Natural IR Heat
Hurry Now! 10% Off All Heaters! Use Code: SUPER10
Bring your home into the future with the latest and greatest in discreet heating technology – the infrared heating panel. Measuring 595mm by 1195mm, this heater has the capability of heating a space of around 11-12m2, thanks to the 700w of power. Thanks to the depth of just 22mm, it’s simple to mount on your wall or ceiling for a heating solution that looks gorgeous.
Made from superior FIR Coating, this heater can reach temperatures of 75-95˚C. This is very close to the temperature of a conventional radiator, but you can actually hide it out the way high up on the wall or ceiling, whereas a conventional radiator could, or course, not. It comes fully IP54 rated, so it is protected against any splashes of water.
Please note that the advised heated areas are for guidance only. For a more accurate heated area that is more relevant to your home, please either use our Calculator located at the top of this page, or speak to one of our Customer Services advisors about your room.
By choosing the ceiling mount option when purchasing your panel, a Suspension Kit will also be dispatched with your order. We advise leaving a gap of at least 5cm between the ceiling and panel once installed in order to ensure adequate airflow behind the heater.
This panel will come with a clear film on its front that needs to be peeled off before first use. If you use the heater before peeling the film off, the film may discolour and melt onto the surface of the heater.
Firstly, infrared heating is extremely eco-friendly, and saves you plenty of money on your heating bills. These are the headline features, but there’s still plenty more. Did you know that they can save you up to 60% on your heating bills?
The way they work is by firing infrared beams around your room, which bounce off objects, leaving them warm. This is much more efficient than conventional convection heaters, which cause warm air currents that rise, cool, and fall back to the floor. As infrared heaters don’t do this, there’s no need to worry about mould, mildew, cold spots, or dust circulation, leaving clean non-stuffy air that can benefit your health.
Infrared technology is completely safe, as it uses the same technology inside your TV remote controls.
Our infrared panels come with a brand new, highly advanced premium FIR Coating to help maximise the performance of your heater. It’s heat-resistant – meaning it can withstand temperatures up to 200oC without yellowing over time.
Not only that, but it will also help the carbon crystal heating element inside the panel distribute the IR waves better than ever before, thanks to a higher thermal efficiency, resulting in even more warmth in your home.
To top it all off, the coating is also far more secure than ever before, as it is fire resistant, ensuring your family and your home stay safe and warm.
Compliant with the Lot20 regulations, we’ve introduced the NXTGEN of heaters, which are both smart and efficient. They have a rating of 39% out of a possible 40%.
They have automated temperature control, which regulates the temperature of the room to one that you choose. You get a 7-day timer with them, so you can have timers for work days and play days.
The adaptive start saves you time and energy. Rather than guessing how long it’ll take to get your home warm, this panel does the work for you, and gets your room warm on time.
It also comes with open window detection, so if it detects the temperature has dropped by 1.5˚C in 3 minutes, it switches off. For extra info, see our NXT Gen IR Panel manual.
Included in the box with every NXTGEN panel is an incredible remote control that allows you to take control of the fantastic functions that these panels offer.
It’s simple to use, and has a little screen on it so you know exactly what you’re doing. It controls the electronic thermostat, which is of course much more accurate than a mechanical thermostat. This means you can have total control over how hot or cold you wish your room to be.
You can adjust the temperature of the panel, and set different timers. You can also set the adaptive start function, which helps to save time and energy.
Finally, don’t underestimate the helpfulness that is being able to control your heating from the comfort of your seat.
What with temperature controls, adaptive starts and open window detection, knowing when your panel is on or off might become a bit difficult. We’ve thought of this and how we can make life easier.
This is where our blue LED indicator enters the fray.
It’s a highly simple solution – it lights up blue when the panel is on and emitting heat, and it switches off when the panel is no longer emitting heat.
This way, you know when your panel is on and when it isn’t, making it far easier to track than if it wasn’t there!
These panels are not difficult to install at all – in fact, they’re far from it. There’s no complicated plumbing or electrical work involved, as they simply don’t need it. They are plug-and-play compatible.
To mount them on the wall, all you have to do is use the included stencil to mark where the holes need to go on the wall. Once the screws are in, it’s simple to hang the panel on the wall, using the two brackets on the back.
The panels come with a 2m long cable, and a UK mains 3-pin cable, so it’s easy to get up and running. You can make these heaters portable by using one of our infrared heater stands. As they’re so slim and discreet, they look brilliant either mounted or stood.
All of our white infrared heating panels come with an extensive 2-year warranty, to reassure you about your purchase. This is extendable to 5 years at no extra cost.
We also give you a superb 14-day home trial period, so if you change your mind about your panel, you can either exchange it or get a refund.
If you need some extra information about this panel, or infrared heating in general, then don’t be afraid to get in touch. Call us on 0116 321 4124, email us at firstname.lastname@example.org, or check out our Facebook and Twitter pages.
Finance is a fantastic way to spread the cost of your purchase. To make it easy we've partnered with Duologi whose smart technology lets you apply for and then complete the loan application quickly and entirely online.
First add the items you wish to purchase to your basket. When you reach checkout select the best finance option for you and choose 'Pay with Duologi'. The quick application form takes no more than a couple of minutes to complete and then you'll receive an instant decision.
Before you apply please note you will only be considered for finance if you:
We offer a range of interest-free and interest bearing finance options to help you spread the cost of your purchase over 3, 6 or 12 months. The value of the loan needs to be over £300, all you need to do is pay a 20% deposit up front.
All panels come with free delivery within 2-3 days, and next day delivery is available for £5.99.
You can return your panel if you are not happy with it within 14 days of receiving it.
To install your panel or bar heater, drill 4 holes into your wall as per the mounting template provided with your heater.
For panels, insert the wall plugs, followed by the screws, and use the cross-hair bolt insertion hole brackets on the back of the panel to mount it in place.
For bar heaters, use the provided screws to mount the brackets onto your wall, and then onto the back of the heater. Use the provided wing nuts to secure the wall brackets and heater brackets together at an angle best suited for your area.
Plug the heater into your mains, or get a qualified electrician to hardwire it for you.
Infrared heaters use up to 60% less energy than electric convection heaters, because they warm up objects rather than the air.
As they have no moving parts, they require zero maintenance.
At just 22mm thick, and best installed at head height, they can save massive amounts of space, allowing you to use your entire floor space.
Our infrared panels are far better looking than conventional radiators, giving your home a more modern look.
Once they have reached the end of their huge 100,000 hour lifespan, they almost fully recyclable, further helping the environment even after they’re no longer fit for use.
|Surface Material||Premium FIR Coating|
|Dimensions (mm)||595mm x 1195mm x 22mm|
|Frame Colour||White Aluminium|
|IP Rating||IP54 - Protected against splashes of water|
|Warranty||2 Years Upgradable to 5 Years|
|Product Features||Built in Thermostat with Remote Control|
|Requirements||Eco Design Requirements for Electric Local Space Heaters|
Can the 700w NXT Gen panel me mounted vertically and horizontally?
2 questions 1 how long is the electric cable from the unit to the plug? 2 the remote unit says 7 day timer but how many on off programs per day ?
I think I need 2 panels for my lounge diner, can I use one remote for both
Hello, could you tell me how the wires are hidden. I wouldn’t want wires running down/up the walls. The spec says they are provided with a 3 point plugs so they’re ready to go, but can the wires be buried in the walls and can they be hard wired. Or buried and still have the 3 point plug on. Many thanks, Diane
Can the panel be placed under a window, surrounded then by kitchen units?
Hi, What is the minimum room height needed for ceiling mounting one of these panels? We have a fairly low ceiling, 2.1 metres. Is that too low? Thanks!
Hi There, I am looking to install IR panels in the main rooms of a house- is it just the NXT Gen panels that have a remote control, or are any of the mirrored panels available with the remote and receiver? I would prefer to mainly have mirrored panels, and attach to walls. Thanks
Hi, is it possible to mount these flush in a cut out of a plasterboard ceiling?
Hi. I'm looking at installing one of these units in a garden office. Can you tell me the weight, also is it OK to mount on a wooden lined interior skeiling, assume I'd use the wall mounts for this?. One last thing, any info on what the remote offers?
Can't see the answer you're looking for? Feel free to ask any question about this product and our helpful, friendly staff will answer it as soon as possible.