Treat your home to something special such as an amazing Mirrorstone infrared panel heater. Possessing the ability to be customised, this heater is both efficient and discreet. Measuring approximately 795mm by 1195mm, the 900w heater can warm an area of around 15m2. At just 22mm in depth, this heater can fit quite snugly against your wall or ceiling with ease.
It has a premium FIR Coated build, which means it’s sturdy, and it looks great. It can reach a surface temperature of around 75-95˚C, so you don’t need to worry about it burning you if you accidentally touch it. However, that’s actually harder to do when compared to a traditional radiator, as these can be installed high up on your wall, or even on the ceiling! It comes with an IP54 rating, so you can rest assured that it is protected against splashes of water.
Please note that the advised heated areas are for guidance only. For a more accurate heated area that is more relevant to your home, please either use our Calculator located at the top of this page, or speak to one of our Customer Services advisors about your room.
Infrared heating is a groundbreaking technology that can revolutionise how you heat your home. It’s extremely efficient, thanks to how differently it distributes its heat, compared to traditional radiators. They can even save you around 60% on your heating bills! An infrared heater works by heating the objects in the room, rather than just the air around the room. This is by firing out infrared beams, which bounce off of the objects, leaving them warmed.
A conventional heater, however, heats the air, which rises to the ceiling, cools, and fails again, creating a convectional current. This often leads to problems such as dust circulation, cold spots, and mould growth. This is why infrared heating is better for your health. The technology used by infrared heaters is similar to that used by TV remote controls, making it completely safe to use. In fact, the heat it provides is the same as the sun’s, yet without any of the harmful ultraviolet radiation that the sun emits.
Our infrared panels come with a brand new, highly advanced premium FIR Coating to help maximise the performance of your heater. It’s heat-resistant – meaning it can withstand temperatures up to 200oC without yellowing over time.
Not only that, but it will also help the carbon crystal heating element inside the panel distribute the IR waves better than ever before, thanks to a higher thermal efficiency, resulting in even more warmth in your home.
To top it all off, the coating is also far more secure than ever before, as it is fire resistant, ensuring your family and your home stay safe and warm.
Our NXTGEN heaters are super-efficient, and conform to the Lot20 legislation. They do this with a 39% efficiency rating out of a possible 40%.
They have automated temperature control, so they will maintain your room’s temperature to one that you have chosen. You also get a 7-day timer, so you can set separate timers to suit your schedule.
Adaptive start means that your panel will switch on before the time you choose, so that the room is at the right temperature at the right time.
Plus, you get open window detection, which means that if your room drops by 1.5˚C in 3 minutes, the panel will switch off, as continuing to try and heat the room would be inefficient. Have a look at the NXTGEN manual for more information.
For total control over all these different features, you can just use the amazing remote control that is supplied with every single NXTGEN heater.
It comes with an electronic thermostat, which is far more accurate than a mechanical thermostat, so you know exactly what is going on with the level of heat. You can easily adjust the temperature of the heater, and set your different timers for different days.
You can set the adaptive start for the panel, so you know you’re not wasting any power. The remote can be paired with multiple heaters, so you can heat more than one room at a time.
It’s much easier to control your heating from your seat, so no more trekking over to your boiler or thermostat for extra heat.
Having total control over every single feature that the NXTGEN heaters have can be a little confusing sometimes, especially when you don’t have the remote control close to hand.
That’s why we’ve given you a super-helpful blue LED light built into the panel, so you know exactly what your heater is doing at any given time. If the light is illuminated, then the heater is actively heating your room efficiently.
If the light isn’t on, then it doesn’t necessarily mean your heater is switched off. It could be that your room is at the desired time, or it could mean that the heater is off. Either way, it’s not actively heating.
With a lovely slimline appearance, this is unlike any other heater. Thanks to its innovative build, it can be installed high on the wall, or even on the ceiling.
Compared to a chunky radiator, or an inefficient portable heater, this heater really is the best your money can buy.
The best thing about them, however, is their ability to be customised. You can get your own photo printed on them to make your look amazing whilst providing efficient heat.
Whether it’s a wedding snap, a family portrait, or a cheeky selfie, you can complete the discreet look for your heating. It’s easy to do, with just a few simple steps required…
Ordering your custom printed IR panel is a simple process. All you need to do is order your panel in the usual way, and then email us the image you’d like printed on it to firstname.lastname@example.org. Make sure that you enclose your name and the order number.
Before sending us any images for print, it would be a good idea to check if the image you’re sending is of a high enough quality. You can find out more about this process by following our image quality guide, in order to ensure that your print turns out as good as possible.
Once we’ve received your image, we’ll send you a mock-up so that you can approve it. Let us know you’re happy with this and we’ll then go ahead and print up your custom infrared heating panel.
We can also create collages if you'd like multiple images on your panel, though this may result in additional charges. Any collages cannot be created until payment has been processed for the panel.
The usual turnaround time is about 5 working days after we receive approval of the mock-up, then we’ll send it out to you for next-day delivery.
Our custom NXTGEN heating panels come with a comprehensive 2-year warranty, to give you peace of mind about your purchase. You can upgrade this to 5 years at no extra cost.
We cannot accept any returns or exchanges on this product, however, as it will have been customised for you specially.
If you wish to learn more about infrared heating in general, then don’t be afraid to get in touch. Call us on 0116 321 4124, email us at email@example.com, or check out our Facebook and Twitter pages.
Finance is a fantastic way to spread the cost of your purchase. To make it easy we've partnered with Duologi whose smart technology lets you apply for and then complete the loan application quickly and entirely online.
First add the items you wish to purchase to your basket. When you reach checkout select the best finance option for you and choose 'Pay with Duologi'. The quick application form takes no more than a couple of minutes to complete and then you'll receive an instant decision.
Before you apply please note you will only be considered for finance if you:
We offer a range of interest-free and interest bearing finance options to help you spread the cost of your purchase over 3, 6 or 12 months. The value of the loan needs to be over £300, all you need to do is pay a 20% deposit up front.
All panels come with free delivery within 2-3 days, and next day delivery is available for £5.99.
You can return your panel if you are not happy with it within 14 days of receiving it.
To install your panel or bar heater, drill 4 holes into your wall as per the mounting template provided with your heater.
For panels, insert the wall plugs, followed by the screws, and use the cross-hair bolt insertion hole brackets on the back of the panel to mount it in place.
For bar heaters, use the provided screws to mount the brackets onto your wall, and then onto the back of the heater. Use the provided wing nuts to secure the wall brackets and heater brackets together at an angle best suited for your area.
Plug the heater into your mains, or get a qualified electrician to hardwire it for you.
Infrared heaters use up to 60% less energy than electric convection heaters, because they warm up objects rather than the air.
As they have no moving parts, they require zero maintenance.
At just 22mm thick, and best installed at head height, they can save massive amounts of space, allowing you to use your entire floor space.
Our infrared panels are far better looking than conventional radiators, giving your home a more modern look.
Once they have reached the end of their huge 100,000 hour lifespan, they almost fully recyclable, further helping the environment even after they’re no longer fit for use.
|Surface Material||Premium FIR Coating|
|Dimensions (mm)||795mm x 1195mm x 22mm|
|IP Rating||IP54 - Protected against splashes of water|
|Warranty||2 Years Upgradable to 5 Years|
|Product Features||Built in Thermostat with Remote Control|
|Requirements||Eco Design Requirements for Electric Local Space Heaters|