The Moulin Rouge depicts Henri de Toulouse-Lautrec’s spectacular piece of art. A busy scene at the cabaret is almost ignored, as the aristocratic woman at the front of the image is fully in focus. It’s not just a painting, however – this is an infrared heater, bringing all the amazing advantages over other heating methods to your home.
Measuring 595mm by 995mm, this heater has a 580w heat output. This means that it can heat an area that’s roughly 9-10m2 in size. It measures 22mm in depth, which allows it to fit extremely closely to your wall. With its IP54 rating, it is protected against splashes of water.
The strong FIR Coating surface can reach a maximum temperature of around 75-95˚C. This is slightly hotter than a traditional heater, although you’re less likely to be burned by it. That’s because they can be installed much higher up on the wall than standard radiators, negating the risk of accidental touches.
Infrared heating is an innovative new way of heating your home that doesn’t rely on the outdated techniques that standard heaters do. Rather than heating the surrounding air, infrared heaters use infrared beams to heat the surfaces in the room. This is far more efficient, using much less energy, and being able to save you around 60% on your heating bills!
Because they heat objects, not the air, IR heaters don’t form convectional currents. This is where the warmed air rises, cools, and falls again, requiring more heat. This is inefficient, and also bad for your health. That’s because these currents can promote dust circulation, cold spots, and mould growth. As infrared heating does not do this, it is seen as better for your health.
Infrared heating is also completely safe. Despite them sounding scary, infrared beams are just what the sun uses to heat the earth. Although the sun provides nasty UV radiation, IR heating does not. It’s just the same technology as your TV remote, but on a larger scale, of course!
Our infrared panels come with a brand new, highly advanced premium FIR Coating to help maximise the performance of your heater. It’s heat-resistant – meaning it can withstand temperatures up to 200oC without yellowing over time.
Not only that, but it will also help the carbon crystal heating element inside the panel distribute the IR waves better than ever before, thanks to a higher thermal efficiency, resulting in even more warmth in your home.
To top it all off, the coating is also far more secure than ever before, as it is fire resistant, ensuring your family and your home stay safe and warm.
Included with every one of our NXT Gen IR Panels is a built-in thermostat and remote control, ensuring all our heaters are compliant with the Lot 20 legislation. This means you can have automated control of your panels from day one, with no additional purchases necessary! The remote control can actually be paired with multiple heaters, if desired, in order for you to control them as a group or a zone.
Automated temperature control allows you to set a target temperature for your room, and the panel will switch on and off on its own to regulate the level of heat. The included remote control comes with a 1 year warranty.
You also have a 7-day timer at your disposal too, which allows you to set different on and off times for the weekdays and weekends.
Where the panel gets really clever though is the adaptive start and open window detection. Switching adaptive start on means your IR Heater will calculate how much time it will take for your room to get to your target temperature for the time you have set, and will switch on early to make up the difference! Open window detection means that your panel will switch off if it detects a sudden drop in temperature, as this is highly inefficient.
For full details, take a look at our NXT Gen IR Panel manual, and discover how NXT Gen is about to revolutionise the heating market again.
These heaters are extremely straightforward to install. There’s no complicated plumbing or electrical work, so you don’t have to worry about asking any expert assistance in. In fact, you shouldn’t need any help at all, as it’s only really a DIY job.
We supply a helpful template with your panel that shows you exactly how to mount them on the wall. Just make two holes into the wall, and put the screws in. After that, just mount the panel up using the rear mounted brackets.
It’s absolutely plug-and-play compatible, with a UK mains 3-pin plug and 2 metre long power cable supplied. It can also be suspended from the ceiling, or made portable with one of our infrared heater stands.
If you prefer something a little more modern, check out this spectacular photo of a stunning skyline. The 595x995 Red Sky NXT Gen Infrared Heating Panel 580W shows a tumultuous arrangement of clouds with a reddish tone.
All of our lovely image panels come with a comprehensive two-year warranty, so your purchase will be fully protected in the unlikely event that something goes wrong You can extend this to five-years by filling out one of our warranty forms.
There’s also an amazing 14-day home trial period, in case you wish to return or exchange it. This is subject to a small 15% restocking fee, however, as the panel would need to be printed on.
If you have any questions about infrared heating, or this product in particular, then our team can help you. Call us on 0116 321 4124, email us at firstname.lastname@example.org, or check out our Facebook, Instagram, or Twitter.
All panels come with free delivery within 2-3 days, and next day delivery is available for £5.99.
You can return your panel if you are not happy with it within 14 days of receiving it.
To install your panel or bar heater, drill 4 holes into your wall as per the mounting template provided with your heater.
For panels, insert the wall plugs, followed by the screws, and use the cross-hair bolt insertion hole brackets on the back of the panel to mount it in place.
For bar heaters, use the provided screws to mount the brackets onto your wall, and then onto the back of the heater. Use the provided wing nuts to secure the wall brackets and heater brackets together at an angle best suited for your area.
Plug the heater into your mains, or get a qualified electrician to hardwire it for you.
Infrared heaters use up to 60% less energy than electric convection heaters, because they warm up objects rather than the air.
As they have no moving parts, they require zero maintenance.
At just 22mm thick, and best installed at head height, they can save massive amounts of space, allowing you to use your entire floor space.
Our infrared panels are far better looking than conventional radiators, giving your home a more modern look.
Once they have reached the end of their huge 100,000 hour lifespan, they almost fully recyclable, further helping the environment even after they’re no longer fit for use.
|Surface Material||Premium FIR Coating|
|Dimensions (mm)||995mm x 595mm x 22mm|
|IP Rating||IP54 - Protected against splashes of water|
|Warranty||2 Years Upgradable to 5 Years|
|Product Features||Built in Thermostat with Remote Control|
|Requirements||Eco Design Requirements for Electric Local Space Heaters|