Natural IR Heat
Hurry Now! 10% Off All Heaters! Use Code: BIG10
Our 995 x 1195 Waterfalls Printed Infrared Heating Panel 1200W from Mirrorstone Heating represents some of the finer things about nature – you have solid rock and small cliff formations, the rush of water falling into the river, as well as the green of the surrounding trees.
Look closely enough, and you might actually be able to hear the steady crashing of the water against the river bed, such is the power of the image available.
Measuring 995 x 1195 x 22mm, the premium FIR coated surface beams out 1200W of infrared waves throughout your room, filling it with natural and refreshing heat.
The surface of the panel can reach temperatures as high as 95oC, though it does remain safe to touch for short periods of time because of the way the panel distributes its warmth.
Fancy a different coloured frame? You can pick from a choice of white, silver or black before you add it to your cart!
Our infrared panels come with a brand new, highly advanced premium FIR Coating to help maximise the performance of your heater. It’s heat-resistant – meaning it can withstand temperatures up to 200oC without yellowing over time.
Not only that, but it will also help the carbon crystal heating element inside the panel distribute the IR waves better than ever before, thanks to a higher thermal efficiency, resulting in even more warmth in your home.
To top it all off, the coating is also far more secure than ever before, as it is fire resistant, ensuring your family and your home stay safe and warm.
With one of our NXT Gen IR Panels, you will get some incredible functionality. They come with a built-in thermostat and remote control, which means they are all compliant with the new Lot 20 legislation. This means that these panels can be automatically controlled straight out of the box!
Automated temperature control allows you to set the desired temperature for your room, and let the panel does the work. It turns on and off to make sure that your room stays at the temperature you’re after. It has a 7-day timer, too, that allows you to set different on/off times for weekdays and weekends.
Where the panel truly works its magic is through the adaptive start and open window detection. Adaptive start means that your panel uses its brain to work out when to switch on to make sure that your room is at your desired temperature at your desired time. This means no more random guesswork for you. The open window detection means that if there’s a sudden temperature drop, like when you open a window, the panel will switch off, to save you energy.
Our NXT Gen IR Panel manual has full details of the functionality, and how this heater will genuinely improve your livelihood.
The remote control is covered by an extensive one-year manufacturer’s warranty.
The great thing about our range of 995 x 1195 Image IR Panels is that they don’t look like electric heaters, and allow you to use your entire floor space, as you don’t have to place your furniture in accordance to your heater like you do with convection radiators.
This is what makes them such a good choice, so let’s take a look at a selection of alternatives.
Creating an awesome juxtaposition is our 995 x 1195 Thunderstorm Printed Infrared Heating Panel, blending the fearsome might of nature and the technical excellence of mankind, as the thunderbolts stab the skies that look over New York City.
It still does beam out 1200W of clean IR heat though, making it powerful enough for large areas like the living room.
An alternative electric panel with a completely different kind of image on it is our 995 x 1195 Winters Drive Infrared Heating Panel 1200W. A still crispness takes hold of the air, as the long road flanked by trees is enveloped in a thick white carpet of snow.
The level of heat given off contrasts with the image depicted, and will make you feel incredibly warm thanks to 1200W of IR heat.
You could also go one step further and get one of your own images printed on an IR electric panel through our range of custom Image IR panel heaters. Simply purchase your panel, send us a hi-res copy of the image you wish to have printed to firstname.lastname@example.org, and we’ll take care of the rest!
There’s a very simple method of calculating how many panels you need – all you need is a measuring tape, a calculator, and some knowledge about your own home.
Start off by measuring the length, width and height of your room in metres. Multiply all these values by each other, and this will give you the volume of your room in m3.
Here’s where you knowledge of your home comes in – the number of panels you’ll need will depend on how well insulated your house is.
Well insulated homes need just 20W per m3, moderately insulated homes need slightly more at 25W per m3, whilst poorly insulated homes need 30W per m3.
What you’ll need to do now is to multiply the volume of your room by the recommended wattage per m3, which will give you the total wattage required.
So, for example, a moderately insulated room measuring 5m x 4m x 2.5m has a volume of 50m3. It needs 25W per m3, giving a total wattage requirement of 1250W.
It’s clear then, that our featured 1200W panel would be sufficient in heating the room in question. You could mix and match them too, combining two separate 580W panels for example.
All panels come with a 14 day home trial period unless otherwise stated, giving you the chance to return it for a full refund or exchange if you’ve changed your mind. Image panels like the one above will be subject to a 15% restocking fee for any returns however.
We’re so sure of the quality of our panels too, that they all come with an extendable 2 year manufacturer’s replacement warranty should anything go wrong, so you’re well protected in the long term.
Please feel free to give us a call on 0116 321 4124, or to email us at email@example.com if you’d like to ask us anything about this panel, the advantages of infrared heat, trade purchases or anything else.
Don’t forget that we’re also on Facebook, so go ahead and give our page a like and let us know what you think!
All panels come with free delivery within 2-3 days, and next day delivery is available for £5.99.
You can return your panel if you are not happy with it within 14 days of receiving it.
To install your panel or bar heater, drill 4 holes into your wall as per the mounting template provided with your heater.
For panels, insert the wall plugs, followed by the screws, and use the cross-hair bolt insertion hole brackets on the back of the panel to mount it in place.
For bar heaters, use the provided screws to mount the brackets onto your wall, and then onto the back of the heater. Use the provided wing nuts to secure the wall brackets and heater brackets together at an angle best suited for your area.
Plug the heater into your mains, or get a qualified electrician to hardwire it for you.
Infrared heaters use up to 60% less energy than electric convection heaters, because they warm up objects rather than the air.
As they have no moving parts, they require zero maintenance.
At just 22mm thick, and best installed at head height, they can save massive amounts of space, allowing you to use your entire floor space.
Our infrared panels are far better looking than conventional radiators, giving your home a more modern look.
Once they have reached the end of their huge 100,000 hour lifespan, they almost fully recyclable, further helping the environment even after they’re no longer fit for use.
|Surface Material||Premium FIR Coating|
|Dimensions (mm)||995mm x 1195mm x 22mm|
|IP Rating||IP54 - Protected against splashes of water|
|Warranty||2 Years Upgradable to 5 Years|
|Product Features||Built in Thermostat with Remote Control|
|Requirements||Eco Design Requirements for Electric Local Space Heaters|