If you’d like to revolutionise how you heat your home, warehouse or office, then an infrared heater is the perfect place to start. Infrared heating has lots of advantages over traditional heating methods, including their incredible eco-friendliness. This Mirrorstone panel measures 595mm by 995mm, and has a 580W heater. This means that it can heat an area of roughly 9-10m2. It has a slim 22mm depth, so can be installed flush against your wall.
This panel is made using tough FIR Coating materials. The surface can reach a temperature of between 75 and 95˚C. This is similar to a normal radiator, but can of course be installed higher up on the wall, where you’re less likely to accidentally brush against it. It comes with an IP54 rating, meaning it is protected against splashes of water.
Infrared heating is an innovative new way to heat your room. It’s far more energy-efficient than other traditional heating systems, being able to save you around 60% on your heating bills! The way it does this is by heating your room in a completely different way. Instead of heating the air, as normal heaters do, infrared heaters heat the objects in the room. They do this by emitting infrared waves, which bounce off the objects, leaving them warmed. This is far more efficient.
This means that infrared heating doesn’t cause convectional currents. This is where the warmed air rises, cools, and falls again, requiring reheating. This can cause dust circulation, mould growth, and cold spots, all of which can negatively affect your health. Infrared heating, however, can benefit your health.
Infrared heating is also completely safe. Although it sounds scary, infrared heating uses the same kind of technology as your TV remote does – just on a grander scale. In fact, it’s the same type of heat that the sun provides – without any UV radiation!
Our infrared panels come with a brand new, highly advanced premium FIR Coating to help maximise the performance of your heater. It’s heat-resistant – meaning it can withstand temperatures up to 200oC without yellowing over time.
Not only that, but it will also help the carbon crystal heating element inside the panel distribute the IR waves better than ever before, thanks to a higher thermal efficiency, resulting in even more warmth in your home.
To top it all off, the coating is also far more secure than ever before, as it is fire resistant, ensuring your family and your home stay safe and warm.
Every single NXT Gen IR panel now come with a built-in thermostat, meaning they are compliant with the Lot 20 legislation that was brought in at the beginning of 2018. Along with the bundled remote control, you can fully control your heating straight away, and even allow some aspects to be automated.
The remote control is pretty impressive, as it can control a whole range of different features. It can also be paired to multiple heaters, if you wish to control them as a group.
The 7-day timer means you can customise when your heating is on or off on both weekdays and weekends. The remote control comes with a comprehensive one-year warranty, for your peace of mind.
That’s not all, though – the NXT Gen panels come with two more show-stopping features. The adaptive start function means that your panel can calculate how much earlier it needs to switch on, in order for your room to reach the intended temperature at the desired time. The open window detection feature switches your heater off if there’s a sudden temperature drop, as it’s uneconomical to run a heater in those conditions. With the excellent automatic temperature control, you can regulate your room’s temperature with ease. The panel will automatically turn on and off in order to keep your room at your intended temperature.
Take a look through our NXT Gen IR Panel manual for more information on how these panels will revolutionise your home’s heating.
These infrared panel heaters are very straightforward to install. You don’t have to call any professional plumbers, carpenters or electricians, as there’s just no need for that kind of work. In fact, you shouldn’t need any help at all, as it’s such a simple job.
We provide a useful stencil that shows you exactly how to mount these panels on the wall. Just drill the holes into the wall as it shows you, and set the screws in. After that, just hang the panel on the screws using the rear-mounted brackets.
The heaters are completely plug-and-play compatible, with a UK mains 3-pin plug and a 2m power cable. The panel can also be suspended from the ceiling, or be made portable when using an infrared heater stand.
Thanks to this panel’s slim 22mm depth, you can install it very close to your wall, so it’s well out of the way. They can be installed high up on the wall, which saves you plenty of space when compared to traditional space heaters. It means that you can have an attractive feature in your room instead.
This image panel has an amazingly high-quality picture on the front. The Natural Spring is an amazingly peaceful image, featuring a still body of water, surrounded by a rocky landscape. It has a mostly green, blue and grey palette, with the craggy grey of the rocks reflecting off of the water’s surface. It’s a brilliant way to disguise your heater as just a lovely picture on the wall.
We also have some similarly gorgeous images – the 595x995 Sand Dunes NXT Gen Infrared Heating Panel 580W is one of those. It features, unsurprisingly, some sandy dunes in the desert, with a dusky blue sky above. Across the sand are multiple paths of footprints.
The second lovely recommendation goes to the much colder-looking 595x995 Spring Morning NXT Gen Infrared Heating Panel 580W. It features similarly barren lands, albeit with a more wintery look. The field is full of a rolling fog, and in the foreground is a dead tree.
We supply this heater with an two-year warranty, to protect your purchase. Fill out a form now to extend this cover to five-years.
We also supply a 14-day home trial period, in case you wish to return or exchange your purchase. This is subject to a small 15% restocking fee, as this is a special order item.
All panels come with free delivery within 2-3 days, and next day delivery is available for £5.99.
You can return your panel if you are not happy with it within 14 days of receiving it.
To install your panel or bar heater, drill 4 holes into your wall as per the mounting template provided with your heater.
For panels, insert the wall plugs, followed by the screws, and use the cross-hair bolt insertion hole brackets on the back of the panel to mount it in place.
For bar heaters, use the provided screws to mount the brackets onto your wall, and then onto the back of the heater. Use the provided wing nuts to secure the wall brackets and heater brackets together at an angle best suited for your area.
Plug the heater into your mains, or get a qualified electrician to hardwire it for you.
Infrared heaters use up to 60% less energy than electric convection heaters, because they warm up objects rather than the air.
As they have no moving parts, they require zero maintenance.
At just 22mm thick, and best installed at head height, they can save massive amounts of space, allowing you to use your entire floor space.
Our infrared panels are far better looking than conventional radiators, giving your home a more modern look.
Once they have reached the end of their huge 100,000 hour lifespan, they almost fully recyclable, further helping the environment even after they’re no longer fit for use.
|Surface Material||Premium FIR Coating|
|Dimensions (mm)||995mm x 595mm x 22mm|
|IP Rating||IP54 - Protected against splashes of water|
|Warranty||2 Years Upgradable to 5 Years|
|Product Features||Built in Thermostat with Remote Control|
|Requirements||Eco Design Requirements for Electric Local Space Heaters|