Add some extra heat to your home, and improve your interior design at the same time. That’s what one of these beautiful infrared heaters will do – look amazing, and provide smart, efficient heat that can save you money.
This panel measures approximately 595mm by 995mm, and has a power output of 580W. This means that it can heat an area of roughly 9-10m2. Measuring just 22mm in depth means that it can fit very neatly against your wall. It comes with an IP54 rating, which means it can be installed in your kitchen or bathroom. That’s because it is protected against splashes of water.
The surface of the heater is built using strong FIR Coating, which can reach a maximum temperature of between 75 and 95˚C. This isn’t too hot, being about the same as a normal radiator. You won’t need to worry about accidentally burning yourself on it, however, as it can be installed much higher up on the wall than a standard radiator, negating this risk.
Infrared heating is a brand new, innovative way of heating your home, office or warehouse, with loads of different advantages over other heating methods. It’s fantastic for the environment, and can save you a tonne of cash. In fact, by heating the objects in your room, instead of the air around it, infrared heating can save you approximately 60% on your heating bills! It generates infrared waves, which bounce off of the objects in your room, leaving them warmed.
Standard heaters therefore cause convectional currents, as they heat the air. This is where the warmed air rises to the ceiling, cools, and falls again, requiring more heat. This is both inefficient, and undesirable for your health. That’s because they can cause dust circulation, mould growth, and cold spots around your room. This is why infrared heating is better for your overall health.
Infrared heating is also completely safe, as scary as it sounds. It uses the same kind of technology as your TV remote. The heat it provides is actually the same as the sun’s! There’s no nasty UV radiation with an infrared heater, however – just clean, efficient heat.
Our infrared panels come with a brand new, highly advanced premium FIR Coating to help maximise the performance of your heater. It’s heat-resistant – meaning it can withstand temperatures up to 200oC without yellowing over time.
Not only that, but it will also help the carbon crystal heating element inside the panel distribute the IR waves better than ever before, thanks to a higher thermal efficiency, resulting in even more warmth in your home.
To top it all off, the coating is also far more secure than ever before, as it is fire resistant, ensuring your family and your home stay safe and warm.
Included with every NXT Gen IR Panel is a built-in thermostat at the back of the panel, and a remote control in the box. This is to ensure that our heaters are all Lot 20 compliant, and are as energy efficient as possible. The remote control can actually be paired with multiple heaters, in case you wish to operate them as a different group or zone.
You can also set what time you want it to switch on and off on weekdays and weekends using the 7-day timer, so your lie-ins can be even better for you.
For added peace of mind, the remote comes with a 12 month replacement warranty.
With automatic temperature control, your panel can automatically regulate the temperature in your room by switching it on and off.
Adaptive start though is where things get clever. When activated, your panel can calculate how long it takes to bring your room up to temperature at the time you want, and switch on early to ensure your room is just right when you need it. Finally, open window technology means your panel knows when the window has been opened, and will switch off to save energy. How clever is that?
You can take a look at our NXT Gen IR Panel manual for full details on how it works, and find out how our revolutionary IR heaters are set to change the market one more time.
With an abundance of fantastic NXTGEN features on offer with your new infrared panel, it could potentially be considered tricky to see exactly what it’s doing just by giving it a quick look. However, you don’t need to worry, as we have made your lives much, much easier. With our incredible little blue LED light, you can just have a fleeting peek and know the exact status of the heater.
When the panel is on and providing heat, the LED will be lit up. When the panel isn’t heating the room – maybe it’s during the night, or the desired temperature has been reached, then the light will turn itself off. It helps you to know just when it’s on or off so you know exactly what it’s up to.
We provide an amazing two-year warranty with our fantastic infrared panels, in the unlikely event anything goes wrong.
We also give you a brilliant 14-day home trial period, in case you wish to return or exchange the item. There is a small 15% restocking fee applicable, however, as this panel would’ve needed to be printed on.
All panels come with free delivery within 2-3 days, and next day delivery is available for £5.99.
You can return your panel if you are not happy with it within 14 days of receiving it.
To install your panel or bar heater, drill 4 holes into your wall as per the mounting template provided with your heater.
For panels, insert the wall plugs, followed by the screws, and use the cross-hair bolt insertion hole brackets on the back of the panel to mount it in place.
For bar heaters, use the provided screws to mount the brackets onto your wall, and then onto the back of the heater. Use the provided wing nuts to secure the wall brackets and heater brackets together at an angle best suited for your area.
Plug the heater into your mains, or get a qualified electrician to hardwire it for you.
Infrared heaters use up to 60% less energy than electric convection heaters, because they warm up objects rather than the air.
As they have no moving parts, they require zero maintenance.
At just 22mm thick, and best installed at head height, they can save massive amounts of space, allowing you to use your entire floor space.
Our infrared panels are far better looking than conventional radiators, giving your home a more modern look.
Once they have reached the end of their huge 100,000 hour lifespan, they almost fully recyclable, further helping the environment even after they’re no longer fit for use.
|Surface Material||Premium FIR Coating|
|Dimensions (mm)||995mm x 595mm x 22mm|
|IP Rating||IP54 - Protected against splashes of water|
|Warranty||2 Years Upgradable to 5 Years|
|Product Features||Built in Thermostat with Remote Control|
|Requirements||Eco Design Requirements for Electric Local Space Heaters|