100% Recyclable
14 Days Home Trial
Free Shipping
5 Year Warranty*
100% Recyclable
Natural IR Heat
Energy Efficient
Space Saving
Zero Maintenance
Simple Plug & Play
This panel is currently available for pre-order and will be with us around 28th May 2021. We apologise for any inconvenience caused.
Looking for something else? Why not check out our Classic White Infrared Heating Panels or our Solis Wi-Fi Infrared Heating Panels!
Check out this discreet way of heating your home. Extremely efficient, our infrared heating panels really improve on central heating in a number of different ways. It measures 995mm by 1195mm, and thanks to the powerful 1200W, can heat an area of around 20m2. It measures just 22mm in depth, too, so can fit snugly against the ceiling or the wall.
It is made from premium white FIR Coating, so you can rest assured it’s made from the best materials. It can reach a temperature of around 75-95˚C, but can thankfully be installed well out of reach. It comes with an IP54 rating, so can easily withstand splashes of water.
Please note that the advised heated areas are for guidance only. For a more accurate heated area that is more relevant to your home, please either use our Calculator located at the top of this page, or speak to one of our Customer Services advisors about your room.
By choosing the ceiling mount option when purchasing your panel, a Suspension Kit will also be dispatched with your order. We advise leaving a gap of at least 5cm between the ceiling and panel once installed in order to ensure adequate airflow behind the heater.
This panel will come with a clear film on its front that needs to be peeled off before first use. If you use the heater before peeling the film off, the film may discolour and melt onto the surface of the heater.
Infrared heating is far more efficient than central heating due to the way it actually heats. They can save you a massive 60% on your heating bills. Rather than heating the air, like a conventional heater, infrared heaters bounce infrared beams off of objects, warming them in the process. A conventional heater causes convectional currents, where the warm air rises, cools, and falls again, needing to be heated again. This makes them less efficient than the infrared heating technology.
That’s not all though – conventional heaters can also cause mould, mildew, cold spots and dust circulation, because of these warm air currents. This makes infrared heaters better for your health. Infrared technology is completely safe, as it just uses the same tech as your TV remote control! The heat is actually the same as the sun’s, but without any harmful UV radiation.
Our infrared panels come with a brand new, highly advanced premium FIR Coating to help maximise the performance of your heater. It’s heat-resistant – meaning it can withstand temperatures up to 200oC without yellowing over time.
Not only that, but it will also help the carbon crystal heating element inside the panel distribute the IR waves better than ever before, thanks to a higher thermal efficiency, resulting in even more warmth in your home.
To top it all off, the coating is also far more secure than ever before, as it is fire resistant, ensuring your family and your home stay safe and warm.
Fully Lot20 compliant, our NXTGEN heaters are really efficient, with a 39% out of 40% rating. They have automated temperature control, which regulates the temperature in your room. They come with a seven-day timer, so you can set different timers for the weekend and the weekdays.
With adaptive start, you can let the panel decide when it needs to come on to get your room to a specific temperature at a specific time.
Plus, with open window detection, they’ll turn off automatically when they detect a temperature drop of 1.5˚C in 3 minutes. For more information on these amazing NXTGEN heaters, see our NXT Gen IR Panel manual.
With the included remote control, you get total control over the different functions these NXTGEN panels bring.
You can adjust the temperature set timers, and change the adaptive start function with ease – all from the comfort of your own seat. There will be no more trekking to the thermostat or the boiler again!
The thermostat is, of course, electrical rather than mechanical, means that it’ll be much more accurate.
This means you can always make sure that you’re neither heating your home too much, nor wasting energy on doing so.
The remote can be paired to multiple heaters, so if you wish to control your heating as a group, you can.
With so many features available in each of our NXT Gen Panels, it might get a bit confusing as to when your panel should be on and when it should be off.
Enter our simple but effective blue LED light.
It’s a highly elegant and subtle solution – it simply lights up blue when the panel is on and beaming infrared heat all around your room. Then, when the panel switches off, the LED indicator will switch off too.
This allows you to see at a glance whether your panel is on or not, which could go some way to explain why you’re feeling a bit hot…or a bit cold!
These panels are very simple to install. They don’t require any complicated electrical work or plumbing, as they are plug-and-play compatible. They use a 2-metre long mains cable and a UK mains 3-pin plug, which makes them quick to start using.
To mount them on your wall or ceiling, just use the included stencil. It just needs a couple of screws in the wall, on which the two rear brackets of the panel sit comfortably.
If you wish to make your heater more portable, consider one of our infrared heater stands. Thanks to the slimline profile of the panels, they look stunning whether wall mounted or on a stand.
There’s no need to worry when you buy yourself one of our white infrared heating panels, as they all come with a brilliant 2-year warranty, to reassure you. This is upgradable to 5 years for free.
We also give you a fantastic 14-day home trial period, so if you change your mind about your purchase, you can either exchange it or get a refund.
Finance is a fantastic way to spread the cost of your purchase. To make it easy we've partnered with Duologi whose smart technology lets you apply for and then complete the loan application quickly and entirely online.
First add the items you wish to purchase to your basket. When you reach checkout select the best finance option for you and choose 'Pay with Duologi'. The quick application form takes no more than a couple of minutes to complete and then you'll receive an instant decision.
Before you apply please note you will only be considered for finance if you:
We offer a range of interest-free and interest bearing finance options to help you spread the cost of your purchase over 3, 6 or 12 months. The value of the loan needs to be over £300, all you need to do is pay a 20% deposit up front.
All panels come with free delivery within 2-3 days, and next day delivery is available for £5.99.
You can return your panel if you are not happy with it within 14 days of receiving it.
To install your panel or bar heater, drill 4 holes into your wall as per the mounting template provided with your heater.
For panels, insert the wall plugs, followed by the screws, and use the cross-hair bolt insertion hole brackets on the back of the panel to mount it in place.
For bar heaters, use the provided screws to mount the brackets onto your wall, and then onto the back of the heater. Use the provided wing nuts to secure the wall brackets and heater brackets together at an angle best suited for your area.
Plug the heater into your mains, or get a qualified electrician to hardwire it for you.
Infrared heaters use up to 60% less energy than electric convection heaters, because they warm up objects rather than the air.
As they have no moving parts, they require zero maintenance.
At just 22mm thick, and best installed at head height, they can save massive amounts of space, allowing you to use your entire floor space.
Our infrared panels are far better looking than conventional radiators, giving your home a more modern look.
Once they have reached the end of their huge 100,000 hour lifespan, they almost fully recyclable, further helping the environment even after they’re no longer fit for use.
Wattage | 1200w |
---|---|
Wi-Fi | No |
Manufacturer | Mirrorstone |
Surface Material | Premium FIR Coating |
Surface Temperature | 75-95°C |
Dimensions (mm) | 995mm x 1195mm x 22mm |
Frame Colour | White Aluminium |
IP Rating | IP54 - Protected against splashes of water |
Voltage | 230V |
Warranty | 2 Years Upgradable to 5 Years |
Panel Weight | 8kg |
Product Features | Built in Thermostat with Remote Control |
Requirements | Eco Design Requirements for Electric Local Space Heaters |