Natural IR Heat
Hurry Now! 10% Off All Heaters! Use Code: SUPER10
G’Day mate, and welcome to a fantastic new infrared heating panel. This is a top koala-ty heater that has many advantages when compared to other heating methods. It’s efficient, cost-friendly, and smart, too.
This heater measures 595mm by 995mm, and with its power output of 580W, can heat an area that’s approximately 9-10m2. With a slender depth of just 22mm, this could easily fit against your wall with very little protrusion into your personal space. It comes with an IP54 rating, which protects it against accidental splashes of water, perhaps in the kitchen or bathroom.
The panel is manufactured from fantastic FIR Coating materials, which are built to be tough and to look superb. The surface temperature can reach a high of around 75-95˚C, which is only slightly warmer than a standard radiator. As infrared heaters can be installed much higher up on the wall, they’re unlikely to be unintentionally touched.
Infrared heating is a brand new, innovative way of heating your home, office or warehouse, with a plethora of fantastic advantages compared to other heating methods. It’s superb for the environment, and can save you a lot of cash. In fact, simply by warming the objects in your room, instead of the air around it, infrared heating can save you approximately 60% on your heating bills! It produces infrared beams, which reflect off of the objects in your room, leaving them warmed thoroughly.
A conventional heater conversely causes convectional currents. The warm air rises, cools, and falls again, which leads to dust circulation, mould growth, and cold spots. This is how infrared heating is better for your health.
Infrared heating is also completely safe, despite the thought of radiation sounding a little bit scary. Infrared is just on the electromagnetic spectrum, the same as x-rays, radio waves, and visible light. However, just like visible light, there are no negative effects with infrared waves. Infrared beams are used by TV remotes, and it’s how the sun warms us, too!
Our infrared panels come with a brand new, highly advanced premium FIR Coating to help maximise the performance of your heater. It’s heat-resistant – meaning it can withstand temperatures up to 200oC without yellowing over time.
Not only that, but it will also help the carbon crystal heating element inside the panel distribute the IR waves better than ever before, thanks to a higher thermal efficiency, resulting in even more warmth in your home.
To top it all off, the coating is also far more secure than ever before, as it is fire resistant, ensuring your family and your home stay safe and warm.
Included with every NXT Gen IR Panel is a built-in thermostat at the back of the panel, and a remote control in the box. This is to ensure that our heaters are all Lot 20 compliant, and are as energy efficient as possible.
You also get a 7-day timer, too, which means you can customise the on and off times for both weekends and weekdays. You can take a look at our NXT Gen IR Panel manual for full details on how it works, and find out how our revolutionary IR heaters are set to change the market one more time.
For added peace of mind, the remote comes with a 12 month replacement warranty.
You get automated temperature control with this panel, which means you can set your desired temperature, and the heater will automatically switch on and off in order to keep to this temperature.
Adaptive start though is where things get clever. When activated, your panel can calculate how long it takes to bring your room up to temperature at the time you want, and switch on early to ensure your room is just right when you need it. Finally, open window technology means your panel knows when the window has been opened, and will switch off to save energy. This is because it’s inefficient to try and heat a room that’s also being cooled. How clever is that?
Installation of these panels is ridiculously easy. There are no complicated instructions to follow, and no difficult work to actually enact. Forget about the plumbers and electricians of the world, as they’re simply not needed. This is a one-person job, so you won’t even have to bother trying to convince any extra help.
Simply use the stencil that’s provided in the box that shows you exactly where to drill the holes in the wall, then slip the screws in. After that, mount the panel onto the screws, using the two brackets on the rear.
The panel is completely plug-and-play compatible, thanks to the 2m long power cable and UK mains 3-pin plug. It can also be suspended from the ceiling, or made to be portable, using the infrared heater stand.
All of our image panels are supplied with an extendable two-year warranty, so your product will be fully protected.
We also give you a 14-day home trial period, during which you can return or exchange the item. However, this is subject to a small 15% restocking fee, as the panel would of course need to be printed on.
All panels come with free delivery within 2-3 days, and next day delivery is available for £5.99.
You can return your panel if you are not happy with it within 14 days of receiving it.
To install your panel or bar heater, drill 4 holes into your wall as per the mounting template provided with your heater.
For panels, insert the wall plugs, followed by the screws, and use the cross-hair bolt insertion hole brackets on the back of the panel to mount it in place.
For bar heaters, use the provided screws to mount the brackets onto your wall, and then onto the back of the heater. Use the provided wing nuts to secure the wall brackets and heater brackets together at an angle best suited for your area.
Plug the heater into your mains, or get a qualified electrician to hardwire it for you.
Infrared heaters use up to 60% less energy than electric convection heaters, because they warm up objects rather than the air.
As they have no moving parts, they require zero maintenance.
At just 22mm thick, and best installed at head height, they can save massive amounts of space, allowing you to use your entire floor space.
Our infrared panels are far better looking than conventional radiators, giving your home a more modern look.
Once they have reached the end of their huge 100,000 hour lifespan, they almost fully recyclable, further helping the environment even after they’re no longer fit for use.
|Surface Material||Premium FIR Coating|
|Dimensions (mm)||995mm x 595mm x 22mm|
|IP Rating||IP54 - Protected against splashes of water|
|Warranty||2 Years Upgradable to 5 Years|
|Product Features||Built in Thermostat with Remote Control|
|Requirements||Eco Design Requirements for Electric Local Space Heaters|