Check out the new and exciting way to heat your home whilst spending less money! The 350W Classic Infrared Heating Panel is a super-efficient infrared panel that can transform how you keep warm for the better. At just 595mm by 595mm, this panel is perfect for adding some extra warmth to your room without costing you as much as central heating.
With a premium FIR Coating surface, you know that you’re getting a quality product. This surface can reach a temperature of approximately 110˚C, but don’t worry, because these can be mounted well out of reach – high up on the wall, or even on the ceiling!
It’s IP54 rated, which means it can handle splashes of water quite comfortably. At 595mm by 595mm, the 350w can actually warm an area of around 5-6m2.
Please note that the advised heated areas are for guidance only. For a more accurate heated area that is more relevant to your home, please either use our Calculator located at the top of this page, or speak to one of our Customer Services advisors about your room.
If you wish to ceiling mount your IR Panel, you will need to purchase a Suspension Kit alongside it. We advise leaving a gap of at least 5cm between the ceiling and panel once installed in order to ensure adequate airflow behind the heater.
This panel will come with a clear film on its front that needs to be peeled off before first use. If you use the heater before peeling the film off, the film may discolour and melt onto the surface of the heater.
Infrared heating is an innovative way of heating your home that is both eco-friendly and attractive. It can actually save you up to 60% on your heating bills each time. It works by firing infrared beams around your room, which bounce off the objects, leaving them warm. It doesn’t heat the air, as conventional heaters do, so there are no warm air currents.
This also means that the risk of cold spots, mould growth, and dust circulation is massively minimised, as there are no currents there. Due to this, infrared heaters are better for your health than conventional heaters. Infrared heating is completely safe, as it just the same technology that the remote control for your TV uses. It’s the same kind of heat that the sun provides, yet without any ultraviolet waves.
Our infrared panels come with a brand new, highly advanced premium FIR Coating to help maximise the performance of your heater. It’s heat-resistant – meaning it can withstand temperatures up to 200oC without yellowing over time.
Not only that, but it will also help the carbon crystal heating element inside the panel distribute the IR waves better than ever before, thanks to a higher thermal efficiency, resulting in even more warmth in your home.
To top it all off, the coating is also far more secure than ever before, as it is fire resistant, ensuring your family and your home stay safe and warm.
Thanks to the clean white finish that the FIR Coating surface provides, you can hide this heater in plain sight, practically.
With this panel, it can blend in perfectly in a kitchen or bathroom environment, and add extra heat without resorting to a clunky radiator or an inefficient portable heater.
At just 22mm in depth, you don’t need to worry about this heater taking too much room up. In fact, with its fairly small size, this heater can be situated in a wide variety of different places.
As the heat they emit doesn’t rise to the ceiling, they can be mounted high on the wall, or even on the ceiling! This is because they heat the objects directly with multidirectional infrared beams.
No professional help will be required to help you fit this panel in your home. No plumbers, electricians or handymen/women, because they’re not required.
There is no complicated work required at all, as they just plug directly into the mains. Mounting them is just as easy, as they just need a couple of screws in the wall. They really are easy to install.
Using the guide required, you just draw through the holes to mark where the screws are needed, then simply hook the panel onto the screws using the two sturdy brackets on the rear.
It takes only minutes to do, before you have clean efficient heat in your home, and you can do it all by yourself.
Whilst there are many options as to how you use your 350W IR Panel – you can plug it in, hardwire it or use a thermostat with it – it might sometimes be handy to know when it’s on and when it isn’t.
That’s why this panel comes with a blue LED indicator in the corner.
Simply put, when the heater is on, the LED light will be too. When the panel is off, the LED light will be off too. This means you can tell whether the panel is actually emitting heat or not at a glance, without having to go up to it and hold your hand in front!
With Mirrorstone’s top quality build, you don’t need to worry. The brilliant glossy white surface is easy to wipe clean with a damp cloth, and that’s all the maintenance you’ll ever need. There are no moving parts when it comes to an infrared panel, so there’s no servicing or upkeep needed at all. The surface is made from sturdy FIR Coating too, so you’re all set.
On the back of the panel is a standard 240v junction box, with a generous 2 metres of heavy-duty flex and the standard UK 3-pin plug.
Don’t forget, if you wish to make your heater portable, you could always purchase one of our stylish infrared panel stands for a freestanding heating solution.
All of our white infrared heating panels come with a superb 14-day home trial period, so if you change your mind, you can either return or exchange it.
Mirrorstone also give you an incredible 2-year warranty, so there’s no need to worry about purchase protection. You can even upgrade your warranty to 5 years for free!
If you have any questions about this specific heater, or infrared heating in general, then don’t be afraid to give us a shout. Call us on 0116 321 4124, email us at firstname.lastname@example.org, or check out our Facebook and Twitter pages.
Finance is a fantastic way to spread the cost of your purchase. To make it easy we've partnered with Duologi whose smart technology lets you apply for and then complete the loan application quickly and entirely online.
First add the items you wish to purchase to your basket. When you reach checkout select the best finance option for you and choose 'Pay with Duologi'. The quick application form takes no more than a couple of minutes to complete and then you'll receive an instant decision.
Before you apply please note you will only be considered for finance if you:
We offer a range of interest-free and interest bearing finance options to help you spread the cost of your purchase over 3, 6 or 12 months. The value of the loan needs to be over £300, all you need to do is pay a 20% deposit up front.
All panels come with free delivery within 2-3 days, and next day delivery is available for £5.99.
You can return your panel if you are not happy with it within 14 days of receiving it.
To install your panel or bar heater, drill 4 holes into your wall as per the mounting template provided with your heater.
For panels, insert the wall plugs, followed by the screws, and use the cross-hair bolt insertion hole brackets on the back of the panel to mount it in place.
For bar heaters, use the provided screws to mount the brackets onto your wall, and then onto the back of the heater. Use the provided wing nuts to secure the wall brackets and heater brackets together at an angle best suited for your area.
Plug the heater into your mains, or get a qualified electrician to hardwire it for you.
Infrared heaters use up to 60% less energy than electric convection heaters, because they warm up objects rather than the air.
As they have no moving parts, they require zero maintenance.
At just 22mm thick, and best installed at head height, they can save massive amounts of space, allowing you to use your entire floor space.
Our infrared panels are far better looking than conventional radiators, giving your home a more modern look.
Once they have reached the end of their huge 100,000 hour lifespan, they almost fully recyclable, further helping the environment even after they’re no longer fit for use.
|Surface Material||Premium FIR Coating|
|Dimensions (mm)||595mm x 595mm x 22mm|
|IP Rating||IP54 - Protected against splashes of water|
|Warranty||2 Years Upgradable to 5 Years|
|Requirements||Eco Design Requirements for Electric Local Space Heaters|