Natural IR Heat
Hurry Now! NEW YEAR FLASH Sale Now On! 10% Off! Use Code: FLASH10
Upgrade your home heating system to our stunning and discreet infrared panels. Created by Mirrorstone, the 995x1195 Coastal Beauty NXT Gen Infrared Heating Panel 1200W is a truly gorgeous panel heater with a peaceful image printed onto the surface.
The Coastal Beauty is a unique image showing off a peaceful bay which is surrounded by cliffs. Perfect to install in any home, we can guarantee that the image will look great with any décor and will be ideal for the bedroom.
Measuring 995 x 1195mm, it will require a fair amount of space. As this is our largest panel, it will heat up a larger area and it can approximately warm up a room measuring between 19-20m². Equipped with an IP54 rating, your panel will be protected against any accidental splashes of water.
The sturdy FIR coating allows this panel to have an extensive lifespan of up to 25 years. Despite reaching maximum temperatures of up to 95°C, the panel will not burn to touch as it can effectively dissipate the heat produced.
Infrared heating is a rather new concept that has changed the world of heating. Working in a brand-new way, this innovative product will reduce your bills, help the planet and it will also benefit your health and home.
Convection radiators work by warming up the air which leaves the area prone to cold spots and draughts. Infrared, however, uses radiation waves to warm up the objects within the room creating a steady thermal mass. Without heating the air, no moisture will be circulated and the dry heat from infrared will work opposingly, eradicating any damp or mould growth.
Infrared is also completely safe. It is naturally occurring and is the same radiation the Sun uses to heat the Earth, only without the damaging UV rays.
Our infrared panels come with a brand new, highly advanced premium FIR Coating to help maximise the performance of your heater. It’s heat-resistant – meaning it can withstand temperatures up to 200oC without yellowing over time.
Not only that, but it will also help the carbon crystal heating element inside the panel distribute the IR waves better than ever before, thanks to a higher thermal efficiency, resulting in even more warmth in your home.
To top it all off, the coating is also far more secure than ever before, as it is fire resistant, ensuring your family and your home stay safe and warm.
Due to LOT20 regulations which took effect back in 2018, we decided to revamp our already efficient panels to which we founded our NXTGen range. Each comes with a remote control and a built-in thermostat to optimise your savings and reduce your power consumption.
With the remote, you can set features such as the 7-day timer. This allows you to schedule on and off periods for both the week and the weekend so your heating is only on when needed. The integrated thermostat then allows you to set your desired temperature, and the thermostat will then monitor the room, turning your panel on and off to maintain this.
The remote comes with a 12-month warranty to ensure every part of your purchase is protected.
The real magic starts with adaptive start and open-window detection, however. Adaptive start works by you setting a time along with a temperature, and your panel will ensure your room is that warm for that time. This will certainly help during those chilly winter mornings.
Not forgetting open-window detection which is great should you ever forget to turn your heater off. Essentially, this feature works by monitoring the room and if it notices a sudden drop in temperature of 1.5° within 3 minutes, the panel will turn itself off. This is namely caused by opening a window and has been put in place to help you save.
Read through our NXTGen IR Manual if you need any more information.
Our panels are incredibly simple to install, so simple in fact that any DIY amateur could do it. If you choose to wall mount the panel, all you will need to do is follow our guide. Alternatively, you could make installation that touch easier by purchasing a set of panel stands to leave your panel free-standing and fully portable.
To wall mount, follow our drilling template and drill four holes into the wall. Once complete, you can insert the wall plugs and screws which allow you to slot the panel into place with the cross-hair brackets found on the back.
There will be very little maintenance too! Without the need for a specialist to check on the appliance, all you will need to do is wipe the panel clean of any dust.
We have a huge selection of different Image IR Panels to choose from on our site here at Surya Heating.
Looking for something slightly more colourful? Then take a look at the 995x1195 Dreamy Lake NXT Gen Infrared Heating Panel 1200W. This gorgeous image has vibrant pink, purple and orange hues which create all create a soft sunset over the still lake.
Take yourself away with the 995x1195 Venice NXT Gen Infrared Heating Panel 1200w. This is a fantastic image of Venice showing off the tiny boats sailing down one of the many rivers. This romantic and artistic image will be great for any city lover.
We provide an extendable two-year warranty in order to ensure your purchase is protected throughout.
We also supply a 14-day home trial period should you wish to return your panel. Unfortunately, any panels with the plug or cabling removed will no longer be eligible for a refund.
If you have any questions, feel free to get in touch with our team of advisors. They will be able to help you out and make recommendations on which heaters will be best for your space. We can be contacted either over the phone on 0116 321 4124, or you can send us an email to email@example.com.
All panels come with free delivery within 2-3 days, and next day delivery is available for £5.99.
You can return your panel if you are not happy with it within 14 days of receiving it.
To install your panel or bar heater, drill 4 holes into your wall as per the mounting template provided with your heater.
For panels, insert the wall plugs, followed by the screws, and use the cross-hair bolt insertion hole brackets on the back of the panel to mount it in place.
For bar heaters, use the provided screws to mount the brackets onto your wall, and then onto the back of the heater. Use the provided wing nuts to secure the wall brackets and heater brackets together at an angle best suited for your area.
Plug the heater into your mains, or get a qualified electrician to hardwire it for you.
Infrared heaters use up to 60% less energy than electric convection heaters, because they warm up objects rather than the air.
As they have no moving parts, they require zero maintenance.
At just 22mm thick, and best installed at head height, they can save massive amounts of space, allowing you to use your entire floor space.
Our infrared panels are far better looking than conventional radiators, giving your home a more modern look.
Once they have reached the end of their huge 100,000 hour lifespan, they almost fully recyclable, further helping the environment even after they’re no longer fit for use.
|Surface Material||Premium FIR Coating|
|Dimensions (mm)||995mm x 1195mm x 22mm|
|IP Rating||IP54 - Protected against splashes of water|
|Warranty||2 Years Upgradable to 5 Years|
|Product Features||Built in Thermostat with Remote Control|
|Requirements||Eco Design Requirements for Electric Local Space Heaters|