Treat your interior or exterior to the best heating there is, with a superb Mirrorstone infrared bar heater. Efficient, eco-friendly, and far more practical than central heating, infrared heating is a true revolution. This particular bar heater measures approximately 862mm by 345mm, and, with a power output of 1000w, can heat an area of around 15m2. With a depth of just 272mm, you don’t need to worry about this heater sticking out too much, especially since it can be installed high up on the wall, or even on the ceiling.
In terms of build quality, you have no need to worry. This panel is constructed from glass and aluminium, which both look highly professional, and feel sturdy. Whilst the heater can reach a surface temperature of around 200-300˚C, hotter than a traditional radiator, it will not be an issue. That’s because it can be installed well out of reach, either high up on the wall, or even on the ceiling. This means that accidental touches should be kept to a minimum.
The heater comes with an IP44 rating, so it is protected against any accidental splashes of water. However, if it is installed outside, we recommend that it be under a cover, in case of any heavy rain.
Please note that the advised heated areas are for guidance only. For a more accurate heated area that is more relevant to your home, please either use our Calculator located at the top of this page, or speak to one of our Customer Services advisors about your room.
Infrared heating is very efficient, as it delivers its heat in a completely different way to a conventional radiator works. Actually, an infrared heater can actually help you to save 60% on your heating bills!
By heating the objects in the room, rather than just the air around the room, an infrared heater can save energy. It fires infrared beams that bounce off of the objects in the room, leaving them warmed.
A conventional heater, however, heats the air, which rises to the ceiling, cools, and falls again, creating a convectional current. This can then promote dust circulation, mould growth, and cold spots, which is why infrared heating is better for your health.
Infrared heating is also very safe. It uses the same technology as your TV remote control, and the heat it provides is the same that the sun does. In fact, our own bodies produce infrared radiation, too. However, infrared heating does not produce any of the harmful ultraviolet radiation as the sun does.
Don’t worry about struggling to install these bar heaters. They’re a complete DIY task, with no additional help required at all.
That’s no plumbers, electricians, or carpenters that are needed – just you, a drill, and a few minutes of your time. It’s only a one-person job, so you can have it done within a matter of minutes.
It’s easy to do, and very straightforward. All you need to do is use your drill to make some holes in your wall. Then, simply screw the heater to your wall using the rear-mounted brackets.
Next up, you just have to plug it into your wall. It’s completely plug-and-play compatible, so you don’t have to worry about any electrical work. The brackets are adjustable, so you can direct the heat to different angles.
Please be aware that if the units are not cleaned regularly, a build-up of dust may appear. Find out more about how to maintain your heaters here!
If you just have a quick glance at your heater from afar, then it might be hard to know exactly what your infrared bar heater is up to at that exact moment.
If you’re some distance away from it, you might not even know if it’s switched on. You don’t need to worry though, as we’ve included a feature to make your life much easier.
Whenever the panel is turned on and producing heat, a small red LED light will come on. When the bar heater is off, the LED will copy it, and switch off itself.
This helpful addition tells you exactly when your heater is doing its job and when it’s been told not to, so you can have confidence that it is definitely doing as you’ve asked.
Included with all of our Mirrorstone infrared bar heaters is a superb 14-day home trial period, so you could either return or exchange it, if you have a change of heart.
Mirrorstone also provide these with an impressive 2-year warranty, so you may shop with confidence. These can also be upgraded to 5 years at no extra cost.
If you would like any extra details about this, or any of our other infrared heaters, then don’t be afraid to get in touch. Call us on 0116 321 4124, email us at email@example.com, or have yourself a look at our Facebook and Twitter pages.
Finance is a fantastic way to spread the cost of your purchase. To make it easy we've partnered with Duologi whose smart technology lets you apply for and then complete the loan application quickly and entirely online.
First add the items you wish to purchase to your basket. When you reach checkout select the best finance option for you and choose 'Pay with Duologi'. The quick application form takes no more than a couple of minutes to complete and then you'll receive an instant decision.
Before you apply please note you will only be considered for finance if you:
We offer a range of interest-free and interest bearing finance options to help you spread the cost of your purchase over 3, 6 or 12 months. The value of the loan needs to be over £300, all you need to do is pay a 20% deposit up front.
All panels come with free delivery within 2-3 days, and next day delivery is available for £5.99.
You can return your panel if you are not happy with it within 14 days of receiving it.
To install your panel or bar heater, drill 4 holes into your wall as per the mounting template provided with your heater.
For panels, insert the wall plugs, followed by the screws, and use the cross-hair bolt insertion hole brackets on the back of the panel to mount it in place.
For bar heaters, use the provided screws to mount the brackets onto your wall, and then onto the back of the heater. Use the provided wing nuts to secure the wall brackets and heater brackets together at an angle best suited for your area.
Plug the heater into your mains, or get a qualified electrician to hardwire it for you.
Infrared heaters use up to 60% less energy than electric convection heaters, because they warm up objects rather than the air.
As they have no moving parts, they require zero maintenance.
At just 22mm thick, and best installed at head height, they can save massive amounts of space, allowing you to use your entire floor space.
Our infrared panels are far better looking than conventional radiators, giving your home a more modern look.
Once they have reached the end of their huge 100,000 hour lifespan, they almost fully recyclable, further helping the environment even after they’re no longer fit for use.
|Surface Material||Glass & Aluminium|
|Dimensions (mm)||862mm x 345mm x 272mm|
|IP Rating||IP44 - Protected against splashes of water|
|Warranty||2 Years Upgradable to 5 Years|