Natural IR Heat
Hurry Now! 10% Off All Heaters! Use Code: TAKE10
With the gorgeous tropical scenery in this heater, you’ll get warmth coming in two different ways. This gorgeous picture is also an infrared heater, which is the best way to keep your home warm. IR heating is smart, eco-friendly, and can save you lots on your energy bills.
This heater measures approximately 595mm by 995mm, and has a power output of 580W. This means it can heat an area of around 9-10m2. It measures just 22mm in depth, which means it can be installed extremely closely against your wall. It comes with an IP54 rating, which means it is protected against splashes of water.
The surface is a tough but stylish FIR Coating, which can reach a temperature of approximately 75-95˚C. This is slightly warmer than a standard radiator, but is unlikely to burn you. That’s because you can avoid accidental touches by installing it higher up the wall than a normal radiator.
Infrared heating is a revolutionary new way of heating your home that is super-efficient, thanks to how it actually works. It uses infrared beams to heat the objects and surfaces in your room, rather than just warming the air around the room. This means that infrared heaters are very energy-efficient, as they use much less power than other heaters. This translates to huge savings – up to 60% on your heating bills!
Traditional heaters warm the air, which can be bad for your health. That’s because they form convectional currents, which is where the heat rises, cools, and falls again. This can promote dust circulation, mould growth, and cold spots. IR heating doesn’t do this, making them better for your health.
Infrared heating is absolutely 100% safe, despite it sounding a little scary. The waves it generates are similar to the infrared waves that your TV remote uses to control your TV. It’s also the same heat that the sun provides, although with no UV radiation whatsoever.
Our infrared panels come with a brand new, highly advanced premium FIR Coating to help maximise the performance of your heater. It’s heat-resistant – meaning it can withstand temperatures up to 200oC without yellowing over time.
Not only that, but it will also help the carbon crystal heating element inside the panel distribute the IR waves better than ever before, thanks to a higher thermal efficiency, resulting in even more warmth in your home.
To top it all off, the coating is also far more secure than ever before, as it is fire resistant, ensuring your family and your home stay safe and warm.
Every one of our NXT Gen IR panels now comes with a built-in thermostat and remote control, meaning that they all conform to the Lot 20 regulations. This means that you can have total automated control of your panels once you get them, with no hidden additional extras!
The amazing automated temperature control means that your panel will do the hard work for you. Just set the desired temperature and this heater will switch on and off automatically in order to regulate your room temperature. Plus, the seven-day timer means you can customise your heating times across a wide spectrum of all week.
The included remote comes with a comprehensive one-year warranty.
The real headline features are the adaptive start and open window detection. With adaptive start enabled, your IR heater will work out how long it’ll take to warm your room up to the desired temperature, then automatically switch on to ensure that your room warms up at the right time. This is perfect for those frosty mornings!
Open window detection means that if your panel detects a sudden drop in temperature – around 1.5˚C in 3 minutes – it will switch off, as attempting to continue heating is extremely inefficient.
Our NXT Gen IR Panel manual has full details of all the different features’ functionality, so take a look at the future of heating today!
These panels are so simple to install – so forget about getting any additional assistance in. You can do it all by yourself, so don’t worry about trying to find an electrician or plumber. The panels are completely plug-and-play compatible, so the only actual work you need to do is just get the panel on the wall.
All of our panels are supplied with a stencil in the box, to make your life even easier. Just draw through the holes on the stencil, and you’ll know where to drill into the wall. Just put the screws in the wall, and you’ll know what to hang the panel’s rear mounted brackets on. Once it’s on, just plug it in. It takes just a few minutes to complete.
Here’s another amazing suggestion for you – the 595x995 The Grand Canal NXT Gen Infrared Heating Panel 580W. It was originally painted by J.M.W. Turner, and has been painstakingly reproduced in high quality for this fantastic IR heater design.
If that doesn’t float your boat, take a look at the spectacular 595x995 Galloping Stallions NXT Gen Infrared Heating Panel 580W. It’s a greyscale image with two horses galloping through a swirl of dust.
Our panels are all provided with two-year warranties, which you can extend to five-years, so that your purchase is fully protected.
We also give you a 14-day home trial period, in case you need to return or exchange your item. However, as the panel needs to be printed on, there would be a small 15% restocking fee.
If you require any extra information, make sure you contact our customer services team. Call us on 0116 321 4124, email us at firstname.lastname@example.org, or visit us on our Facebook, Instagram, or Twitter.
All panels come with free delivery within 2-3 days, and next day delivery is available for £5.99.
You can return your panel if you are not happy with it within 14 days of receiving it.
To install your panel or bar heater, drill 4 holes into your wall as per the mounting template provided with your heater.
For panels, insert the wall plugs, followed by the screws, and use the cross-hair bolt insertion hole brackets on the back of the panel to mount it in place.
For bar heaters, use the provided screws to mount the brackets onto your wall, and then onto the back of the heater. Use the provided wing nuts to secure the wall brackets and heater brackets together at an angle best suited for your area.
Plug the heater into your mains, or get a qualified electrician to hardwire it for you.
Infrared heaters use up to 60% less energy than electric convection heaters, because they warm up objects rather than the air.
As they have no moving parts, they require zero maintenance.
At just 22mm thick, and best installed at head height, they can save massive amounts of space, allowing you to use your entire floor space.
Our infrared panels are far better looking than conventional radiators, giving your home a more modern look.
Once they have reached the end of their huge 100,000 hour lifespan, they almost fully recyclable, further helping the environment even after they’re no longer fit for use.
|Surface Material||Premium FIR Coating|
|Dimensions (mm)||995mm x 595mm x 22mm|
|IP Rating||IP54 - Protected against splashes of water|
|Warranty||2 Years Upgradable to 5 Years|
|Product Features||Built in Thermostat with Remote Control|
|Requirements||Eco Design Requirements for Electric Local Space Heaters|