With an infrared heating panel, you’re well set to get the very best in heating. They’re smart, efficient, and can save you money. This particular panel measures 595mm by 995mm, and with its power of 580W, will heat an area of roughly 9-10m2. It has a depth of just 22mm, meaning it’ll fit very snugly against your wall.
The panel is made from sturdy yet attractive FIR Coating, which can reach a maximum surface temperature of 75-95˚C. This is similar to a standard radiator, but this can of course be installed higher up the wall, negating the risk of accidental touching. It comes with an IP54 rating, which protects it against splashes of water.
One of the best things about infrared heating is just how environmentally friendly it is. Because it uses much less energy than other heating methods, it can lower your heating bills by a whopping 60%! It’s all down to how it heats your room. It uses infrared waves, which bounce around the room, hitting objects and moving on again. It leaves them warmed, which is more efficient than just heating the air around it, like normal heaters do.
Infrared heating therefore doesn’t cause convectional currents. This is where the warm air rises, cools, and falls again, requiring heating again. This is extremely inefficient, and can be bad for your respiratory health. This is because these currents cause cold spots, dust circulation, and mould growth. Infrared heating doesn’t do this, which is why it is much better for your health.
Infrared heating is completely safe, even though infrared radiation sounds scary. It’s the same heat that the sun provides, but without any harmful radiation. It’s the same beams that are emitted by your TV remote control!
Our infrared panels come with a brand new, highly advanced premium FIR Coating to help maximise the performance of your heater. It’s heat-resistant – meaning it can withstand temperatures up to 200oC without yellowing over time.
Not only that, but it will also help the carbon crystal heating element inside the panel distribute the IR waves better than ever before, thanks to a higher thermal efficiency, resulting in even more warmth in your home.
To top it all off, the coating is also far more secure than ever before, as it is fire resistant, ensuring your family and your home stay safe and warm.
When you purchase any of our NXT Gen IR Panels, you’ll benefit from the added convenience of the integrated thermostat and remote control bundled with every heater. This is to ensure 100% compliance with the Lot 20 legislation that came into effect at the beginning of 2018.
The remote control can be paired with multiple heaters, to control them as a group. The 7-day timer gives you further control by letting you set on/off times for the weekdays and weekends. Our NXT Gen IR Heater manual tells you everything you need to know about the functionality of the range.
Please bear in mind that the remote control comes with a 1-year manufacturer’s warranty, giving you peace of mind in the longer term.
This means you benefit from all sorts of new features, starting with automated temperature control. You simply set your temperature and the panel will maintain the warmth by switching on and off. Where the panel automates things for you is with adaptive start. The panel works out how early it needs to switch on in order for your room to be at your desired temperature at the time you need it. This means you don’t need to guess – it does all the hard work for you!
Open window detection automatically shuts the heater off when there is a sudden drop in temperature, as attempting to heat a room with a cold draft is highly inefficient.
These heaters are very simple to install. You don’t have to worry about any complicated work –plumbers, carpenters, and electricians will not be needed at all. It’s a one-person job, which should take just a few minutes of your time. Using the helpful stencil that’s provided in the box, drill the two holes into the wall. Then, just put the screws in, and hang the panel onto them using the rear-mounted brackets. That’s all there is to it!
These panels are very slim, which makes them great candidates for fitting so close to your wall. They can be installed much further up than traditional radiators, as they don’t have to worry about the heat all rising to the ceiling. This means it can be part of your home’s décor, rather than a waste of space.
It has a lovely picture on it as part of its design, too. The Swiss Chalet depicts a lonely house in the middle of the woods, with a calm lake to the foreground. In the background of the house is a towering mountain, with plenty of snow covering it. With a gorgeous image like this, it’s easy to disguise your heating as something you wouldn’t suspect.
If you’re looking for something breath-taking, check out the amazing 595x995 Thunderstorm NXT Gen Infrared Heating Panel 580W. It shows a major city skyline, illuminated at night, with a shockingly large lightning bolt streaking across the sky above.
Another lovely image for your heater is the rather introspective 595x995 Water Pebbles NXT Gen Infrared Heating Panel 580W. It features a pile of pebbles balanced on top of each other, in the middle of a body of water. In the background is an out of focus forest area, giving a very calm image.
This panel heater comes with an extendable two-year warranty, to protect your purchase.
We also provide a 14-day home trial period, during which you can return or exchange it. As the panel has to be printed, this is subject to a small 15% restocking fee.
If you have any questions about infrared heating, then don’t be afraid to get in touch. Call us on 0116 321 4124, email us at email@example.com, or check out our Facebook, Instagram and Twitter pages.
All panels come with free delivery within 2-3 days, and next day delivery is available for £5.99.
You can return your panel if you are not happy with it within 14 days of receiving it.
To install your panel or bar heater, drill 4 holes into your wall as per the mounting template provided with your heater.
For panels, insert the wall plugs, followed by the screws, and use the cross-hair bolt insertion hole brackets on the back of the panel to mount it in place.
For bar heaters, use the provided screws to mount the brackets onto your wall, and then onto the back of the heater. Use the provided wing nuts to secure the wall brackets and heater brackets together at an angle best suited for your area.
Plug the heater into your mains, or get a qualified electrician to hardwire it for you.
Infrared heaters use up to 60% less energy than electric convection heaters, because they warm up objects rather than the air.
As they have no moving parts, they require zero maintenance.
At just 22mm thick, and best installed at head height, they can save massive amounts of space, allowing you to use your entire floor space.
Our infrared panels are far better looking than conventional radiators, giving your home a more modern look.
Once they have reached the end of their huge 100,000 hour lifespan, they almost fully recyclable, further helping the environment even after they’re no longer fit for use.
|Surface Material||Premium FIR Coating|
|Dimensions (mm)||995mm x 595mm x 22mm|
|IP Rating||IP54 - Protected against splashes of water|
|Warranty||2 Years Upgradable to 5 Years|
|Product Features||Built in Thermostat with Remote Control|
|Requirements||Eco Design Requirements for Electric Local Space Heaters|