This panel is currently available for pre-order and will be with us around 28th May 2021. We apologise for any inconvenience caused.
Join the NXTGEN of interior heating with an incredible new infrared heating panel. Better looking and more efficient, this panel measures 795mm by 1195mm, and can heat an area of around 15m2, thanks to its 900W. With a depth of just a slender 22mm, you can easily fit this flush against your ceiling or wall for a discreet looking heating solution.
This panel has an excellent FIR Coating surface which can reach temperatures of around 75 to 95˚C. There’s no need to worry, however, as this is a similar temperature to conventional radiators, and these can also be mounted on the ceiling, or higher up on the wall. They’re IP54 rated, too, so there’s no need to worry if it gets splashed with water.
Please note that the advised heated areas are for guidance only. For a more accurate heated area that is more relevant to your home, please either use our Calculator located at the top of this page, or speak to one of our Customer Services advisors about your room.
By choosing the ceiling mount option when purchasing your panel, a Suspension Kit will also be dispatched with your order. We advise leaving a gap of at least 5cm between the ceiling and panel once installed in order to ensure adequate airflow behind the heater.
This panel will come with a clear film on its front that needs to be peeled off before first use. If you use the heater before peeling the film off, the film may discolour and melt onto the surface of the heater.
Infrared heating is super eco-friendly, and it can save you money on your heating bills. In fact, it’s so efficient it can actually save you a massive 60% on your heating bills – every month! It does this by actually heating what needs to be heated – the objects in the room, and not the air. It fires infrared beams around your room, which bounce off of objects and warm them up. By not warming the air like conventional heaters, you can avoid dust circulation, cold spots, and mould, as there are no warm air currents. This can improve your health.
Infrared heating is completely safe, as it uses the same technology that’s found in your TV remote control. In fact, their heat is the same as the sun’s, without any harmful UV rays!
Our infrared panels come with a brand new, highly advanced premium FIR Coating to help maximise the performance of your heater. It’s heat-resistant – meaning it can withstand temperatures up to 200oC without yellowing over time.
Not only that, but it will also help the carbon crystal heating element inside the panel distribute the IR waves better than ever before, thanks to a higher thermal efficiency, resulting in even more warmth in your home.
To top it all off, the coating is also far more secure than ever before, as it is fire resistant, ensuring your family and your home stay safe and warm.
Our NXTGEN heaters are completely Lot20 compliant, making them both smart and efficient. With a rating of 39% out of a maximum 40%, these heaters go above and beyond what’s necessary.
They come with automated temperature control, which means the panel does the hard work to regulate the temperature in your room. They come with a seven-day timer, so you can set different timers for both the weekend and weekdays.
With adaptive start, you’ll be able to let the panel do the hard work in ensuring your room is at a certain temperature at a certain time. Plus, they have open window detection, so if it detects that the temperature has dropped 1.5˚C in three minutes, then they switch off. For more information, see our NXT Gen IR Panel manual.
Included with every single one of our NXTGEN panels is the brilliant remote control. This allows you to control every single aspect of the infrared heating panel from the comfort of your own seat.
This cannot be underestimated – you’ll wonder why you ever bothered trekking to your boiler or thermostat before. You can adjust the temperature, set timers, and change the adaptive start function with ease.
The thermostat is electrical, rather than mechanical, which means a much greater level of accuracy is ensured. This means you can always make sure that you’re neither heating your home too much, nor wasting energy on doing so.
The remote can also be paired to multiple infrared heating panels, so you can control your heating as a group.
With so many functions and settings available in our NXT Gen Panels, it might become tricky knowing when the panel is supposed to be on and when it isn’t. There’s no need to worry though, as we’ve prepared a solution.
Included inside every NXT Gen panel is a blue LED light that turns on when the panel is on and emitting infrared all around your room. Conversely, it switches off when the panel stops emitting heat. This means you can tell, at a glance, when your panel is on and when it isn’t, making it easier to see if it’s doing its job!
These panels are easy to install. They require absolutely no fancy electrical work or plumbing, as they are completely plug-and-play compatible. They just simply have a 2m mains cable and a UK mains 3-pin plug, which makes them very easy to get running.
In terms of mounting them on your wall or ceiling, just use the stencil provided. It just takes a couple of screws in the wall, on which the two rear brackets of the panel rest nicely.
Don’t worry when you purchase one of our white infrared heating panels, as they all come with a fantastic 2-year warranty, to give you peace of mind. You can also upgrade this to 5 years at no extra cost.
We also give you a brilliant 14-day home trial period, so if you change your mind about your purchase, you can either exchange it or get a refund.
If you wish to know some more about infrared heating in general, then don’t be afraid to get in touch. Call us on 0116 321 4124, email us at firstname.lastname@example.org, or check out our Facebook and Twitter pages.
Finance is a fantastic way to spread the cost of your purchase. To make it easy we've partnered with Duologi whose smart technology lets you apply for and then complete the loan application quickly and entirely online.
First add the items you wish to purchase to your basket. When you reach checkout select the best finance option for you and choose 'Pay with Duologi'. The quick application form takes no more than a couple of minutes to complete and then you'll receive an instant decision.
Before you apply please note you will only be considered for finance if you:
We offer a range of interest-free and interest bearing finance options to help you spread the cost of your purchase over 3, 6 or 12 months. The value of the loan needs to be over £300, all you need to do is pay a 20% deposit up front.
All panels come with free delivery within 2-3 days, and next day delivery is available for £5.99.
You can return your panel if you are not happy with it within 14 days of receiving it.
To install your panel or bar heater, drill 4 holes into your wall as per the mounting template provided with your heater.
For panels, insert the wall plugs, followed by the screws, and use the cross-hair bolt insertion hole brackets on the back of the panel to mount it in place.
For bar heaters, use the provided screws to mount the brackets onto your wall, and then onto the back of the heater. Use the provided wing nuts to secure the wall brackets and heater brackets together at an angle best suited for your area.
Plug the heater into your mains, or get a qualified electrician to hardwire it for you.
Infrared heaters use up to 60% less energy than electric convection heaters, because they warm up objects rather than the air.
As they have no moving parts, they require zero maintenance.
At just 22mm thick, and best installed at head height, they can save massive amounts of space, allowing you to use your entire floor space.
Our infrared panels are far better looking than conventional radiators, giving your home a more modern look.
Once they have reached the end of their huge 100,000 hour lifespan, they almost fully recyclable, further helping the environment even after they’re no longer fit for use.
|Surface Material||Premium FIR Coating|
|Dimensions (mm)||795mm x 1195mm x 22mm|
|Frame Colour||White Aluminium|
|IP Rating||IP54 - Protected against splashes of water|
|Warranty||2 Years Upgradable to 5 Years|
|Product Features||Built in Thermostat with Remote Control|
|Requirements||Eco Design Requirements for Electric Local Space Heaters|