Natural IR Heat
Hurry Now! 10% Off All Heaters! Use Code: SUPER10
In the midst of the sea with land close by, a sailboat passes by, gently rocking with the swaying water, with a completely clear blue sky overhead and the sun’s rays beaming down.
Speaking of the sun’s rays, our panel will emit infrared waves from its 595 x 995mm FIR Coating surface just like the sun, so that it can keep your room nice and warm. It’ll consume 580W in the process, and reach temperatures as high as 95oC, though this is offset by the fact that it can be mounted high up on walls or on your ceiling, and therefore out of reach.
It’ll look far better than conventional radiators once it’s mounted too. This is mainly due to the image printed on the panel, a thickness of just 22mm, and a choice of white, silver or black frames that allow you to match it to your décor.
A trip over to our discount codes page could even save you a massive amount off your order total, so head on over and see how much you could save!
With one of our NXT Gen IR Panels, you will get some incredible functionality. They come with a built-in thermostat and remote control, which means they are all compliant with the new Lot 20 legislation. This means that these panels can be automatically controlled straight out of the box!
Automated temperature control allows you to set the desired temperature for your room, and let the panel does the work. It turns on and off to make sure that your room stays at the temperature you’re after. It has a 7-day timer, too, that allows you to set different on/off times for weekdays and weekends.
Where the panel truly works its magic is through the adaptive start and open window detection. Adaptive start means that your panel uses its brain to work out when to switch on to make sure that your room is at your desired temperature at your desired time. This means no more random guesswork for you. The open window detection means that if there’s a sudden temperature drop, like when you open a window, the panel will switch off, to save you energy.
Our NXT Gen IR Panel manual has full details of the functionality, and how this heater will genuinely improve your livelihood.
The remote control is covered by an extensive one-year manufacturer’s warranty.
Our infrared panels come with a brand new, highly advanced premium FIR Coating to help maximise the performance of your heater. It’s heat-resistant – meaning it can withstand temperatures up to 200oC without yellowing over time.
Not only that, but it will also help the carbon crystal heating element inside the panel distribute the IR waves better than ever before, thanks to a higher thermal efficiency, resulting in even more warmth in your home.
To top it all off, the coating is also far more secure than ever before, as it is fire resistant, ensuring your family and your home stay safe and warm.
We’ve got loads of other photos to choose from in our range of 595 x 995 image IR heating panels, like our 595 x 995 Red Arrows Printed Infrared Heating Panel 580W. It emits the same amount of heat as our featured Sailboat panel, but features the amazing Red Arrows flying through the air.
For smaller areas of the home, your taste might launch you towards a completely different style – like our 595 x 595 Shuttle Printed Infrared Heater 350W. A trip to space is the order of the day here, with tonnes of burnt rocket fuel being left in its wake.
Our 595 x 1195 Milky Way Printed Infrared PanelHeater 700W provides a glimpse of where the shuttle from the previous panel might end up, as well as providing a better solution for slightly larger rooms! Beyond the cliff face lies the vast expanse of stars that make up our Milky Way galaxy.
If you’re struggling to decide on an image, then why not take things into your own hands by opting for one of our custom image IR heaters – you can choose you own photo and we’ll put it onto a panel for you! You’re only limited by your imagination, and best of all it’ll be ready for you within 7 days – faster than any other IR Panel retailer in the UK!
Working out how many panels you need is actually an easy process – all you need is a tape measure, calculator, and some knowledge about how well insulated your property is.
The first step is to measure your room in metres. You’ll need the length, width and height. Then using your calculator, you’ll need to multiply these three figures together, which will give you the volume in cubic metres.
Then, the level of insulation your home has will determine how much heat you need. Poorly insulated homes need 30W per cubic metre, moderately insulated homes need 25W per cubic metre, whilst well insulated homes need just 20W per cubic metre.
Multiplying the volume of your room by the recommended wattage per cubic metre will give you the total wattage requirement, and from here, you can begin to decide which panels you want.
For example, if your total wattage requirement for your room is 2000W, then a 1200W panel and a 700W panel would be sufficient.
Our 605 x 1005 Sailboat Printed Infrared Heating Panel 580W is covered by our 14 day home trial period, during which you can request a full refund or exchange and send you panel back to us.
Please note however that this panel is subject to a 15% restocking fee should it need to be returned.
You’re also covered by Mirrorstone’s extendable 2 year replacement warranty should you have any unlikely issues further down the line.
Please give us a call on 0116 321 4124, or send us an email to firstname.lastname@example.org if you have any further questions about this panel, the wider range of panels that we have, why you should become a trade customer, or anything else.
All panels come with free delivery within 2-3 days, and next day delivery is available for £5.99.
You can return your panel if you are not happy with it within 14 days of receiving it.
To install your panel or bar heater, drill 4 holes into your wall as per the mounting template provided with your heater.
For panels, insert the wall plugs, followed by the screws, and use the cross-hair bolt insertion hole brackets on the back of the panel to mount it in place.
For bar heaters, use the provided screws to mount the brackets onto your wall, and then onto the back of the heater. Use the provided wing nuts to secure the wall brackets and heater brackets together at an angle best suited for your area.
Plug the heater into your mains, or get a qualified electrician to hardwire it for you.
Infrared heaters use up to 60% less energy than electric convection heaters, because they warm up objects rather than the air.
As they have no moving parts, they require zero maintenance.
At just 22mm thick, and best installed at head height, they can save massive amounts of space, allowing you to use your entire floor space.
Our infrared panels are far better looking than conventional radiators, giving your home a more modern look.
Once they have reached the end of their huge 100,000 hour lifespan, they almost fully recyclable, further helping the environment even after they’re no longer fit for use.
|Surface Material||Premium FIR Coating|
|Dimensions (mm)||995mm x 595mm x 22mm|
|IP Rating||IP54 - Protected against splashes of water|
|Warranty||2 Years Upgradable to 5 Years|
|Product Features||Built in Thermostat with Remote Control|
|Requirements||Eco Design Requirements for Electric Local Space Heaters|