Natural IR Heat
Hurry Now! 10% Off All Heaters! Use Code: BIG10
If you’re looking for a simple way to transform your home, then look no further than the 795x1195 Santiago NXT Gen Infrared Heating Panel 900w. Built by Mirrorstone, this fantastic panel offers a discreet alternative to traditional styles of heaters which can now be printed on to improve your interior design.
This particular panel boasts a stunning image of Santiago, the growing capital of Chile. With a great view of the skyline, you can also see the surrounding Andes mountains which are being touched by the rising sun.
Measuring 795 x 1195mm, this panel can warm up a room approximately sized between 15-16m². Powered by 230V to use 900W, this radiator would look great affixed to the wall, especially as it is equipped with an IP54 rating.
Constructed using a premium FIR coating , you can rest assured knowing your panel will last for years to come. Despite reaching maximum temperatures of up to 95°C, these heaters still work out far safer due to the efficient way they dissipate the heat that is produced.
Infrared is a type of radiation which is found on the electromagnetic spectrum and is the exact same heat the Sun uses to heat the Earth. The only difference with our panels is that they do not emit the damaging UV rays meaning they are completely harmless!
Infrared panels transmit heat using thermal radiation with the infrared rays bouncing around the room. When they reach an object, some of the energy is absorbed and this process is repeated until a comfortable thermal mass has been reached. This works out much more efficient, and you will feel the heat far quicker than you would with standard central heating.
The reason why convection heaters are highly inefficient is because they use air as a medium to heat up a room. Creating this convection current leaves the room vulnerable to cold spots, with draughts often removing most of the heat.
As a convection current circulates the air, it also circulates dust, bacteria and moisture which has detrimental effects on the body, and will disrupt the integrity of your home.
Our infrared panels come with a brand new, highly advanced premium FIR Coating to help maximise the performance of your heater. It’s heat-resistant – meaning it can withstand temperatures up to 200oC without yellowing over time.
Not only that, but it will also help the carbon crystal heating element inside the panel distribute the IR waves better than ever before, thanks to a higher thermal efficiency, resulting in even more warmth in your home.
To top it all off, the coating is also far more secure than ever before, as it is fire resistant, ensuring your family and your home stay safe and warm.
Since 2018, LOT20 regulations because a must for all space heaters, which is how we founded our NXTGen range. Each heater now comes with a remote control and an integrated thermostat providing you with automation straight out of the box.
These heaters have amazing smart features which have been designed to help you save and reduce your power consumption. Automated temperature control does just this. It works by you setting a temperature, and your panel will turn itself on and off to maintain this so it isn’t on at all times.
The 7-day timer is a great function controlled via the remote allowing you to schedule on and off times so your heating is only on when needed.
With a 12-month warranty, we can ensure your remote will be protected.
The other two smart functions are called adaptive start and open-window detection. Adaptive start simply works by you setting a time and a temperature. The panel will then monitor the room before it is due to come on, and will turn itself on slightly early to make your room your desired temperature – cutting out those frosty mornings.
For more information and full details of the functionality of these features and the panels themselves, read through our NXTGen IR Manual here!
When it comes to installing these heaters, you will find that they are much easier than other traditional heating systems. In fact, all you need to do is follow our guide and put aside less than 30 minutes of your time.
To wall mount our heaters, simply use the provided drilling template and drill four holes into the wall. Then, insert the given wall plugs and screws and slot your panel into place using the brackets found on the back.
To neaten the aesthetics, feel free to ask a qualified electrician to remove the cabling and directly hard-wire the panel into the mains.
For an even easier installation, purchase a set of panel stands to leave the heater free-standing.
If you’re a city lover, but wanted a quieter and softer image, then check out the 795x1195 Paris Purple NXT Gen Infrared Heating Panel 900W. Created using lovely pink and purple hues, this panel has a fantastic shot of the Eiffel Tower printed onto it.
Alternatively, you could edge away from city skylines and embrace the beauty of nature with the 795x1195 Lakeside Mountain NXT Gen Infrared Heating Panel 900W. This gorgeous image shows off a snowy mountainous terrain which has a blanket of forestry in front of it. Perfect to add a little ambience to any home, this heater will make a great addition to your space.
Shop with complete confidence knowing your order will come with a 14-day trial period allowing you to see how infrared truly benefits your home.
All of our heaters come with a 2-year guarantee so you can have peace of mind knowing your products will be protected for years to come. The warranty can be extended to 5 years at no extra charge.
If you’re a registered VAT Tradesperson, you can create a trade account with us to save some pennies on your next order also.
Feel free to get in touch with our team if you need a helping hand with your order. We can be contacted over the phone on 0116 321 4124, or you can send us an email to email@example.com.
All panels come with free delivery within 2-3 days, and next day delivery is available for £5.99.
You can return your panel if you are not happy with it within 14 days of receiving it.
To install your panel or bar heater, drill 4 holes into your wall as per the mounting template provided with your heater.
For panels, insert the wall plugs, followed by the screws, and use the cross-hair bolt insertion hole brackets on the back of the panel to mount it in place.
For bar heaters, use the provided screws to mount the brackets onto your wall, and then onto the back of the heater. Use the provided wing nuts to secure the wall brackets and heater brackets together at an angle best suited for your area.
Plug the heater into your mains, or get a qualified electrician to hardwire it for you.
Infrared heaters use up to 60% less energy than electric convection heaters, because they warm up objects rather than the air.
As they have no moving parts, they require zero maintenance.
At just 22mm thick, and best installed at head height, they can save massive amounts of space, allowing you to use your entire floor space.
Our infrared panels are far better looking than conventional radiators, giving your home a more modern look.
Once they have reached the end of their huge 100,000 hour lifespan, they almost fully recyclable, further helping the environment even after they’re no longer fit for use.
|Surface Material||Premium FIR Coating|
|Dimensions (mm)||795mm x 1195mm x 22mm|
|IP Rating||IP54 - Protected against splashes of water|
|Warranty||2 Years Upgradable to 5 Years|
|Product Features||Built in Thermostat with Remote Control|
|Requirements||Eco Design Requirements for Electric Local Space Heaters|