Natural IR Heat
Hurry Now! 10% Off All Heaters! Use Code: SUPER10
If you’re hoping to make some incredible enhancements to your heating system, then a brand new infrared heater is a brilliant place to start. They have loads of advantages over traditional heaters, such as standard central heating.
This Mirrorstone panel measures 595mm by 995mm, and has a heat power of 580W. This means that the area it can heat will be around 9-10 m2. It has a depth of just 22mm, meaning it’ll fit neatly against your wall, without ever looking as clunky and in-the-way as a normal radiator does. It has an IP rating of 54, meaning it can be installed in the bathroom or kitchen, as it’s protected against splashes of water.
It has an FIR Coating surface, which can reach a surface temperature of around 75-95˚C. This might sound hot, but it’s only a little warmer than a standard radiator. Plus, of course, an infrared panel can be installed much higher up the wall than a normal radiator, decreasing the likeliness of an accidental touch.
Infrared heating is a revolutionary new technology, so it’s understandable that many people are unaware of how it works. Plus, it works differently to other heaters, so it’s sometimes hard to get your head around it. It heats the actual objects in the room, with penetrating infrared waves, which help to create a thermal mass. This means that your room continues to stay warm after the heating is switched off. Infrared heating can save you 60% on your heating bills!
It does this by firing infrared beams around the room, which bounce off of the objects, leaving them warmed. This is in contrast to traditional heaters, which heat the air around themselves. Unfortunately, traditional heaters can be detrimental to your health because of this. Warm air forms a convectional current, where it rises to the ceiling, cools, and then falls again. This can promote dust circulation, mould and mildew growth, and cold spots. As infrared heating does not do this, it’s seen as better for your overall health and well-being.
Infrared heating is also safe, despite the term radiation sounding pretty dangerous. Infrared is just a type of light, such as visible light, ultraviolet, radio, and x-ray. Although x-rays and ultraviolet light can be harmful, infrared is not, whatsoever. Infrared heat is how the sun heats us, and infrared heating doesn’t produce UV as the sun does.
Our infrared panels come with a brand new, highly advanced premium FIR Coating to help maximise the performance of your heater. It’s heat-resistant – meaning it can withstand temperatures up to 200oC without yellowing over time.
Not only that, but it will also help the carbon crystal heating element inside the panel distribute the IR waves better than ever before, thanks to a higher thermal efficiency, resulting in even more warmth in your home.
To top it all off, the coating is also far more secure than ever before, as it is fire resistant, ensuring your family and your home stay safe and warm.
Every NXT Gen IR Panel now comes with an integrated thermostat, meaning they are compliant with the Lot 20 legislation that came into effect at the beginning of 2018. With the bundled remote control, you can now control every aspect of your heating straight out of the box. This remote control can be paired with multiple heaters, in order to control them as a group.
You get a 7-day timer that allows you to set separate on/off times for weekdays and weekends.
Our NXT Gen IR Panel manual has full details of the functionality, and how our range is going to change the heating market once more.
The remote control is covered by a 1-year manufacturer’s warranty.
You can make use of automatic temperature control, where your panel regulates whatever temperature you want by switching on and off. This is to make your panel even more efficient.
Where the panel really shines though is the adaptive start and open window detection. Adaptive start means your panel will work out how early it needs to switch on to bring your room up to temperature at your chosen time, and open window detection switches your panel off when there is a sudden drop in temperature as a result of an open window, saving you energy in the process. That’s so you’re not fighting against the elements, wasting lots of energy in the process.
This is a Mirrorstone product, so you’re getting a seriously high-quality build. The lovely glossy surface is simple to wipe clean with a damp cloth even with the image printed on it. That’s all the maintenance you’ll ever need, so forget about the yearly servicing that boilers require. There are no moving parts when it comes to an infrared panel, so there’s no upkeep needed whatsoever. The surface is made from sturdy FIR Coating too, so you’re all sorted.
You get all the standard electrical bits like a normal 240v junction box, a healthy 2 metres of heavy-duty flex cable and a typical UK mains 3-pin plug. If you wish to make your heater more convenient, you could always grab one of our brilliant infrared panel stands for a portable heating solution.
Take a look at the first of our amazing suggestions: the 595x995 Waterfalls NXT Gen Infrared Heating Panel 580W. It has a gorgeous image of a waterfall flowing downwards from a rocky ledge, with a rainforest surrounding it.
The second recommended image is the glorious 595x995 Sailboat NXT Gen Infrared Heating Panel 580W. The primary focus of this image is the grandiose sailboat in the middle of the photo, with a vibrant blue sky and sea. In the background is a rocky island.
We provide this infrared panel heater with a fantastic two-year warranty, which you can extend to five, in case something goes wrong.
We also provide a 14-day home trial period, in case you wish to return or exchange it. There would be a small 15% restocking fee, as this is a special order item.
If you need any extra help with this product, then we’ll be happy to assist you in any way. Give us a call on 0116 321 4124, email us at firstname.lastname@example.org, or visit us on Facebook, Twitter, and Instagram.
All panels come with free delivery within 2-3 days, and next day delivery is available for £5.99.
You can return your panel if you are not happy with it within 14 days of receiving it.
To install your panel or bar heater, drill 4 holes into your wall as per the mounting template provided with your heater.
For panels, insert the wall plugs, followed by the screws, and use the cross-hair bolt insertion hole brackets on the back of the panel to mount it in place.
For bar heaters, use the provided screws to mount the brackets onto your wall, and then onto the back of the heater. Use the provided wing nuts to secure the wall brackets and heater brackets together at an angle best suited for your area.
Plug the heater into your mains, or get a qualified electrician to hardwire it for you.
Infrared heaters use up to 60% less energy than electric convection heaters, because they warm up objects rather than the air.
As they have no moving parts, they require zero maintenance.
At just 22mm thick, and best installed at head height, they can save massive amounts of space, allowing you to use your entire floor space.
Our infrared panels are far better looking than conventional radiators, giving your home a more modern look.
Once they have reached the end of their huge 100,000 hour lifespan, they almost fully recyclable, further helping the environment even after they’re no longer fit for use.
|Surface Material||Premium FIR Coating|
|Dimensions (mm)||995mm x 595mm x 22mm|
|IP Rating||IP54 - Protected against splashes of water|
|Warranty||2 Years Upgradable to 5 Years|
|Product Features||Built in Thermostat with Remote Control|
|Requirements||Eco Design Requirements for Electric Local Space Heaters|