s heat-resistant – meaning it can withstand temperatures up to 200oC without yellowing over time.
Not only that, but it will also help the carbon crystal heating element inside the panel distribute the IR waves better than ever before, thanks to a higher thermal efficiency, resulting in even more warmth in your home.
To top it all off, the coating is also far more secure than ever before, as it is fire resistant, ensuring your family and your home stay safe and warm.
When you buy one of our NXT Gen IR Panels, you now get a built-in thermostat and remote control, making them 100% compliant with the Lot 20 legislation. This means you can get smart, automated heating as soon as you install your heater, with no fuss to get these extra features sorted out.
It also comes with a 7-day timer, too, meaning you can have different on/off times for both weekdays and weekends, making those lie-ins extra great.
For more information on these brilliant NXT Gen heaters, see our NXT Gen IR Panel manual, and see just how fantastic they truly are.
The remote control is covered by an extensive 12-month warranty too, for peace of mind.
With adaptive start, your IR panel does the maths for you in order to warm your room to the target temperature for the time you suggest. So if you want your room to be 23˚C at 7am, it will work out what time it needs to switch on before then in order to ensure your room is warm enough.
With the automatic temperature control, it’s simple to keep to a target temperature in your room. Just tell the panel what you’d like the temperature to stay at, and the panel will automatically turn on and off to regulate the level of heat.
And with the open window detection, your panel will switch off if it detects that the window is open.
These infrared panel heaters are extremely straightforward to install, with no complicated work necessary. Yes, that’s right – no plumbers, electricians, carpenters, or your neighbours coming around to help. It’s a complete one-person job, so you have no need to worry. Just use the useful stencil that we have provided, and drill the holes into the wall. Once you’ve put the screws into these holes, you just need to hang the panel onto them, using the rear-mounted brackets.
The panels are fully plug-and-play compatible, with a UK mains 3-pin plug, and a 2m power cable. The heaters can also be suspended from the ceiling, or made to be portable, using an infrared heater stand.
This panel measures just 22mm in depth, which means it’s perfect for fitting flush against the wall. They can of course be installed much higher up on the wall than traditional radiators, meaning you can save lots of space. It also means you can make your heater into more of an aesthetic feature than just an ugly necessity.
The Frozen Twilight image is a rather stunning one. It depicts some frozen trees in a snowy field, with a spectacular pink sky behind them. The pink sky gives the snow a rather lilac tinge that makes the entire picture gorgeous. Disguising your heater as a picture makes this an extremely discreet heating solution.
We also have some very similar and different images. A fairly similar one is the 595x995 Washing Landscape NXT Gen Infrared Heating Panel 580W. It has a gorgeous scene consisting of a small group of trees standing in the middle of a wet beach. The sky is absolutely spectacular, with streaks of pink, purple, and orange illuminating the land.
The next image is one that’s completely different. Whilst it’s still from our nature category, the 595x995 Clouded Trees NXT Gen Infrared Heating Panel 580W is completely greyscale, with thick clouds rolling across a forest scene.
We provide our image panels with comprehensive two-year warranties, to protect your purchase. You can extend this to five-years by simply filling out a warranty form.
We also give you a 14-day home trial period, in case you wish to return or exchange the product. This is susceptible to a small 15% restocking fee, as this is a special order item.
All panels come with free delivery within 2-3 days, and next day delivery is available for £5.99.
You can return your panel if you are not happy with it within 14 days of receiving it.
To install your panel or bar heater, drill 4 holes into your wall as per the mounting template provided with your heater.
For panels, insert the wall plugs, followed by the screws, and use the cross-hair bolt insertion hole brackets on the back of the panel to mount it in place.
For bar heaters, use the provided screws to mount the brackets onto your wall, and then onto the back of the heater. Use the provided wing nuts to secure the wall brackets and heater brackets together at an angle best suited for your area.
Plug the heater into your mains, or get a qualified electrician to hardwire it for you.
Infrared heaters use up to 60% less energy than electric convection heaters, because they warm up objects rather than the air.
As they have no moving parts, they require zero maintenance.
At just 22mm thick, and best installed at head height, they can save massive amounts of space, allowing you to use your entire floor space.
Our infrared panels are far better looking than conventional radiators, giving your home a more modern look.
Once they have reached the end of their huge 100,000 hour lifespan, they almost fully recyclable, further helping the environment even after they’re no longer fit for use.
|Surface Material||Premium FIR Coating|
|Dimensions (mm)||995mm x 595mm x 22mm|
|IP Rating||IP54 - Protected against splashes of water|
|Warranty||2 Years Upgradable to 5 Years|
|Product Features||Built in Thermostat with Remote Control|
|Requirements||Eco Design Requirements for Electric Local Space Heaters|