Natural IR Heat
Hurry Now! 10% Off All Heaters! Use Code: SUPER10
Édouard Manet’s lovely painting, the Music in the Tuileries has been appropriated for this gorgeous heater design. That’s right – this gorgeous canvas-looking fixture for your wall is actually an infrared heater. This means that you could get a stunning addition on your wall as well as smart, efficient heat.
This Mirrorstone panel measures 595mm by 995mm, and has a wattage of 580W, meaning it can heat an area of approximately 9-10m2. It has a depth of just 22mm, meaning it can be installed very flush against your wall.
This panel is made from premium quality FIR Coating, which can reach a maximum surface temperature of between 75 and 95˚C. This is the same as a traditional radiator, but these can obviously be installed higher up on the wall. This means that they are less likely to be accidentally touched. It comes with an IP54 rating, to protect it against splashes of water – it can therefore be fitted in the kitchen or bathroom, if so desired.
Infrared heating is an innovative new way of heating your home that doesn’t reply on the old-fashioned techniques that normal heaters do. Rather than heating the air surrounding it, IR heating emits infrared beams, which bounce off of the objects and surfaces, leaving them warmed. This is more efficient, using far less energy. In fact, switching to infrared heating can save you a huge 60% on your heating bills!
It’s completely safe, despite it sounding a little scary. Infrared technology has a huge range of applications, including TV remote controls, laser quest games, and even night vision goggles! In fact, it’s the same heat that the sun provides, but with no nasty UV radiation whatsoever!
IR heating can actually be beneficial to your health. Traditional heaters create convectional currents, where the warmed air rises to the ceiling, cools, and falls again. This promotes cold spots, mould growth, and dust circulation!
Our infrared panels come with a brand new, highly advanced premium FIR Coating to help maximise the performance of your heater. It’s heat-resistant – meaning it can withstand temperatures up to 200oC without yellowing over time.
Not only that, but it will also help the carbon crystal heating element inside the panel distribute the IR waves better than ever before, thanks to a higher thermal efficiency, resulting in even more warmth in your home.
To top it all off, the coating is also far more secure than ever before, as it is fire resistant, ensuring your family and your home stay safe and warm.
Every one of our NXT Gen IR panels now comes with a built-in thermostat and remote control, meaning that they all conform to the Lot 20 regulations. This means that you can have total automated control of your panels once you get them, with no hidden additional extras!
The amazing automated temperature control means that your panel will do the hard work for you. Just set the desired temperature and this heater will switch on and off automatically in order to regulate your room temperature. Plus, the seven-day timer means you can customise your heating times across a wide spectrum of all week.
The included remote comes with a comprehensive one-year warranty.
The real headline features are the adaptive start and open window detection. With adaptive start enabled, your IR heater will work out how long it’ll take to warm your room up to the desired temperature, then automatically switch on to ensure that your room warms up at the right time. This is perfect for those frosty mornings!
Open window detection means that if your panel detects a sudden drop in temperature – around 1.5˚C in 3 minutes – it will switch off, as attempting to continue heating is extremely inefficient.
Our NXT Gen IR Panel manual has full details of all the different features’ functionality, so take a look at the future of heating today!
It really is a very easy task to install your brilliant infrared heating panel. In the most basic terms, all you’ll really need to do is just take it out of the box, and plug it in to the wall socket. However, if you’re mounting your panel, then there are just a couple of extra easy steps to adhere to.
You won’t need anyone to help, as it’s just a one-person job. We provide a useful stencil, which shows you exactly where to drill the holes into the wall.
Once the screws are in the wall, you just have to hang the panel onto them, using the two rear brackets. Then, just plug it into the mains socket using the UK 3-pin plug, and the generous 2m of cable.
If you’re a fan of the artistic talent on show here in the La Musique au Tuileries, then check out something by Monet, who was influenced by this painting. The 595x995 Water Lilies NXT Gen Infrared Heating Panel 580W is a fantastic addition to any home, with its gorgeous blue and green colouring.
We provide an extendable two-year warranty with all of our infrared panel heaters, to give you complete peace of mind.
We also give you a great 14-day home trial period, in case you wish to return or exchange the item. This is subject to a small 15% restocking fee, however, as it would need to be printed on.
All panels come with free delivery within 2-3 days, and next day delivery is available for £5.99.
You can return your panel if you are not happy with it within 14 days of receiving it.
To install your panel or bar heater, drill 4 holes into your wall as per the mounting template provided with your heater.
For panels, insert the wall plugs, followed by the screws, and use the cross-hair bolt insertion hole brackets on the back of the panel to mount it in place.
For bar heaters, use the provided screws to mount the brackets onto your wall, and then onto the back of the heater. Use the provided wing nuts to secure the wall brackets and heater brackets together at an angle best suited for your area.
Plug the heater into your mains, or get a qualified electrician to hardwire it for you.
Infrared heaters use up to 60% less energy than electric convection heaters, because they warm up objects rather than the air.
As they have no moving parts, they require zero maintenance.
At just 22mm thick, and best installed at head height, they can save massive amounts of space, allowing you to use your entire floor space.
Our infrared panels are far better looking than conventional radiators, giving your home a more modern look.
Once they have reached the end of their huge 100,000 hour lifespan, they almost fully recyclable, further helping the environment even after they’re no longer fit for use.
|Surface Material||Premium FIR Coating|
|Dimensions (mm)||995mm x 595mm x 22mm|
|IP Rating||IP54 - Protected against splashes of water|
|Warranty||2 Years Upgradable to 5 Years|
|Product Features||Built in Thermostat with Remote Control|
|Requirements||Eco Design Requirements for Electric Local Space Heaters|