Warm up your garden, home, warehouse or office with a brilliant infrared bar heater. Mirrorstone’s infrared heaters are efficient, eco-friendly, and more attractive than any conventional radiator. It measures approximately 980mm by 345mm, and with a 2200w power output, can heat an area of around 34m2. It has a depth of just 50mm, which means it can be installed on your ceiling or wall without sticking out too much.
It is made from aluminium and glass, which look superb. That’s not all, though; it has a premium feel that really reassures you of its quality. It can reach a surface temperature of around 200-300˚C, but this won’t be an issue. That’s because, although it’s hotter than a traditional radiator, it can be installed far out of reach. It can be installed high up on the wall, or even on the ceiling, so it’s unlikely you’ll accidentally touch it.
It is completely IP44 rated out of the box, so it’s protected against any accidental splashes of water. However, if it to be installed outside, we would recommend it is under cover, so that heavy rain cannot damage it.
Please note that the advised heated areas are for guidance only. For a more accurate heated area that is more relevant to your home, please either use our Calculator located at the top of this page, or speak to one of our Customer Services advisors about your room.
Infrared heating is a revolutionary way of heating your home that far outstrips a traditional heater. An infrared heater can actually save you around 60% on your heating bills! It does this through warming the objects in the room, rather than the air around it. This is far more efficient due to the surface area of the objects in the room being less than the volume of air.
It fires infrared beams around the room that bounce off of the objects, leaving them warmed. In contrast, a conventional radiator warms the air, which causes convectional currents. This is where the warm air rises, cools, and falls again, requiring more heat. This can also promote dust circulation, mould growth, and cold spots, which is why infrared heaters tend to be better for your health.
Infrared heating is also completely safe. It uses the same technology as your TV remote control, or even heat vision, and the heat it provides is the same that the sun’s. However, infrared heating does not produce any of the harmful ultraviolet radiation as the sun does.
Forget about getting any professional help in – installation is very easy to do. You won’t need plumbers or electricians – you won’t even need an assistant.
It’s a complete and utter DIY job, with no specialised knowledge or equipment necessary.
The heaters are completely plug-and-play compatible, so there’s no real work to do, other than actually getting it installed onto the wall.
There’s nothing difficult to do. All you have to do is drill a few holes in the wall ready for it to be mounted.
Simply screw the rear-mounted brackets into the wall or ceiling, and plug the cable into the wall. Remember, the brackets are adjustable, so you can target the heat at different areas of the room.
Please be aware that if the units are not cleaned regularly, a build-up of dust may appear. Find out more about how to maintain your heaters here!
If you’re hoping to control this heater at your own luxury, without having to move, without having to resort to walking over to use the control panel, then it’s your lucky day.
This heater is fully remote controllable, and the remote control is included! It’s so simple to use, it’s slim, it looks great, and it makes your life far more convenient.
You can change the temperature with ease, whether you need more or less heat to make you comfortable. You can turn the display on and off, if you wish to make the heater look a little more inconspicuous.
You can also set a sleep timer with the remote, if you wish for the heater to turn off after a certain amount of hours.
If you need to know what your bar heater is up to, but maybe it’s outside and you’re inside, then the uber-helpful LED screen has got you covered.
The digits in the middle of the screen let you know what your target temperature is, so you will always know when it’s on the right setting or not.
That’s not all, either. You can use it for establishing the sleep timer, so that you know when your heater will turn itself off.
The four flame shaped lights below the temperature are there to let you know if the bar heater is actually releasing heat or not. You can also lock the screen and its features, with a simple press of a button.
Supplied with all of our Mirrorstone infrared bar heaters is an impressive 14-day home trial period, so you could either return or exchange it, if you change your mind.
Mirrorstone also provide these with an outstanding five-year warranty, so you may shop with confidence.
If you need any extra information our infrared heaters, then don’t be afraid to get in touch. Call us on 0116 321 4124, email us at email@example.com, or have yourself a look at our Facebook and Twitter pages.
Finance is a fantastic way to spread the cost of your purchase. To make it easy we've partnered with Duologi whose smart technology lets you apply for and then complete the loan application quickly and entirely online.
First add the items you wish to purchase to your basket. When you reach checkout select the best finance option for you and choose 'Pay with Duologi'. The quick application form takes no more than a couple of minutes to complete and then you'll receive an instant decision.
Before you apply please note you will only be considered for finance if you:
We offer a range of interest-free and interest bearing finance options to help you spread the cost of your purchase over 3, 6 or 12 months. The value of the loan needs to be over £300, all you need to do is pay a 20% deposit up front.
All panels come with free delivery within 2-3 days, and next day delivery is available for £5.99.
You can return your panel if you are not happy with it within 14 days of receiving it.
To install your panel or bar heater, drill 4 holes into your wall as per the mounting template provided with your heater.
For panels, insert the wall plugs, followed by the screws, and use the cross-hair bolt insertion hole brackets on the back of the panel to mount it in place.
For bar heaters, use the provided screws to mount the brackets onto your wall, and then onto the back of the heater. Use the provided wing nuts to secure the wall brackets and heater brackets together at an angle best suited for your area.
Plug the heater into your mains, or get a qualified electrician to hardwire it for you.
Infrared heaters use up to 60% less energy than electric convection heaters, because they warm up objects rather than the air.
As they have no moving parts, they require zero maintenance.
At just 22mm thick, and best installed at head height, they can save massive amounts of space, allowing you to use your entire floor space.
Our infrared panels are far better looking than conventional radiators, giving your home a more modern look.
Once they have reached the end of their huge 100,000 hour lifespan, they almost fully recyclable, further helping the environment even after they’re no longer fit for use.
|Surface Material||Glass & Aluminium|
|Dimensions (mm)||980mm x 345mm x 50mm|
|IP Rating||IP44 - Protected against splashes of water|
|Warranty||2 Years Upgradable to 5 Years|