Add plenty of heat to your room without the heater ever being noticeable. The 900W Classic Infrared Heating Panel is discreet enough to hide away, but can heat your room with ease. Measuring 795mm by 1195mm, this powerful 900w heater can supply enough warmth for an area that’s around 15m2.
The panel comes with a premium FIR Coating build, which can reach temperatures of around 115˚C. This isn’t a problem, of course, as these panels can be installed well out of reach, either high on the wall, or even on the ceiling! It’s IP54 rated, so there’s no need to worry about any splashes of water.
Please note that the advised heated areas are for guidance only. For a more accurate heated area that is more relevant to your home, please either use our Calculator located at the top of this page, or speak to one of our Customer Services advisors about your room.
If you wish to ceiling mount your IR Panel, you will need to purchase a Suspension Kit alongside it. We advise leaving a gap of at least 5cm between the ceiling and panel once installed in order to ensure adequate airflow behind the heater.
This panel will come with a clear film on its front that needs to be peeled off before first use. If you use the heater before peeling the film off, the film may discolour and melt onto the surface of the heater.
The infrared technology that these heaters use is very similar to the one that remote controls use. That’s how you know that this is completely safe. In fact, it’s the same heat that the sun provides, yet without any harmful radiation.
It works by firing penetrative infrared beams around the room, which bounce off the objects. They leave them warm, and move onto the next object. This is more efficient than conventional radiators, which work by heating the air around them. This in turn then rises, cools, and falls again, which requires more heat again, and also forms convectional currents.
These can have negative effects, such as mould growth, cold spots, and dust circulation, negatively affecting your health. Infrared heating doesn’t have this effect, as it is actually better than your health.
That’s not all, either, as infrared heating can save you a fortune – up to 60% on your heating bills!
Our infrared panels come with a brand new, highly advanced premium FIR Coating to help maximise the performance of your heater. It’s heat-resistant – meaning it can withstand temperatures up to 200oC without yellowing over time.
Not only that, but it will also help the carbon crystal heating element inside the panel distribute the IR waves better than ever before, thanks to a higher thermal efficiency, resulting in even more warmth in your home.
To top it all off, the coating is also far more secure than ever before, as it is fire resistant, ensuring your family and your home stay safe and warm.
The clean white finish on these panels is perfect for those who want to hide their heater in plain sight. Try it in a kitchen or a bathroom, where their IP54 rating comes in handy, as does the extra heat.
Plus, these panels mean no more bulky radiators, or having to lug around inefficient portable heaters. With a depth of just 22mm, you can easily pop it on the wall without it sticking out.
Don’t forget, because they heat the objects in the room, and not the air around them, they can also be mounted on the ceiling. That’s because there’s no hot air to rise up away from you.
If you’re worried about installing these panels, then don’t be; they’re extremely easy to fit into your home.
There are absolutely no electricians or plumbers needed to fit these panels, as there’s simply no professional help needed.
In fact, these are fully plug-and-play compatible, as they just plug in directly to the mains.
There’s a guide included in the box for you, too. It’s as easy as drawing through the guide, then drilling a couple of holes into the wall.
Insert the screws, and you can mount your panel onto them using the two brackets on the rear. It takes just a few minutes to get everything done, and you can do it all by yourself!
You have so many options as to how you use your panel – you can simply plug it in, hardwire it, or you can use a thermostat with it for more control.
Regardless of how you connect your heater, you’ll want to know when it’s actually on.
That’s where our ingenious LED indicator comes into play.
Quite simply, it lights up blue when your panel is on and emitting infrared heat all around your room.
When the panel switches off for whatever reason, so too will the LED light. This lets you see at a glance whether your panel is on or not, eliminating any potential confusion.
With a gloriously glossy white finish, it’s easy to keep clean. Just give it a wipe with a damp cloth, and that’s all the upkeep it’ll need. That’s right – with an infrared panel, there’s no maintenance required whatsoever.
As there’s no moving points involved, there’s nothing that’ll need servicing or repairing, unlike an expensive-to-run boiler. In fact, these infrared panels can actually last for around 30 years of usage!
On the back of the panel is a standard 240v junction box, with a healthy 2 metres of heavy-duty flex and the standard UK 3-pin plug.
Don’t forget, if you wish to make your heater portable, you could always purchase one of our stylish infrared panel stands for a freestanding heating solution.
Our white infrared heating panels come with a generous 14-day home trial period, so if you change your mind, you can either return or exchange it.
Mirrorstone also give you an amazing 2-year warranty, so there’s no need to worry about purchase protection. You can aldo upgrade this to 5 years at no extra cost.
If you have any questions about this panel heater, or infrared heating in general, then don’t be afraid to give us a shout. Call us on 0116 321 4124, email us at firstname.lastname@example.org, or check out our Facebook and Twitter pages.
Finance is a fantastic way to spread the cost of your purchase. To make it easy we've partnered with Duologi whose smart technology lets you apply for and then complete the loan application quickly and entirely online.
First add the items you wish to purchase to your basket. When you reach checkout select the best finance option for you and choose 'Pay with Duologi'. The quick application form takes no more than a couple of minutes to complete and then you'll receive an instant decision.
Before you apply please note you will only be considered for finance if you:
We offer a range of interest-free and interest bearing finance options to help you spread the cost of your purchase over 3, 6 or 12 months. The value of the loan needs to be over £300, all you need to do is pay a 20% deposit up front.
All panels come with free delivery within 2-3 days, and next day delivery is available for £5.99.
You can return your panel if you are not happy with it within 14 days of receiving it.
To install your panel or bar heater, drill 4 holes into your wall as per the mounting template provided with your heater.
For panels, insert the wall plugs, followed by the screws, and use the cross-hair bolt insertion hole brackets on the back of the panel to mount it in place.
For bar heaters, use the provided screws to mount the brackets onto your wall, and then onto the back of the heater. Use the provided wing nuts to secure the wall brackets and heater brackets together at an angle best suited for your area.
Plug the heater into your mains, or get a qualified electrician to hardwire it for you.
Infrared heaters use up to 60% less energy than electric convection heaters, because they warm up objects rather than the air.
As they have no moving parts, they require zero maintenance.
At just 22mm thick, and best installed at head height, they can save massive amounts of space, allowing you to use your entire floor space.
Our infrared panels are far better looking than conventional radiators, giving your home a more modern look.
Once they have reached the end of their huge 100,000 hour lifespan, they almost fully recyclable, further helping the environment even after they’re no longer fit for use.
|Surface Material||Premium FIR Coating|
|Dimensions (mm)||795mm x 1195mm x 22mm|
|IP Rating||IP54 - Protected against splashes of water|
|Warranty||2 Years Upgradable to 5 Years|
|Requirements||Eco Design Requirements for Electric Local Space Heaters|