The 180W Classic Infrared Heating Panel is a brilliant way to heat your home, and to make some savings on your heating bills, too. It’s on the small side, which means it’s perfect for hiding out the way, such as underneath a desk, or even in your bathroom. It measures just 600mm x 300mm, and it’s just 22mm deep, meaning it sits almost flush to the wall!
The panel is made from FIR Coating, which can reach temperatures of around 115˚C, but it can of course be installed out of reach. It’s IP54 rated, which means it can handle splashes of water comfortably, so it’s easy to clean with a damp cloth.
Please note that the advised heated areas are for guidance only. For a more accurate heated area that is more relevant to your home, please either use our Calculator located at the top of this page, or speak to one of our Customer Services advisors about your room.
If you wish to ceiling mount your IR Panel, you will need to purchase a Suspension Kit alongside it. We advise leaving a gap of at least 5cm between the ceiling and panel once installed in order to ensure adequate airflow behind the heater.
This panel will come with a clear film on its front that needs to be peeled off before first use. If you use the heater before peeling the film off, the film may discolour and melt onto the surface of the heater.
Infrared heating works by firing infrared beams around your room, which heat up the objects they bounce off of. These beams are completely safe, as they are the same that your TV remote control probably uses. It’s also the same as the sun’s heat, although without any harmful UV rays.
There won’t be any stuffiness, as this heats objects not air, so there’s no cold spots or dust circulation. This can massively benefit your health, as there’s no dust circulation or cold spots, so there’s no mould or mildew in your room, either.
This 180W panel is great for heating small spaces, as it’s capable of heating a 3m2 space. Compared to central heating, infrared heating is a no-brainer really, as it can save you a whopping 60% on your heating bills!
Our infrared panels come with a brand new, highly advanced premium FIR Coating to help maximise the performance of your heater. It’s heat-resistant – meaning it can withstand temperatures up to 200oC without yellowing over time.
Not only that, but it will also help the carbon crystal heating element inside the panel distribute the IR waves better than ever before, thanks to a higher thermal efficiency, resulting in even more warmth in your home.
To top it all off, the coating is also far more secure than ever before, as it is fire resistant, ensuring your family and your home stay safe and warm.
The clean white finish is absolutely perfect to hide your heater in plain sight. In a kitchen or bathroom, you can add a little extra heat without having to resort to a clunky radiator, or an inefficient portable heater.
As it’s just 22mm in depth, you can easily pop it on the wall without it sticking out. With its small size, you can also hide it under a desk, or even use it in a downstairs cloakroom, for example, where space is a little tight.
Don’t forget, they can also be mounted on the ceiling, too, as they heat the objects and not the air, so there’s no rising hot air – just clean heat warming up the objects below.
Depending on how you use your panel, sometimes it may be handy to know when it is actually on.
You can of course plug it in, hard wire it, or use a thermostat to give you a better level of control.
However you choose to, we’ve integrated a blue LED in the corner, and the way it works is simple.
When the panel is on and emitting infrared heat around your room, the light will glow blue. When the panel switches off, so too will the LED light. This gives you the chance to see, at a glance, whether your heating panel is on or not!
The panels are so easy to install, too. There’s no complicated wiring or plumbing, as you can just take advantage of plugging it directly into the mains.
Plus, they’re simple to mount on your wall or ceiling.
They have brackets attached to the back of them already, so all you need is a couple of screws in your wall for them to hang on.
There’s a guide included, too. Just draw through the stencil provided, get the screws in the wall or ceiling, and mount your panel.
You’ll be up and running in minutes, and you can do it all yourself with ease. No plumbers, electricians, or handymen/women – just quick, efficient heat.
With a brilliant glossy white surface, it’s simple to just wipe clean with a damp cloth.
It’s sturdy too, and looks fantastic on your wall with its clean FIR Coating front.
The frame around the edge is tough white aluminium, so you know that the clean finish is continued.
On the back of the panel is a standard 240v junction box, with a generous 2 metres of heavy-duty flex and the standard UK 3-pin plug.
Don’t forget, if you wish to make your heater portable, you could always purchase one of our stylish infrared panel stands for a freestanding heating solution.
All of our white infrared heating panels come with a brilliant 14-day home trial period, so if you change your mind, you can either return or exchange it.
Mirrorstone also give you an incredible 2-year warranty, so there’s no need to worry about purchase protection. The warranty is extendable to 5 years at no extra charge.
If you have any questions about this panel heater, or infrared heating in general, then don’t be afraid to give us a shout. Call us on 0116 321 4124, email us at email@example.com, or check out our Facebook and Twitter pages.
Finance is a fantastic way to spread the cost of your purchase. To make it easy we've partnered with Duologi whose smart technology lets you apply for and then complete the loan application quickly and entirely online.
First add the items you wish to purchase to your basket. When you reach checkout select the best finance option for you and choose 'Pay with Duologi'. The quick application form takes no more than a couple of minutes to complete and then you'll receive an instant decision.
Before you apply please note you will only be considered for finance if you:
We offer a range of interest-free and interest bearing finance options to help you spread the cost of your purchase over 3, 6 or 12 months. The value of the loan needs to be over £300, all you need to do is pay a 20% deposit up front.
All panels come with free delivery within 2-3 days, and next day delivery is available for £5.99.
You can return your panel if you are not happy with it within 14 days of receiving it.
To install your panel or bar heater, drill 4 holes into your wall as per the mounting template provided with your heater.
For panels, insert the wall plugs, followed by the screws, and use the cross-hair bolt insertion hole brackets on the back of the panel to mount it in place.
For bar heaters, use the provided screws to mount the brackets onto your wall, and then onto the back of the heater. Use the provided wing nuts to secure the wall brackets and heater brackets together at an angle best suited for your area.
Plug the heater into your mains, or get a qualified electrician to hardwire it for you.
Infrared heaters use up to 60% less energy than electric convection heaters, because they warm up objects rather than the air.
As they have no moving parts, they require zero maintenance.
At just 22mm thick, and best installed at head height, they can save massive amounts of space, allowing you to use your entire floor space.
Our infrared panels are far better looking than conventional radiators, giving your home a more modern look.
Once they have reached the end of their huge 100,000 hour lifespan, they almost fully recyclable, further helping the environment even after they’re no longer fit for use.
|Surface Material||Premium FIR Coating|
|Dimensions (mm)||600mm x 300mm x 22mm|
|IP Rating||IP54 - Protected against splashes of water|
|Warranty||2 Years Upgradable to 5 Years|
|Requirements||Eco Design Requirements for Electric Local Space Heaters|