Check out this amazingly attractive panel heater to redesign your space. The 995x1195 Thunder Mountain NXT Gen Infrared Heating Panel 1200W from Mirrorstone is a gorgeous panel with a unique and distinct image printed onto the surface.
The Thunder Mountain is a great image, showing off a calm lake surrounded by mountains. It has a stark bolt of lighting streaking through the centre adding a lovely orange glow to the panel.
This image panel is our largest sized heater, measuring 995 x 1195mm and has the ability to warm up a room measuring 19-20m². With a slimline depth of just 22mm, the panel will fit snug to the wall without protruding as a typical radiator does. Your heater also comes with an additional layer of protection thanks to its IP54 rating.
Constructed using premium materials, you can rest-assured knowing your panel has been built to last.
Don’t forget to complement your panel by choosing a frame from the following colour options: white, silver or black.
Infrared heating is a fantastic alternative to old-fashioned and traditional home heating methods. It uses far-infrared radiation which is a perfectly safe type of radiation found on the electromagnetic spectrum.
Essentially, it is the same type of heat you feel from the sun, only without the harmful UV rays. Our panels will also warm up your room in the same way the sun does too. This is by heating objects directly, rather than heating up the air. This proves to be highly efficient, saving up to 60% on your heating bills.
Using 100% of the heat they produce, they will effectively warm up your rooms for less, without the typical heat loss you get with convection heaters. By creating a thermal mass using the objects rather than the air, you will not experience any heat loss from draughts or even by open doors for example.
Our infrared panels come with a brand new, highly advanced premium FIR Coating to help maximise the performance of your heater. It’s heat-resistant – meaning it can withstand temperatures up to 200oC without yellowing over time.
Not only that, but it will also help the carbon crystal heating element inside the panel distribute the IR waves better than ever before, thanks to a higher thermal efficiency, resulting in even more warmth in your home.
To top it all off, the coating is also far more secure than ever before, as it is fire resistant, ensuring your family and your home stay safe and warm.
When you upgrade your heating to our NXTGen panels, you will also receive a handy remote control allowing you to manage your heating with ease. Our panels fully comply with LOT20 legislation which further aid to ensure you reduce your power consumption.
With the remote, you can control features such as the 7-day timer. Allowing you to set alternate on and off times for the week and the weekends, you can make sure your heating is only when needed.
There is also automated temperature control, a great feature which will maintain the temperature you set using the remote. It will cause the panel to turn itself on and off to help you save.
The remote is covered by a 12-month manufacturer’s guarantee.
Where the panel gets really clever is with adaptive start and open-window detection. Using the integrated thermostat, open-window detection does exactly what it says. It will detect any open windows, turning your panel off to conserve energy. Should the panel notice a 1.5°C temperature drop within 3 minutes, it will automatically switch off.
The final addition is adaptive start. With this feature, your room will be brought up to your desired temperature for the time that you set. It does this by switching on slightly early, saving valuable time and energy.
Check out our NXTGen IR Manual for more details about the smart features along with the full functionality of our panels!
There’s no need to worry about how to install these panels as this can be done with absolute ease! There are two ways to install our panels. You can either opt for wall mounting, or you can purchase a set of panel stands and leave it to rest free-standing.
To wall-mount, follow our basic guide. To start, drill four holes using our provided drilling template and then insert the wall plugs and screws. From this, you are able to slot the panel into place by using the cross-hair brackets found on the back of the heater.
For a better finish, we recommend asking a qualified electrician to directly hard-wire the cable into the mains.
When it comes to styling your home, we can guarantee that you will find the perfect Image IR Panel to complement your space.
If you prefer contemporary styling, then we recommend the 995x1195 Clouded Trees NXT Gen Infrared Heating Panel 1200W. This is a black and white panel showing a thick and heavy layer of fog crowding a large forest.
Looking for something slightly more colourful? Then check out the 995x1195 Paris Purple NXT Gen Infrared Heating Panel 1200W. This is a romantic image of the Eiffel Tower with an overcast sky that is illuminated with lovely pink and purple hues.
When you make a purchase with us, you will benefit from our 14-day trial policy in which you can test how infrared works for your home.
If you are not 100% satisfied with your purchase, you will be able to return your panel back to us. Unfortunately, if you have removed the plug and the cabling, you will no longer be eligible for a refund.
Removing the plug does not interfere with your fantastic two-year guarantee, however.
Don’t forget to give us a call on 0116 321 4124 if you need a helping hand with your order. You will also be able to reach us on email at email@example.com for your convenience.
All panels come with free delivery within 2-3 days, and next day delivery is available for £5.99.
You can return your panel if you are not happy with it within 14 days of receiving it.
To install your panel or bar heater, drill 4 holes into your wall as per the mounting template provided with your heater.
For panels, insert the wall plugs, followed by the screws, and use the cross-hair bolt insertion hole brackets on the back of the panel to mount it in place.
For bar heaters, use the provided screws to mount the brackets onto your wall, and then onto the back of the heater. Use the provided wing nuts to secure the wall brackets and heater brackets together at an angle best suited for your area.
Plug the heater into your mains, or get a qualified electrician to hardwire it for you.
Infrared heaters use up to 60% less energy than electric convection heaters, because they warm up objects rather than the air.
As they have no moving parts, they require zero maintenance.
At just 22mm thick, and best installed at head height, they can save massive amounts of space, allowing you to use your entire floor space.
Our infrared panels are far better looking than conventional radiators, giving your home a more modern look.
Once they have reached the end of their huge 100,000 hour lifespan, they almost fully recyclable, further helping the environment even after they’re no longer fit for use.
|Surface Material||Premium FIR Coating|
|Dimensions (mm)||995mm x 1195mm x 22mm|
|IP Rating||IP54 - Protected against splashes of water|
|Warranty||2 Years Upgradable to 5 Years|
|Product Features||Built in Thermostat with Remote Control|
|Requirements||Eco Design Requirements for Electric Local Space Heaters|