14 Days Home Trial
5 Year Warranty*
Natural IR Heat
Simple Plug & Play
Vincent Van Gogh’s gorgeous representation of French olive trees is replicated fantastically for your enjoyment on this revolutionary infrared heater. IR heating is far better than other heating methods, with a whole host of different advantages for your home.
This specific panel heater measures approximately 595mm by 995mm, with a power output of 580W. This means it can heat an area that’s 9-10m2. It measures 22mm in depth, which allows it to fit extremely closely against your wall. With its IP54 rating, you need have no worries about installing it where it may be accidentally splashed with water.
The surface of the heater is constructed from top-quality FIR Coating, which is both sturdy and attractive. This can reach a maximum temperature of around 75-95˚C, which is slightly warmer than a traditional heater. This shouldn’t be an issue, however, as it can be installed further out of reach than a standard heater, minimising the likelihood of being burnt.
One of the very best things about infrared heating is how good it is for the environment, and how this translates into huge savings on your heating bills. Everyone loves saving money, and infrared heating can actually save you around a massive 60% on your heating bills! It does this is by warming the objects in the room, rather than just the air in the vicinity of the panel. The infrared waves that it emits bounce off of the objects in the room, leaving them warmed up.
This makes it more efficient, and also better for your health. That’s because traditional heaters form convectional currents, where the warmed air rises, cools, and then falls again, requiring more heat. This in turn can cause dust circulation, mould growth, and cold spots, which negatively affect your respiratory health.
IR heating is completely safe, so have no worries. It’s the same type of beam that your TV remotes emit, just on a larger scale. In fact, it’s just how the sun keeps us warm, too, except that the sun emits UV radiation, and our heaters do not.
Our infrared panels come with a brand new, highly advanced premium FIR Coating to help maximise the performance of your heater. It’s heat-resistant – meaning it can withstand temperatures up to 200oC without yellowing over time.
Not only that, but it will also help the carbon crystal heating element inside the panel distribute the IR waves better than ever before, thanks to a higher thermal efficiency, resulting in even more warmth in your home.
To top it all off, the coating is also far more secure than ever before, as it is fire resistant, ensuring your family and your home stay safe and warm.
Every single NXT Gen IR panel now come with a built-in thermostat, meaning they are compliant with the new for 2018 Lot 20 legislation. With the included remote control, you have complete control over a wide range of different features. It’s easy to use, and can be paired with multiple heaters, in order to control them as a group.
The 7-day timer means you can customise when your heating is on or off on both weekdays and weekends. Take a look through our NXT Gen IR Panel manual for more information on how these panels will revolutionise your home’s heating.
The remote control comes with a comprehensive one-year warranty, for your peace of mind.
Along with the bundled remote control, you can fully control your heating straight away, and even allow some aspects to be automated. With the excellent automatic temperature control, you can regulate your room’s temperature with ease. The panel will automatically turn on and off in order to keep your room at your intended temperature.
That’s not all, though – the NXT Gen panels come with two more show-stopping features. The adaptive start function means that your panel can calculate how much earlier it needs to switch on, in order for your room to reach the intended temperature at the desired time.
The open window detection feature switches your heater off if there’s a sudden temperature drop, as it’s uneconomical to run a heater in those conditions.
With such a slender 22mm depth, it’s easy to fit these panels very closely against your wall for a highly sleek look. They take up very little room when compared to standard radiators, which take up valuable floor space and just look cumbersome and in-the-way.
This image panel features a top-notch quality picture on the front of it. The Olive Trees with Yellow Sky and Sun was painted by Van Gogh in 1889. The vibrant oranges and yellows of the painting evoke the feeling of autumn fantastically. Disguising your heater in such a beautiful way means that you’ll get a completely discreet heater – indistinguishable from a picture on the wall.
We have a huge range of different images available here at Surya Heating.
If you’re into Vincent Van Gogh’s masterpieces, then you’re in luck. We have a few other options for you in that aspect, starting with the 595x995 The Starry Night NXT Gen Infrared Heating Panel 580W. A high quality replication of possibly his most famous artwork, you’ll be able to position this sumptuous artwork on your wall with ease.
Another piece of art from Van Gogh, the 595x995 Harvest In Provence NXT Gen Infrared Heating Panel 580W is another spectacular looking heater. It features the famous image, with its vibrant blues and yellows.
We supply a comprehensive two-year warranty, which can be extended to five-years, with every single one of our image panels, in the unlikely event that something goes wrong.
We also provide a 14-day home trial period, in case you wish to return or exchange the item. This is subject to a small 15% restocking fee, as this is a special order item.
All panels come with free delivery within 2-3 days, and next day delivery is available for £5.99.
You can return your panel if you are not happy with it within 14 days of receiving it.
To install your panel or bar heater, drill 4 holes into your wall as per the mounting template provided with your heater.
For panels, insert the wall plugs, followed by the screws, and use the cross-hair bolt insertion hole brackets on the back of the panel to mount it in place.
For bar heaters, use the provided screws to mount the brackets onto your wall, and then onto the back of the heater. Use the provided wing nuts to secure the wall brackets and heater brackets together at an angle best suited for your area.
Plug the heater into your mains, or get a qualified electrician to hardwire it for you.
Infrared heaters use up to 60% less energy than electric convection heaters, because they warm up objects rather than the air.
As they have no moving parts, they require zero maintenance.
At just 22mm thick, and best installed at head height, they can save massive amounts of space, allowing you to use your entire floor space.
Our infrared panels are far better looking than conventional radiators, giving your home a more modern look.
Once they have reached the end of their huge 100,000 hour lifespan, they almost fully recyclable, further helping the environment even after they’re no longer fit for use.
|Surface Material||Premium FIR Coating|
|Dimensions (mm)||995mm x 595mm x 22mm|
|IP Rating||IP54 - Protected against splashes of water|
|Warranty||2 Years Upgradable to 5 Years|
|Product Features||Built in Thermostat with Remote Control|
|Requirements||Eco Design Requirements for Electric Local Space Heaters|