Natural IR Heat
Hurry Now! 10% Off All Heaters! Use Code: SUPER10
If you want to improve or replace your current heating system, then infrared heating is the perfect way to do it. It has loads of different advantages when compared to traditional heating methods, including central heating.
This Mirrorstone panel measures approximately 595mm by 995mm, and has a wattage of 580W. This means that it can heat an area of roughly 9-10m2. It has a depth of just 22mm, meaning it can be installed flush to your wall. It comes with an IP54 rating, which means it is protected against splashes of water.
The panel heater is made from premium FIR Coating materials, which are built to last and look good. The surface temperature can reach around 75-95˚C, which is similar to a traditional radiator. Of course, infrared heaters can be installed much higher up on the wall, negating the possibility of it being accidentally touched.
Infrared heating is extremely environmentally friendly, using much less energy than other heating methods. This can save you lots of money – around 60% on your heating bills, every single month. It does this by heating your room completely differently. It emits infrared beams, which bounce off of the objects in your room, leaving them warmed. A normal heater just heats the air around it.
Infrared heating therefore doesn’t cause convectional currents. This is where the warm air rises, cools, and then falls again, requiring reheating. This is much more inefficient, and can cause problems. These include cold spots, mould growth, and dust circulation. Infrared doesn’t cause any of these, which is why it’s seen as being better for your health.
Infrared heating is completely safe, as it’s just the same kind of energy that’s emitted by your TV remote. It also provides the same heat that the sun does, although it emits absolutely no UV radiation.
Our infrared panels come with a brand new, highly advanced premium FIR Coating to help maximise the performance of your heater. It’s heat-resistant – meaning it can withstand temperatures up to 200oC without yellowing over time.
Not only that, but it will also help the carbon crystal heating element inside the panel distribute the IR waves better than ever before, thanks to a higher thermal efficiency, resulting in even more warmth in your home.
To top it all off, the coating is also far more secure than ever before, as it is fire resistant, ensuring your family and your home stay safe and warm.
With one of our NXT Gen IR panels, you will get a futuristic heating solution. They come with a built-in thermostat and remote control, which means they follow the Lot 20 legislature. This means you can have control over so many different aspects of your heating straight away.
You can make use of the automatic temperature control, which automatically switches the panel on and off in order to regulate your desired temperature. There’s also a 7-day timer that allows you to set different on and off times for weekdays and weekends.
If you have a look at our NXT Gen IR Panel manual, you can see the full details of the wonderful functionality. The remote control is covered by a 1-year manufacturer’s warranty.
Where the panel truly shines, however, is through the fantastic adaptive start and open window detection features. With adaptive start, your panel will calculate what time it needs to come in order to get your room to the desired temperature at the desired time. The 7-day timer means you can set different on/off times for weekdays and weekends.
The NXT Gen panel really comes into its own with the adaptive start and open window detection. With adaptive start, the panel will work out how far in advance it’ll need to switch on in order to reach the desired temperature at the desired time, eliminating any guesswork on your behalf. The open window detection saves valuable energy, as if there’s a sudden temperature drop, it switches off.
These panels are so easy to install, so there’s no need for you to panic. You won’t have to worry about paying anyone to help, whether they’re a plumber, electrician, or carpenter. It’s a complete and utter one-person job. Just use the included stencil, which shows you exactly where to drill the holes into the wall. After that, just put the screws in the wall, and hang the panel onto them. This is easy to do, using the rear-mounted brackets.
Measuring just 22mm in depth, these panels can fit extremely flush against your wall. They can be installed much higher up than a traditional heater, too, as you don’t have to worry about any warm air currents. This means that your heater won’t just be an ugly necessity, but a truly beautiful aesthetic feature.
The Spring Morning is a beautiful picture. It does exactly what it says on the tin, with a field obscured by a thick mist. To the left, clear of mist, are a couple of barren trees, standing tall in a frozen field. A gorgeous image panel is the perfect way to disguise your heating, creating a discreet heating solution.
Continuing the colder theme, the 595x995 Arctic Lake NXT Gen Infrared Heating Panel 580W takes it a little bit further. It depicts a mountain range towards the background, with a large lake in front of it. This reflects he blue and white colour of the mountains, creating a truly chilly look.
This panel comes with a comprehensive two-year warranty, such is our confidence in the product. We also provide a 14-day home trial period, during which you can replace or return the product. This is subject to a small 15% restocking fee, as this the panel will have been printed on.
All panels come with free delivery within 2-3 days, and next day delivery is available for £5.99.
You can return your panel if you are not happy with it within 14 days of receiving it.
To install your panel or bar heater, drill 4 holes into your wall as per the mounting template provided with your heater.
For panels, insert the wall plugs, followed by the screws, and use the cross-hair bolt insertion hole brackets on the back of the panel to mount it in place.
For bar heaters, use the provided screws to mount the brackets onto your wall, and then onto the back of the heater. Use the provided wing nuts to secure the wall brackets and heater brackets together at an angle best suited for your area.
Plug the heater into your mains, or get a qualified electrician to hardwire it for you.
Infrared heaters use up to 60% less energy than electric convection heaters, because they warm up objects rather than the air.
As they have no moving parts, they require zero maintenance.
At just 22mm thick, and best installed at head height, they can save massive amounts of space, allowing you to use your entire floor space.
Our infrared panels are far better looking than conventional radiators, giving your home a more modern look.
Once they have reached the end of their huge 100,000 hour lifespan, they almost fully recyclable, further helping the environment even after they’re no longer fit for use.
|Surface Material||Premium FIR Coating|
|Dimensions (mm)||995mm x 595mm x 22mm|
|IP Rating||IP54 - Protected against splashes of water|
|Warranty||2 Years Upgradable to 5 Years|
|Product Features||Built in Thermostat with Remote Control|
|Requirements||Eco Design Requirements for Electric Local Space Heaters|