Revolutionise the way you heat your home with one of our fantastic infrared heaters. They are energy-efficient, smart, and can save you lots of money. Infrared heating is perfect to supplement or replace your current heating system.
This infrared heating panel measures approximately 595mm by 995mm, with a 580W heater. This can heat an area of around 9-10m2. It measures just 22mm in depth, meaning it can fit extremely flush to the wall.
The panel is made from resiliently attractive FIR Coating materials, which can reach a surface temperature of around 75-95˚C. This is the same as a standard radiator, but of course, these can be installed higher up on the wall. This means that they are unlikely to be accidentally touched. It comes with an IP54 rating, to protect it against splashes of water.
Infrared heating is a new way of heating your home that is far more eco-friendly than other heating methods. It uses much less energy than other heaters, and can save you around 60% on your heating bills! The way it does this is by heating objects in the room, rather than the air around it. It uses infrared beams, which are fired around the room, bouncing off of the objects. This leaves them warmed.
Infrared heating therefore doesn’t cause any warm air currents. This is where the warmed air rises, cools, and falls again, before requiring more heat. This is bad for your health, causing cold spots, mould growth, and dust circulation. Infrared heating is much better for your health, as it heats the actual objects, including you.
Infrared heating is absolutely safe, despite sounding scary. It uses the same sort of technology as your TV remote does. Whilst it provides the same heat as the sun, it does not emit any harmful UV radiation.
Our infrared panels come with a brand new, highly advanced premium FIR Coating to help maximise the performance of your heater. It’s heat-resistant – meaning it can withstand temperatures up to 200oC without yellowing over time.
Not only that, but it will also help the carbon crystal heating element inside the panel distribute the IR waves better than ever before, thanks to a higher thermal efficiency, resulting in even more warmth in your home.
To top it all off, the coating is also far more secure than ever before, as it is fire resistant, ensuring your family and your home stay safe and warm.
With our NXTGen IR Panels, you will get incredible functionality. They come with a built-in thermostat and remote control, which means they are all compliant with the new Lot 20 legislation. This means that these panels can be automatically controlled straight out of the box! It has a 7-day timer, which allows you to set different on/off times for weekdays and weekends.
The remote control uses radio frequency, which means that it can be paired with multiple heaters, to allow you to control them as a group. This can help make your home smarter and more efficient. Our NXT Gen IR Panel manual has full details of the functionality, and how this heater will genuinely improve your livelihood.
The remote control is covered by an extensive one-year manufacturer’s warranty.
Automated temperature control allows you to set the desired temperature for your room, and let the panel does the work. It turns on and off to make sure that your room stays at the temperature you’re after.
Where the panel truly works its magic is through the adaptive start and open window detection. Adaptive start means that your panel uses its brain to work out when to switch on to make sure that your room is at your desired temperature at your desired time. This means no more random guesswork for you. The open window detection means that if there’s a sudden temperature drop, like when you open a window, the panel will switch off, to save you energy.
These heaters are very straightforward to install. There’s no tricky plumbing or electrical work, so you don’t have to worry about getting hold of any professional help. In fact, you won’t need any help at all, as it’s just a one-person job, really. We provide a helpful stencil with every panel, that shows you just how to mount it on the wall. Just drill the two holes into the wall, and put the screws in. Once you’ve done that, just hang the panel onto the screws using the rear-mounted brackets.
It’s completely plug-and-play compatible, with a UK mains 3-pin plug and 2m power cable included. It can also be either suspended from the ceiling, or made to be portable with an infrared heater stand.
Measuring just 22mm in depth, these panels fit very flush against the wall. They can be installed much higher up on the wall, when compared to normal radiators or portable heaters. This means that your heater can be an actual attractive feature of the room, rather than a bulky eyesore.
This particular image panel features a greyscale image of a white flower on the end of a branch. In the middle of this is a bright yellow bee, rendered in colour. This therefore contrasts the rest of the image, and focuses your attention onto the bee. It’s a brilliant way to completely disguise your heater. The canvas-like appearance is the ultimate discreet heating solution.
If you’re looking for a completely different image, check out the gorgeous 595x995 Maldives Twilight NXT Gen Infrared Heating Panel 580W. It has an image of a small boat on a body of water, with an incredible pink and purple sky reflecting off of the water to create a beautiful atmosphere.
This next image is a lovely bright one. The 595x995 Sydney NXT Gen Infrared Heating Panel 580W depicts the Sydney Opera House, with a backdrop of a stunningly blue sky. To the foreground is the beautiful azure ocean.
All of our image panels come with a extendable two-year warranty, so your purchase will be protected. We also provide a brilliant 14-day home trial period, in case you wish to return or exchange the item. This would be subject to a small 15% restocking fee, however, as the image would need to be printed onto the panel.
All panels come with free delivery within 2-3 days, and next day delivery is available for £5.99.
You can return your panel if you are not happy with it within 14 days of receiving it.
To install your panel or bar heater, drill 4 holes into your wall as per the mounting template provided with your heater.
For panels, insert the wall plugs, followed by the screws, and use the cross-hair bolt insertion hole brackets on the back of the panel to mount it in place.
For bar heaters, use the provided screws to mount the brackets onto your wall, and then onto the back of the heater. Use the provided wing nuts to secure the wall brackets and heater brackets together at an angle best suited for your area.
Plug the heater into your mains, or get a qualified electrician to hardwire it for you.
Infrared heaters use up to 60% less energy than electric convection heaters, because they warm up objects rather than the air.
As they have no moving parts, they require zero maintenance.
At just 22mm thick, and best installed at head height, they can save massive amounts of space, allowing you to use your entire floor space.
Our infrared panels are far better looking than conventional radiators, giving your home a more modern look.
Once they have reached the end of their huge 100,000 hour lifespan, they almost fully recyclable, further helping the environment even after they’re no longer fit for use.
|Surface Material||Premium FIR Coating|
|Dimensions (mm)||995mm x 595mm x 22mm|
|IP Rating||IP54 - Protected against splashes of water|
|Warranty||2 Years Upgradable to 5 Years|
|Product Features||Built in Thermostat with Remote Control|
|Requirements||Eco Design Requirements for Electric Local Space Heaters|