Natural IR Heat
Hurry Now! 10% Off All Heaters! Use Code: BIG10
14 Days Home Trial
5 Year Warranty*
Natural IR Heat
10-14 Day Delivery
Complement your home’s newfound warmth with the attractiveness of the Japanese art that the Tsukada Island in The Mushashi provides. Teamed with amazing efficiency, cool NXTGEN features, and lots of savings on your heating bills, an IR heater is the ultimate in heating technology.
This panel measures 595mm by 995mm, and has a power usage of 580W. This means that it can heat an area that’s roughly 9-10m2. It measures just a slender 22mm in depth, so it’s easy to fit extremely closely to the wall. It has an IP54 rating, meaning it can be installed in bathrooms and kitchens with total confidence.
The panel’s surface is manufactured from premium FIR Coating, meaning it’s exquisite and robust. It can reach a maximum surface temperature of approximately 75-95˚C, which is only a little warmer than a standard radiator. This wouldn’t be a problem, of course, as it can be installed much further up your wall than other heaters can be.
Infrared heating is a ground-breaking new way to heat your interior or exterior. It’s extremely beneficial for the environment, as it uses much less energy than other traditional heating methods. Less energy used means you’ll be paying for much less energy – infrared heating can save you up to a whopping 60% on your heating bills. It does this by warming the actual objects in the room, rather than just the air immediately around the heater. The infrared beams it emits bounce off of objects, leaving them warmed.
A standard radiator therefore causes convectional currents. This is where the warm air rises, cools, and falls, ready to be reheated. Not only is this inefficient, constantly reheating the same air, it can also cause you respirator health problems. It promotes mould growth, cold spots, and dust circulation – all of which an infrared heater doesn’t cause. This makes infrared heating better for your health.
You will be happy to hear that infrared heating is completely safe, as it just uses the same sort of technology that TV remote controls use, or even laser quest games! Plus, the heat it provides is the same as the sun’s, but without any harmful ultraviolet radiation.
Our infrared panels come with a brand new, highly advanced premium FIR Coating to help maximise the performance of your heater. It’s heat-resistant – meaning it can withstand temperatures up to 200oC without yellowing over time.
Not only that, but it will also help the carbon crystal heating element inside the panel distribute the IR waves better than ever before, thanks to a higher thermal efficiency, resulting in even more warmth in your home.
To top it all off, the coating is also far more secure than ever before, as it is fire resistant, ensuring your family and your home stay safe and warm.
Changing the landscape of the heating industry once more, are our NXT Gen IR Panels. Inside each box there is a remote control, along with a built-in thermostat located at the back of the panel itself. This ensures full compliance with the Lot 20 legislation that came into effect in 2018.
Next up is the 7-day timer, that allows you to set your on and off times for the weekdays and weekends. If you want more information about the NXT Gen Heaters, you can take a look at our instruction manual.
The remote control can be paired with multiple heaters, in order to control them as a group. Every remote comes with a 12 month manufacturer’s warranty as standard.
What this means for you is a whole host of features that give you full control of your IR heater from day one, starting with automatic temperature control. You set your temperature, and your panel will switch on and off to regulate the levels of heat.
Adaptive start takes things up a notch. You set what time you want your room to be warm, and how warm you want it to be. The panel will then calculate how long it takes to bring the room up to temperature and switch on early! Lastly, open window technology switches your panel off when it detects that a window has been opened, increasing efficiency in the process.
These infrared heating panels are extremely simple to install, with straightforward instructions to follow that show you exactly how to do it. As the panels are fully plug-and-play compatible, you shouldn’t have any issues at all. If you wanted to, you could just take it out of the box and plug it straight in. However, to mount them onto the wall, you just have to use the stencil that’s provided. This shows you exactly where to drill the holes.
Slip the screws into the wall, then hang the panel onto the two brackets on the rear. It’s a very quick task for you, with no extra help necessary. It can also be suspended from the ceiling, or made portable using an infrared heater stand.
If you’re a fan of the Japanese art style, then take a look at some others from our artistic category. Go for the world-renowned design by Hokusai that is the 595x995 Great Wave off Kanagawa NXT Gen Infrared Heating Panel 580W. Featuring the famous wave, this is a high-quality replica.
If you want a taste of Western art, take a look at the 595x995 The Starry Night NXT Gen Infrared Heating Panel 580W. Featuring Van Gogh’s celebrated depiction of the French sky, this is a top-quality representation.
We provide a comprehensive two-year warranty with every one of our image panels, in the unlikely event that something goes wrong. We also provide a 14-day home trial period, in case you wish to return or exchange the item. This is subject to a small 15% restocking fee, as the panel would of course need to be printed on.
All panels come with free delivery within 2-3 days, and next day delivery is available for £5.99.
You can return your panel if you are not happy with it within 14 days of receiving it.
To install your panel or bar heater, drill 4 holes into your wall as per the mounting template provided with your heater.
For panels, insert the wall plugs, followed by the screws, and use the cross-hair bolt insertion hole brackets on the back of the panel to mount it in place.
For bar heaters, use the provided screws to mount the brackets onto your wall, and then onto the back of the heater. Use the provided wing nuts to secure the wall brackets and heater brackets together at an angle best suited for your area.
Plug the heater into your mains, or get a qualified electrician to hardwire it for you.
Infrared heaters use up to 60% less energy than electric convection heaters, because they warm up objects rather than the air.
As they have no moving parts, they require zero maintenance.
At just 22mm thick, and best installed at head height, they can save massive amounts of space, allowing you to use your entire floor space.
Our infrared panels are far better looking than conventional radiators, giving your home a more modern look.
Once they have reached the end of their huge 100,000 hour lifespan, they almost fully recyclable, further helping the environment even after they’re no longer fit for use.
|Surface Material||Premium FIR Coating|
|Dimensions (mm)||995mm x 595mm x 22mm|
|IP Rating||IP54 - Protected against splashes of water|
|Warranty||2 Years Upgradable to 5 Years|
|Product Features||Built in Thermostat with Remote Control|
|Requirements||Eco Design Requirements for Electric Local Space Heaters|