Natural IR Heat
Hurry Now! 10% Off All Heaters! Use Code: TAKE10
Look at this wonderful heating invention – a heater that’s more efficient, and doesn’t even look like a heater! The 1200W Classic Infrared Heating Panel is a brilliant way to heat your home for less. It measures 995mm by 1195mm, and thanks to its 1200w of power, can heat an area that’s 18-19m2!
The panel is constructed from high-quality FIR Coating, which looks fantastic, and is sturdy, too. It can reach temperatures of approximately 115˚C, which is not much higher than a conventional radiator. However, it can be installed well out of reach, either high up on the wall, or even on the ceiling! It’s IP54 rated, so can deal with splashes of water – it also means you can give it a quick clean with a damp cloth!
Please note that the advised heated areas are for guidance only. For a more accurate heated area that is more relevant to your home, please either use our Calculator located at the top of this page, or speak to one of our Customer Services advisors about your room.
If you wish to ceiling mount your IR Panel, you will need to purchase a Suspension Kit alongside it. We advise leaving a gap of at least 5cm between the ceiling and panel once installed in order to ensure adequate airflow behind the heater.
This panel will come with a clear film on its front that needs to be peeled off before first use. If you use the heater before peeling the film off, the film may discolour and melt onto the surface of the heater.
Infrared heating is a method of interior heating that works very differently to how conventional radiators do. Rather than warming the air around it, infrared heating fires infrared beams around the room, which bounce off of the objects within, leaving them warmed. A traditional radiator warms the air around it, which can cause convectional currents.
Convectional currents are where the warm air rises to the ceiling, cools, and then falls again. This means it then needs to be heated again, which is inefficient. These currents also cause mould growth, cold spots, and dust circulation, which can be a negative influence on your health. The heat that infrared heaters provide is dry, non-stuffy, and completely clean. This is why infrared heaters are better for your health.
Infrared heating is completely safe, as it just uses the same technology as TV remote controls do. In fact, it’s actually the same kind of heat that the sun provides, but with no harmful UV radiation. And that’s not all – infrared heating can save your approximately 60% on your heating bills!
Our infrared panels come with a brand new, highly advanced premium FIR Coating to help maximise the performance of your heater. It’s heat-resistant – meaning it can withstand temperatures up to 200oC without yellowing over time.
Not only that, but it will also help the carbon crystal heating element inside the panel distribute the IR waves better than ever before, thanks to a higher thermal efficiency, resulting in even more warmth in your home.
To top it all off, the coating is also far more secure than ever before, as it is fire resistant, ensuring your family and your home stay safe and warm.
These panels are more than easy to install – you can do it all by yourself! That’s right, they’re easy enough to install that you just won’t need the help of plumbers or electricians or the like.
All they need is a little DIY – they’re completely plug-and-play compatible, so it’s just getting it onto your wall that you need to worry about.
And it’s not much of a worry, either. We supply a stencil in the box with every panel, so all you have to do is draw through the holes, and drill the holes into the wall.
With a couple of screws, you just have to hang the panel onto the screws using the two rear brackets.
You’ll be ready to go in just minutes, with no additional help required.
Given that you can use your panel by plugging it into the mains, hardwiring it, or by using a thermostat, it could potentially get a bit confusing as to when it’s actually supposed to be on or not.
That’s why we’ve integrated an LED light into the corner of the panel.
It works as easily as it sounds – when the panel is on, the LED light comes on so you know when your heater is beaming out infrared heat.
Conversely, when the panel is off, the LED light will be off too – it’s as simple as that!
With such a gorgeous clean white finish, it’s easy to disguise this panel as just another part of the wall. You can situate it in your bathroom or kitchen, where splashes of water don’t matter to the panel.
You can add extra heat to whichever room you choose, and you won’t need to resort to a bulky radiator, or an inconvenient and inefficient portable heater.
At just 22mm in depth, it can easily be mounted to the ceiling or wall without sticking out awkwardly.
Being able to be mounted on the ceiling is down to the way they actually disperse their heat. Because they fire infrared beams all over the room, you don’t have to worry about any hot air rising.
With a lovely glossy white finish, cleaning it is simple. Just a quick wipe with a damp cloth, and you’re sorted.
That’s all you’ll have to do to keep this panel doing fine, as there’s no maintenance or upkeep required at all. That’s right – unlike a boiler, that needs regular servicing and repairs, this panel will last for around 100,000 hours, or thirty years, without needing anything else spending on it.
On the rear is a standard 240v junction box, with 2m of heavy-duty flex cable, and a standard UK 3-pin plug. If you wish to make your heater portable, you could buy one of our infrared panel stands for a more flexible heating solution.
Included with our white infrared heating panels is a brilliant 14-day home trial period, so you could return or exchange it, if you change your mind.
Mirrorstone also provide these with an amazing 2-year warranty, so you can have peace of mind. This is extendable to 5 years for free.
If you require any extra info about this, or any of our other panels, then don’t be afraid to contact us. Call us on 0116 321 4124, email us at email@example.com, or check out our Facebook and Twitter pages.
Finance is a fantastic way to spread the cost of your purchase. To make it easy we've partnered with Duologi whose smart technology lets you apply for and then complete the loan application quickly and entirely online.
First add the items you wish to purchase to your basket. When you reach checkout select the best finance option for you and choose 'Pay with Duologi'. The quick application form takes no more than a couple of minutes to complete and then you'll receive an instant decision.
Before you apply please note you will only be considered for finance if you:
We offer a range of interest-free and interest bearing finance options to help you spread the cost of your purchase over 3, 6 or 12 months. The value of the loan needs to be over £300, all you need to do is pay a 20% deposit up front.
All panels come with free delivery within 2-3 days, and next day delivery is available for £5.99.
You can return your panel if you are not happy with it within 14 days of receiving it.
To install your panel or bar heater, drill 4 holes into your wall as per the mounting template provided with your heater.
For panels, insert the wall plugs, followed by the screws, and use the cross-hair bolt insertion hole brackets on the back of the panel to mount it in place.
For bar heaters, use the provided screws to mount the brackets onto your wall, and then onto the back of the heater. Use the provided wing nuts to secure the wall brackets and heater brackets together at an angle best suited for your area.
Plug the heater into your mains, or get a qualified electrician to hardwire it for you.
Infrared heaters use up to 60% less energy than electric convection heaters, because they warm up objects rather than the air.
As they have no moving parts, they require zero maintenance.
At just 22mm thick, and best installed at head height, they can save massive amounts of space, allowing you to use your entire floor space.
Our infrared panels are far better looking than conventional radiators, giving your home a more modern look.
Once they have reached the end of their huge 100,000 hour lifespan, they almost fully recyclable, further helping the environment even after they’re no longer fit for use.
|Surface Material||Premium FIR Coating|
|Dimensions (mm)||995mm x 1195mm x 22mm|
|IP Rating||IP54 - Protected against splashes of water|
|Warranty||2 Years Upgradable to 5 Years|
|Requirements||Eco Design Requirements for Electric Local Space Heaters|
The cable on my heater doesn't reach any of the plug sockets in my conservatory so I have been using an extension lead which looks unsightly and I am not entirely comfortable with to be honest..other than having a plug point fitted closer to the heater, have you any suggestions as to what I can do..cheers.
Once installed and plugged in you indicate that a green led light shows that the heating is on. How do you program the heating for certain times of the day and can you increase the temperature at particularly cold times in winter?
How much power is used to run a 1.8 kw bar heater at 22degrees for 4 hours ?
Are the panels suitable for placing behind sofas?
Hi, we are looking at these to fit to our conservatory roof. Can you advise the weight per 1200w panel? If we were wanting to put two in the same room can they be linked with the thermostat or do they need separate per panel ? If they do can you supply the next gen without a thermostat? Regards Gavin
Can't see the answer you're looking for? Feel free to ask any question about this product and our helpful, friendly staff will answer it as soon as possible.